X96 Dual Ring Magnetic Plate 96-well with Integrated Cushion Base
Facebook
X
Pinterest
Email
Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL (from PCR plates), larger outer magnet handles up to 2 mL deep well assays
Detail
Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL (from PCR plates), larger outer magnet handles up to 2 mL deep well assays
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable differences
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
For the selective isolation and culture of Listeria monocytogenes.
Principle and Interpretation
Peptone provides the carbon and nitrogen sources necessary for growth; yeast extract powder and starch provide carbon and nitrogen sources, vitamins and growth factors; sodium chloride can maintain a balanced osmotic pressure; glucose provides a carbon source; Listeria hydrolyzes esculin and reacts with iron ions to form black 6,7-dihydroxycoumarin; mannitol is a fermentable sugar, and phenol red is a pH indicator; lithium chloride and other antibiotics can inhibit Gram-negative bacteria and most Gram-positive bacteria; agar is the coagulant of the culture medium.
Formulation
Ingredients
/liter
Peptone
23 g
Starch
1 g
NaCl
5 g
Columbia agar
13 g
Mannitol
10 g
Ferric ammonium citrate
0.5 g
Esculin (aesculin)
0.8 g
Dextrose (glucose)
0.5 g
Lithium chloride
15.0 g
Phenol red
0.08 g
pH7.2±0.2 at 25°C
Preparation
Weigh 68.9g of dry powder of this product, add 1L of distilled water or deionized water, stir, heat and boil until completely dissolved, divide into Erlenmeyer bottles, sterilize at 121℃ for 15min, cool to room temperature and set aside. Heat to dissolve agar before use, cool to 50℃, add 1 tube of supporting reagent (SR0140) per 100mL of basal culture medium, shake well and pour into sterilized culture dish.
Quality Control
The following quality control strains were inoculated and cultured at 35-37℃ for 24h. The results are as follows:
Quality control strains
Growth
Listeria monocytogenes ATCC19115
Gray-green colonies with a black depression in the center and black surrounding
Enterococcus faecalis ATCC29212
–
Escherichia coli ATCC25922
–
Storage and Shelf Life
2-30℃，Keep container tightly closed, avoid direct sunlight.
Use before expiry date on the label.
Precautions
1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort
2. Keep container tightly closed after using to prevent clumping.
Waste Disposal
Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.
Document
Intended Use For the selective isolation and culture of Listeria monocytogenes. Principle and Interpretation Peptone provides the carbon and nitrogen sources necessary for growth; yeast ex……
0.2 mL PCR Strip / 1.5 mL Microcentrifuge Tube Separator
Product Info
Document
Product Info
Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes
Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet on both sides to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic bead
Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes
Sulfo DBCO-TFP Ester is a water-soluble, amine-reactive labeling reagent that enables simple and efficient incorporation of Sulfo DBCO moiety onto amine-containing molecules. The hydrophilic, sulfonated spacer arm greatly improves water solubility of DBCO derivatized molecules, in many cases making them completely soluble in aqueous media. A short spacer arm adds minimal mass to modified molecules.
Document
Sulfo DBCO-TFP Ester is a water-soluble, amine-reactive labeling reagent that enables simple and efficient incorporation of Sulfo DBCO moiety onto amine-containing molecules. The hydrophilic, sulfonated spacer arm greatly improves water solubility of DBCO derivatized molecules, in many cases making them completely soluble in aqueous media. A short spacer arm adds minimal mass to modified molecules.
