Overview

• Extract high quality & quantity total RNA including miRNA
• No phenol step required; isolate all RNA in one fraction
• Bind & elute all RNA irrespective of size or GC content, without bias
• Very sensitive & linear down to a few cells without the need for carrier RNA
• Isolate from a wide variety of specimens
• Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services
• Available in a variety of formats to suit your needs
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits are suitable for the isolation of total RNA from a range of samples including cells, bacteria, yeast, virus and bodily fluids including plasma/serum, blood, saliva, CSF and more. Extract high quality and purity RNA with excellent RIN values and A₂₆₀/A₂₈₀ suitable for downstream applications including qRT-PCR, RT-PCR, microarrays, NGS and more. These kits purify all sizes of RNA from large mRNA, lncRNA down to microRNA (miRNA) in the same fraction without the requirement of phenol. Isolate all RNA sequences at an equal rate irrespective of size. Moreover, when the RNA sequences are small (e.g. miRNA), the column binds small RNAs regardless of their GC content.

Total RNA Purification 96-Well Kit (High Throughput and High Throughput Deep Well)

This 96-well kit provides a rapid method for the high-throughput isolation and purification of total RNA in 30 minutes using vacuum manifold, plate centrifuge, or liquid handlers with vacuum capabilities. Total RNA can be isolated from a broad range of sample sources including cultured cells, tissues, blood, serum, plasma, bacteria, yeast, fungi, and viruses.

Isolate RNA after Purifying EVs and Exosomes

Ultracentrifugation, Exoquick, Filtration

Cat. #	Name	Elution Volume	Plasma/Serum	Urine	Cell-Culture Media
55000	Plasma/Serum RNA Purification Mini Kit	10 – 25 µL	50 µL – 1 mL	250 µL – 1 mL	5 – 10 mL
35300	Total RNA Purification Micro Kit	20 – 50 µL	1 – 4 mL	2 – 10 mL	10 – 20 mL
17200	Total RNA Purification Kit	50 – 100 µL	4 – 10 mL	11 – 30 mL	20 – 35 mL

Details

Supporting Data

Figure 1 / 13

Previous

Next

Click for expanded view

Kit Specifications
Maximum Binding Capacity Per Well	50 μg
Maximum Loading Volume Per Well	500 μL
Size of RNA Purified	All sizes, including small RNA (< 200 nt)
Maximum Amount of Starting Material:
Animal Cells	1 x 106 cells
Animal Tissues	10 mg
Blood	100 μL
Plasma/Serum	150 μL
Bacteria	1 x 109 cells
Yeast	1 x 108 cells
Fungi	40 mg
Plant Tissues	40 mg
Time to Complete 96 Purifications	30 minutes
Average Yields*
HeLa Cells (1 x 106 cells)	15 μg
E. coli (1 x 109 cells)	50 μg

* average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.

Component	Cat. 17200 (50 preps)	Cat. 37500 (100 preps)	Cat. 17250 (250 preps)	Cat. 17270 (500 preps)	Cat. 24300 (192 preps)	Cat. 24370 (576 preps)	Cat. 24350 (192 preps)	Cat. 24380 (576 preps)
Buffer RL	40 mL	2 x 40 mL	175 mL	350 mL	2 x 40 mL	350 mL	2 x 40 mL	350 mL
Wash Solution A	38 mL	2 x 38 mL	148 mL	1 x 148 mL 1 x 74 mL	2 x 38 mL	1 x 74 mL 1 x 148 mL	2 x 38 mL	1 x 74 mL 1 x 148 mL
Elution Solution A	6 mL	2 x 6 mL	30 mL	60 mL	2 x 20 mL	60 mL	2 x 20 mL	60 mL
Mini Spin Columns	50	100	250	500	–	–	–	–
96-Well Isolation Plate	–	–	–	–	2	6	–	–
96-Well Isolation Plate (Deep Well)	–	–	–	–	–	–	2	6
Adhesive Tape	–	–	–	–	4	12	4	12
Collection Tubes	50	100	250	500	–	–
96-Well Collection Plate	–	–	–	–	2	6	–	–
96-Well Collection Plate (Deep Well)	–	–	–	–	–	–	2	6
Elution Tubes (1.7 mL)	50	100	250	500	–	–
96-Well Elution Plate	–	–	–	–	2	6	–	–
96-Well Elution Plate (Deep Well)	–	–	–	–	–	–	2	6
Product Insert	1	1	1	1	1	1	1	1

K-AMYLSD

SKU: 700004263

160 assays (manual) / 640 assays (auto-analyser)

Introduction

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

1. The sample is highly infectious, posing great harm to operators and the environment.

2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;

3. Blood sample contains a large amount of impurities and inhibitory factors.

Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.

The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from whole blood, tissue and culture cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 10ml blood and 1g tissue using Maxi column
Applications	PCR, southern bolt and virus detection, etc
Purification method	Maxi spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
Sample amount	3-10ml
Elution volume	≥700μl
Time per run	≤90 minutes
Liquid carrying volume per column	4ml
Binding yield of column	5mg

Principle

This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• Fast – without separation of leukocytes, organic extraction or ethanol precipitation
• Simple – all nucleic acids can be obtained by direct digestion
• Pertinence – specially designed for isolating DNA from 3-10ml blood and related body fluids
• Wide applicability – handle a variety of liquid samples
• Economy – excellent cost effectiveness performance

Kit Contents

Contents	D311502	D311503
Purification Times	10	50
HiPure gDNA Maxi Columns	10	50
50ml Collection Tubes	20	100
Buffer ATL	120 ml	550 ml
Buffer AL	120 ml	2 x 300 ml
Buffer GW1*	53 ml	220 ml
Buffer GW2*	25 ml	110 ml
RNase A	40 mg	180 ml
Proteinase K	120 mg	540 mg
Protease Dissolve Buffer	12 ml	50 ml
Buffer AE	30 ml	120 ml

Storage and Stability

Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Purchase Guide

Name	CAT NO	Sample amount	Leukocyte protocol*	Colum type	Elutio volume	Average yield	Time per run
HiPure Blood DNA Mini Kit	D3111	10-200μl	1ml	2ml column	≥20μl	5-9μg/200μl	≤30 minutes
HiPure Tissue&Blood DNA Midi Kit	D3113	0.2-2ml	10ml	1.5ml column	≥300μl	20-40μg/1m	≤80 minutes
HiPure Tissue&Blood DNA Maxi Kit	D3115	3 -10ml	10ml	15ml column	≥700μl	20-40μg/1m	≤90 minutes
HiPure Tissue&Blood DNA 96 Kit	D3117	1-200μl	1ml	96 well plate		3-8μg/200μl

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples: