Overview

Peelable heat sealing film which is made using gas permeable grid lacquer paper. This seal is suitable for insect studies and seed storage.

• Heat sealing is a quick and cost effective method of plate sealing
• Our Gas PermASeal II Heat Seal is a paper with a grid lacquer coating which is porous and gas permeable
• The Gas PermeASeal II Heat Seal is compatible with polypropylene, polyethylene, polystyrene and cyclic olefin copolymer (COC) plates
• The seal can be removed by peeling, or it can be pierced with a pipette tip manually or using a liquid handling robot
• The Seal has a temperature range from -20°C to 80°C
• It can be used for insect and seed storage, as it enables gas exchange, whilst providing an inert surface with no adhesive to interfere with the well contents
• This seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
• Also available in roll format compatible with specified automated heat sealers, such as our Wasp or Chameleon XT

Peelable heat sealing film which is made using gas permeable grid lacquer paper. This seal is suitable for insect studies and seed storage.

The Opentrons Flex HEPA/UV Module enables you to run sensitive contamination-prone applications. It removes 99.99% of 0.3 μm DNA-containing particulates and biological contaminants like bacteria, fungi, and other microorganisms from the air, creating a clean work environment inside the Opentrons Flex.

The Opentrons Flex HEPA/UV Module enables you to run sensitive contamination-prone applications. It removes 99.99% of 0.3 μm DNA-containing particulates and biological contaminants like bacteria, fungi, and other microorganisms from the air, creating a clean work environment inside the Opentrons Flex.

Introduction

HiPure RNA Clean Up Kit provides a rapid and easy method for the purification and concentrate RNA from enzymatic reactions or for desalting the RNA samples. RNA purified using HiPure RNA Clean Up Kit is ready for all downstream applications such as RT-PCR, Northern blotting, mRNA purification, nuclease protection, and in vitro translation.

Details

Specifications

Principle

The HiPure system uses a simple bind-wash-elute procedure. Binding buffer is added directly to the sample or other enzymatic reaction, and the mixture is applied to the column. Nucleic acids adsorb to the silica membrane in the high-salt conditions provided by the buffer. Impurities are washed away and pure RNA is eluted with a small volume of low-salt buffer provided or water, ready to use in all subsequent applications.

Advantages

• High recovery – recovery of RNA up to 90%
• Low elution volume – the elution volume can be as low as 15µl
• Fast – only 10 minutes for recovery by using column method
• General – suitable for various crude RNA products
• Wide range of fragment recovery:(>25nt RNA)

Kit Contents

Storage and Stability

The Kit can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

HiPure RNA Clean Up Kit provides a rapid and easy method for the purification and concentrate RNA from enzymatic reactions or for desalting the RNA samples. RNA purified using HiPure RNA Clean Up Kit is ready for all downstream applications such as RT-PCR, Northern blotting, mRNA purification, nuclease protection, and in vitro translation.