The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with our MSP750 MSP750R MSPU650R or MSPU650 magnet plates and is available as a discounted kit
Detail
96-Well 0.2 mL PCR Strip Rack SBS/ SLAS Footprint
SKU: MTP96
The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with our MSP750 MSP750RMSPU650R or MSPU650 magnet plates and is available as a discounted kit
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
D-Lactic Acid
Assay Format:
Spectrophotometer, Microplate, Auto-analyser
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Increase
Linear Range:
0.5 to 30 μg of D-lactic acid per assay
Limit of Detection:
0.21 mg/L
Reaction Time (min):
~ 5 min
Application examples:
Wine, soft drinks, milk, dairy products (e.g. cream, milk / whey powder, cheese, condensed milk and yogurt), foods containing milk (e.g. dietetic foods, bakery products, baby food, chocolate, sweets and ice-cream), vinegar, fruit and vegetables, processed fruit and vegetables, meat products, food additives, paper (and cardboard), cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.).
Method recognition:
Methods based on this principle have been accepted by DIN, GOST, IDF, EEC, EN, ISO, OIV, IFU, AIJN and MEBAK
The D-Lactic Acid (D-Lactate) (Rapid) test kit is suitable for the rapid, specific measurement and analysis of D-lactic acid in wine, beer, juice, milk, cheese, vinegar, meat and other food products.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
Extended cofactors stability. Dissolved cofactors stable for > 1 year at 4oC.
Very rapid reaction with most samples (~ 5 min)
Very competitive price (cost per test)
All reagents stable for > 2 years after preparation
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Suitable for manual, microplate and auto-analyser formats
Document
The D-Lactic Acid (D-Lactate) (Rapid) test kit is suitable for the rapid, specific measurement and analysis of D-lactic acid in wine, beer, juice, milk, cheese, vinegar, meat and other food products.
Urine DNA Isolation Kit for Exfoliated Cells or Bacteria
Product Info
Document
Product Info
Overview
Isolate genomic DNA from either exfoliated cells or bacteria found in urine
Isolate and detect genomic DNA from as little as 1 mL of urine and up to 50 mL urine
High quality DNA for sensitive applications
Rapid processing time
Norgen’s Urine DNA Isolation Kit for Exfoliated Cells or Bacteria is designed for the rapid isolation of either: 1) human genomic DNA from exfoliated cells that have been shed into the urine from the urinary tract; or 2) bacterial genomic DNA from urine samples. The kit allows for the isolation of DNA from 1 to 50 mL of urine. The genomic DNA isolated from exfoliated cells can be used in a number of diagnostic and research applications including the diagnosis and monitoring of bladder, kidney, or other urinary-tract cancers. Bacterial genomic DNA from both human urine samples and urine samples from animals can be isolated with this kit in order to study the levels and types of bacteria that are present. The kit allows for the isolation of genomic DNA from both Gram negative and Gram positive bacteria, including E. coli, Proteus spp., Klebsiella spp., Enterobacter spp., Serratia spp., Pseudomonas spp, Clostridial ssp. and Leptospirosis spp.Chlamydia trachomatis and Neisseria gonorrhoeae.
Typical yields of human genomic DNA from exfoliated cells will vary depending on the cell density of the urine sample, which is affected by a number of factors including health, diet and sex of the individual donating the urine. Typical yields of bacterial genomic DNA will vary depending on the urine sample and the bacterial species, if any, present in the urine. Healthy humans generally have < 10, 000 CFU of bacteria per mL of urine, and this kit is sufficiently sensitive to isolate and detect DNA from even this minimal amount of bacteria. The genomic DNA purified with this kit is fully digestible with all restriction enzymes tested, and is completely compatible with downstream applications such as PCR, qPCR and Southern Blot analysis.
10 minutes (Plus a 30 minute incubation – Bacteria) (Plus a 15 minute incubation – Exfoliated)
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 2 years after the date of shipment when stored at room temperature.
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
Key Features
User-friendly gel cassette:
Numbered and framed wells for sample loading
With cassette opener for easy use
Enhanced gel performance:
Enhanced band sharpness
Better resolution of small proteins
Stable for shipping at ambient temperature
Easy compatibility:
Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
Compatible with most popular protein electrophoresis systems
Storage and stability
Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.
Do not freeze Q-PAGE™ Precast Gels Remove tape and comb before electrophoresis.
Keep Q-PAGE™ Precast Gels flat during storage.
Document
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.