The DM1100 ExcelBand™ 50 bp DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct gel loading. The DNA ladder DM1100 is composed of 17 individual DNA fragments: 1.5k, 1.2k, 1k, 900, 800, 700, 600, 500, 450, 400, 350, 300, 250, 200, 150, 100, and 50 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (500 bp and 200 bp) for easier reference. In addition, the low range Orange G tracking dye mimics the migration of a 50 bp dsDNA during electrophoresis is also added for real time monitoring.
Detail
Description
The DM1100 ExcelBand™ 50 bp DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct gel loading. The DNA ladder DM1100 is composed of 17 individual DNA fragments: 1.5k, 1.2k, 1k, 900, 800, 700, 600, 500, 450, 400, 350, 300, 250, 200, 150, 100, and 50 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (500 bp and 200 bp) for easier reference. In addition, the low range Orange G tracking dye mimics the migration of a 50 bp dsDNA during electrophoresis is also added for real time monitoring.
Features
Sharp bands
Quick reference— enhanced bands
Ready-to-use— premixed with loading dye for direct loading
Stable— room temperature storage over 6 months
Source
Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.
Range
50 ~ 1,500 bp
Concentration
54 µg/ 500 µl
Recommended loading volume
5 µl/ well
Storage
Room temperature for 6 months 4°C for 12 months -20°C for 36 months
Other Products
100 b RNA Ladder
Product Info
Document
Product Info
Overview
Eight discrete bands, ranging from 100 to 1,000 bases
Higher intensity band at 500 bases for easy reference
No need for staining or destaining as loading dye contains ethidium bromide
Convenient lyophilized format provides better product stability
The Norgen 100 b RNA Ladder is a set of RNA transcripts derived from recombinant DNA templates. This ladder is suitable for precise sizing of small RNA molecules using native or denaturing agarose gels, and can be easily visualized under UV.
To reconstitute the lyophilized RNA ladder, add 250 µL of 1x loading buffer to each 25 loads vial and vortex gently. Heat at 80°C for 10 minutes. Incubate on ice for 1 min. Load 10 µL on a 1.5-2% gel. For optimal results, use Norgen 2x loading buffer with each RNA sample. There is no need for staining and destaining denaturing gels since Norgen’s loading buffer contains ethidium bromide.
The series of DNA Size Selection Kits (Magnetic Beads) were developed for DNA size selection using magnetic beads. A total of 11 kits are available, with different selection ranges spanning from 50 bp to over 10 kb. The kits provide a simple and quick approach for the enrichment of a specific range of DNA fragments. The kit workflow allows double-sided or single-sided size selection for specific size cutoffs.
Gel images of different ranges of size selection. Sheared human genomic DNA was used as input.
.
DNA size selection is a selective capture of DNA fragments of a specific range of size for next-generation sequencing (NGS) library preparations, PCR, ChIP assay, DNA ligations, endonuclease digestions, adapter removal, and other genomics and molecular biology applications. DNA size selection is preferred after NGS library prep in most of the cases. The NGS library preparation is related to the quality of the sequencing data. Precise NGS library size selection can increase sequencing efficiency, improve data quality, and reduce costs.
There are two types of sequencing technologies: short-read sequencing and long-read sequencing. Short-read sequencing uses DNA libraries that contain small insert DNA fragments of similar sizes, usually several hundred base pairs. The sequencing efficiency can be improved if the DNA size selection is in the right range. Cat.# 20104S and 20104L are the best kits for NGS library size selection of illumina paired-end 100 (PE100) sequencing with 100-200 bp library inserts; Cat.# 20105S and 20105L are the best kits for NGS library size selection of illumina paired-end 150 (PE150) sequencing with 150-300 bp library inserts; and Cat.# 20106S and 20106L are the best kits for NGS library size selection of illumina paired-end 300 (PE300) sequencing with 300-600 bp library inserts.
Long-read sequencing uses a large DNA fragment as input and makes very long reads. Usually, library size selection is preferred to remove smaller fragments. Cat.# 20110S and 20110L are the best kits for long-read sequencing size selection with DNA sizes >5 kb, and Cat.# 20111S and 20111L are the best kits for long-read sequencing size selection with DNA sizes >10 kb.
The magnetic beads technology uses paramagnetic particles, also known as SPRI (Solid Phase Reversible Immobilization) beads, to bind DNA reversibly and selectively. DNA fragments can be size-selected and purified by changing the properties of the magnetic beads or SPRI beads. The magnetic beads can easily separate the beads-binding DNA from the contaminants and unwanted components in the samples. The samples after DNA size selection are free of contaminants such as buffer components, enzymes, proteins, salts, dNTPs, primers, and adapters. Our proprietary magnetic beads reagents improve yield, selectivity, and reproducibility.
Specific DNA fragments at a certain length range can be purified simply using magnetic separation with different beads components, avoiding tedious and time-consuming gel extraction and column-based purification. The magnetic beads method is popular for common DNA size selection, including library size selection. The first beads-binding step, referred to as the right-side clean-up, removes large DNA fragments. The large DNA fragments are bound to the beads and are discarded. The desired DNA fragments in the supernatant are transferred to a new well, and new beads are added to the supernatant for the second beads-binding, referred to as the left-side clean-up. The double-size selected DNA fragments are eluted after ethanol rinsing.
DNA size selection with dual clean-ups.
.
A single clean-up is needed for DNA size selection with large fragments. In this case, only the large DNA fragments are bound to the beads. The selected larger DNA fragments are eluted after ethanol rinsing.
DNA size selection with single clean-up for >5 kb and >10 kb DNA.
.
Features of DNA size selection and library size selection
High specificity and high recovery of size selection
11 selection ranges are available, including 5 ranges for NGS library size selection
50-100 bp
100-200 bp
200-500 bp
250-350 bp: ideal for illumina PE100 sequencing
300-450 bp: ideal for illumina PE150 sequencing
450-750 bp: ideal for illumina PE300 sequencing
500-1000 bp
1-3 kb
1-5 kb
>5 kb: ideal for long-read sequencing
>10 kb: ideal for long-read sequencing
Fast and simple
20-min protocol
No gel purification required
No columns required
No centrifugation required
Efficient removal of contaminants and unwanted components
* Optical system: equipped with infinite flat field optical system, the whole machine mildew prevention design and large field eyepiece, with beautiful appearance, clear imaging, broad vision, convenient operation and other characteristics, can be widely used in biology, medicine, industry, agriculture and other fields, is the ideal instrument for medical, teaching, scientific research and other units
* Observation head device: the cylinder can rotate 360 degrees, the displacement of the center of the mirror is 0.06mm; 30 tilt; the hinge type binocular observation (the magnification difference between left and right systems is 2.0%; the end position difference is 0.1mm at zero vision) and the third party connection port, the pupil distance adjustment range is 50-75mm, the fixed observation cylinder head is internal hexagon screw or select portable screw.
* Eyepiece configuration: random eyepiece WF10X / 22mm; the magnification accuracy of eyepiece shall not exceed ± 2%. There is a card slot on the eyepiece tube to lock the eyepiece to prevent falling. Binocular vision is adjustable, making binocular observation easier;
* Loading platform: triangular rail XY composite mechanical moving loading platform; 0.005 lateral to 5N horizontal force, corrosion resistance and wear resistance. Rectangular, size 190X140mm, stroke 6090mm, minimum read value 0.1 mm.
Parameter of microscope
Specification configuration
TL36A
Binocular observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm
TL36B
Three-eye observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm.
TL36M
Three-eye viewing head with 6.3 megapixel imaging system CMOS camera
TL36P
Three-eye viewing head, equipped with 10.1 inch integrated flat panel display
Eyepiece
Wide-angle eyepiece WF10X,field of view 22mm,optional WF16X,WF25X
Converter
Quadruple Revolving converter
0bjective
Flat field achromatic objective at infinite distance,4X,10X,40X,100X(oil)
Condenser
ABBE N.A.1.25Condenser with Iris Diaphragm &Filter
Stage
Double Layer Mechanical Stage, Size1190X140mm, Moving Range : 60mmx90mm
Focusing
0.02mmCrude motion, micromotion and coaxial focal adjustment system with a minimum focal range of 0.02mm Coarse and Fine Focusing
Light source
3W LED,with Rechargeable Battery,Type C USB cable
Attachments
Dust bag,Type C power cord
Document
TL 36 series biological microscopes are equipped with infinite distance flat field achromatic objective and large field eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, can be widely used in biology, medicine, industry, agriculture and other fields, is the ideal instrument for medical, teaching, scientific research and other units
