This product allows rapid and reliable isolation of high-quality genomic DNA from various soil, stool, and other environmental samples. Up to 500mg soil, 100mg stool, or 0.5g environmental samples can be processed in 60 minute. Purified DNA is suitable for PCR, restriction digestion, and next-generation sequencing.
Detail
Introduction
This product allows rapid and reliable isolation of high-quality genomic DNA from various soil, stool, and other environmental samples. Up to 500mg soil, 100mg stool, or 0.5g environmental samples can be processed in 60 minute. Purified DNA is suitable for PCR, restriction digestion, and next-generation sequencing.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from 250-500mg soil sample
Applications
PCR, southern blot and enzyme digestion, etc.
Purification technology
Magnetic beads technology
Process method
Manual or automatic
Sample type
Soil
Sample amount
250-500mg
Elution volume
≥50μl
Time per run
≤70 minutes
Principle
This product is based on the purification method of high binding magnetic particles. Soil sample is homogenized and then treated in a specially formulated buffer containing detergent to lyse bacteria, yeast, and fungal samples. Humic acid, proteins, polysaccharides, and other contaminants are removed using our propietary Absorber Solution. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing buffer to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.
Advantages
High concentration – maximum extraction of total DNA from soil samples
High purity – purified DNA can be directly used in various downstream applications
Kit Contents
Contents
D635601
D635602
D635603
Purification Times
48 Preps
96 Preps
5 x 96 Preps
MagPure Particles
2.5 ml
5 ml
22 ml
2ml Bead Tubes
48
96
400
Buffer SOL
60 ml
100 ml
500 ml
Buffer SDS
6 ml
10 ml
50 ml
Reagent DX
1 ml
1 ml
5 ml
Buffer PS
10 ml
20 ml
90 ml
Absorber Solution
10 ml
20 ml
90 ml
Buffer GDP
70 ml
150 ml
2 x 350 ml
Buffer GW1*
22 ml
44 ml
220 ml
Elution Buffer
20 ml
20 ml
60 ml
Storage and Stability
MagPure Particles and Absorber Solution should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
Experiment Data
Other Products
D3111 HiPure Blood DNA Mini Kit
Product Info
Document
Product Info
Introduction
Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:
1. The sample is highly infectious, posing great harm to operators and the environment.
2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;
3. Blood sample contains a large amount of impurities and inhibitory factors.
Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.
The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.
This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA(e.g., genomic, viral, mitochondrial) can be purified from whole blood (fresh or frozen), plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from 200ul Whole Blood
Applications
PCR, southern bolt and virus detection, etc
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Whole Blood (fresh or frozen), serum, plasma, milk, saliva, and other liquid samples and cultured cells
Sample amount
<200μl whole blood or other liquid samples, <5*106 lymphocytes or Culture CellsNon mammalian animals that have nucleus in red blood cells (rich in DNA, such as birds and fish) : 5~20μl whole blood at a time
Elution volume
≥20μl
Time per run
≤30 minutes
Liquid carrying volume per column
800µl
Binding yield of column
100µg
Principle
This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
Fast – without separation of leukocytes, organic extraction or ethanol precipitation
Simple – all nucleic acids can be obtained by direct digestion
Wide applicability- handle a variety of liquid samples
Kit Contents
Contents
D311102
D311103
Purification Times
50
250
HiPure DNA Mini Columns I
50
2 x 125
2ml Collection Tubes
100
5 x 100
Buffer AL
15 ml
60 ml
Buffer DW1
30 ml
150 ml
Buffer GW2*
12 ml
50 ml
Proteinase K
24 mg
120 mg
Protease Dissolve Buffer
1.8 ml
10 ml
Buffer AE
15 ml
60 ml
Storage and Stability
Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions.
Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:
Propargyl-PEG3-acid is a reagent with an alkyne group and a carboxylic acid. The terminal carboxylic acid can form amide bond with primary amines (activation is needed). The alkyne can form triazole linkage with azide containing molecules via copper catalyzed reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Document
Propargyl-PEG3-acid is a reagent with an alkyne group and a carboxylic acid. The terminal carboxylic acid can form amide bond with primary amines (activation is needed). The alkyne can form triazole linkage with azide containing molecules via copper catalyzed reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from tissue / blood / body fluid / swab /dry blood spots
Applications
PCR, qPCR, southern bolt and virus detection, etc.
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
Fast – without separation of leukocytes, organic extraction or ethanol precipitation
Simple – all nucleic acids can be obtained by direct digestion
Wide applicability – It can handle various liquid samples, animal tissues and cultured cells
Kit Contents
Contents
IVD3018
Purification Times
100
HiPure DNA Mini Columns I
100
2ml Collection Tubes
2 x 100
Buffer ATL
60 ml
Buffer AL
60 ml
Buffer GW1
44 ml
Buffer GW2
50 ml
Proteinase K
60 mg
Protease Dissolve Buffer
5 ml
Buffer AE
15 ml
Storage and Stability
Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2–8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
Experiment Data
Document
This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.
