[NS1001] FluoroVue™ Nucleic Acid Gel Stain (10,000X), 500 μl x 5
Facebook
X
Pinterest
Email
FluoroVue™ Nucleic Acid Gel Stain (10,000X) is specially designed for in-gel use and is a safer replacement for conventional Ethidium bromide (EtBr), which poses a significant health and safety hazard to its users. It is a fluorescent stain which offers highly sensitive detection of double-stranded or single-stranded DNA and RNA in a convenient manner. FluoroVue™ Nucleic Acid Gel Stain offers high sensitivity that is several times greater than EtBr.
FluoroVue™ Nucleic Acid Gel Stain is compatible with both conventional UV gel-illumination systems as well as harmless long wavelength blue light illumination systems, like B-BOX™. When bound to nucleic acids, FluoroVue™ Nucleic Acid Gel Stain has a fluorescent excitation maximum of 250 and 482 nm, and an emission maximum of 509 nm. Therefore, it can replace EtBr without the need of changing existing lab imaging systems.
Detail
Description
FluoroVue™ Nucleic Acid Gel Stain (10,000X) is specially designed for in-gel use and is a safer replacement for conventional Ethidium bromide (EtBr), which poses a significant health and safety hazard to its users. It is a fluorescent stain which offers highly sensitive detection of double-stranded or single-stranded DNA and RNA in a convenient manner. FluoroVue™ Nucleic Acid Gel Stain offers high sensitivity that is several times greater than EtBr.
FluoroVue™ Nucleic Acid Gel Stain is compatible with both conventional UV gel-illumination systems as well as harmless long wavelength blue light illumination systems, like B-BOX™. When bound to nucleic acids, FluoroVue™ Nucleic Acid Gel Stain has a fluorescent excitation maximum of 250 and 482 nm, and an emission maximum of 509 nm. Therefore, it can replace EtBr without the need of changing existing lab imaging systems.
Features:
Excellent for in-gel staining
Sensitivity: 0.14 ng (DNA) or 1 ng (total RNA)
A safer alternative to EtBr
Compatibility: suitable to blue or UV light
Increased cloning efficiency (blue light)
Storage
Protected from light 4°C for 12 months -20°C for 24 months
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
Key Features
User-friendly gel cassette:
Numbered and framed wells for sample loading
Labeled warning sign and green tape as reminder
Enhanced gel performance:
Enhanced band sharpness
Better resolution of small proteins
Stable for shipping at ambient temperature
Easy compatibility:
Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
Compatible with most popular protein electrophoresis systems
Storage and stability
Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.
Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis.
Keep Q-PAGE™ Precast Gels flat during storage.
Document
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
DirectBlood Genotyping PCR Kit is a novelty on the market. It allows genotyping in real-time and without any previous DNA isolation. You simply save time and money: directly use EDTA blood without any extraction steps. The DirectBlood Genotyping PCR Kit is optimized to function with a wide range of different SNPs to detect possible nucleotide variations. It has been successfully tested with a variety of hydrolysis probes and hybridization probes.The setup of a genotyping experiment can not be simpler anymore: Mix primers&probes with the Genotying mastermix, add the respective blood sample and start real-time PCR, this is it.
It is even more simple: store the DirectBlood Genotyping PCR Kit at room-temperature. A cool chain is not needed anymore. The included master mix is freeze-dried and dissolves within a few seconds after addition of the rehydration buffer.Additionally, we have already established SNP-assays for you. In case, you can not find your respective SNPs, please provide us with the rs-number of the SNP-assays your are interested-in and you will receive an individual quotation from us.For research use and further manufacturing.In case you are aiming to use our RUO products as components or for your development of e.g. an IVD medical device, please contact us.
DirectBlood Genotyping Kit (#5000) performance with a hydrolysis probe assay
The DirectBlood Genotyping Kit is compatible with a wide range of assays: Here we are detecting a SNP in the Factor V gene (rs6025; G1691A), which is connected with a higher risk for venous thrombosis, with a fluorescent hydrolysis probe assay.
Homozygous wild type blood samples will show a strong signal and amplification plot (blue curve) in channel 2 (Cy5) and none or a very low signal
(red curve) in the other channel 1 (ROX).
Heterozygous blood samples will give an intermediate signal and amplification plots with very similar intensities in both channels 1 and 2 (blue and red curve). Homozygous mutant blood samples, channel 1 (ROX) will show a strong signal and amplification plot (red curve) and channel 2 (Cy5) none or a very low signal and amplification plot (blue curve). So the signals are reversed on homozygous mutant samples.
DirectBlood Genotyping Kit performance with a hybridization probe assay
Here we are detecting the same SNP in the Factor V gene (rs6025; G1691A), which is connected with a higher risk for venous thrombosis, with a fluorescent hybridization probe assay.
Three blood samples with known genotype were used. All the genotypes can clearly be identified. The blue curve shows the specific wild type (homozygous G;G) peak at 61°C. The red curve shows the specific mutant (homozygous A;A) peak at 53°C. A heterozygous case (A;G) will result in both melting curve peaks, respectively at the same specific temperature for wild type and mutant (orange curve).
Document
DirectBlood Genotyping PCR Kit is a novelty on the market. It allows genotyping in real-time and without any previous DNA isolation. You simply save time and money: directly use EDTA blood without any extraction steps. The DirectBlood Genotyping PCR Kit is optimized to function with a wide range of different SNPs to detect possible nucleotide variations. It has been successfully tested with a variety of hydrolysis probes and hybridization probes.
