Introduction

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from tissue and culture cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from <25 mg tissue, culture cells, FTA card
Applications	PCR, southern bolt and virus detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Animal tissue or cultured cells
Sample amount	Animal tissue : <25mg, Cultured cells : <5 x 106
Elution volume	≥30μl
Time per run	30 – 60 minutes
Liquid carrying volume per column	800μl
Binding yield of column	100μg

This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while proteinis not adsorbed and is removed with filtration. After washing proteins andother impurities, Nucleic acid was finally eluted with low-salt buffer (10mmTris, pH9.0, 0.5mm EDTA).

Advantages

• Good repeatability – suitable for extracting high-yield DNA from different types of tissue samples
• High purity – can be used for downstream applications such as multiplex and quantitative PCR
• Fast – simplified process, extracting several samples in 20 minutes (after digestion)
• Safety – no phenol orchloroform extraction, no alcohol precipitation

Kit Contents

Contents	D312102	D312103
Purification Times	50 Preps	250 Preps
Buffer ATL	15 ml	65 ml
Buffer DL	15 ml	65 ml
Buffer GW1	22 ml	110 ml
Buffer GW2	12 ml	50 ml
RNase A	10 mg	50 mg
Proteinase K	24 mg	120 mg
Protease Dissolve Buffer	5 ml	15 ml
Buffer AE	15 ml	60 ml
HiPure gDNA Mini Columns	50	2 x 125
2 ml Collection Tubes	100	5 x 100

Storage and Stability

RNase A and Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Purchase Guide

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from tissue and culture cells.

Overview

• Rapid spin column purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive
• Bead tubes (provided) allow for effective mechanical homogenization
• Purified DNA is of high quality and integrity and compatible with any sensitive downstream applications such as PCR, qPCR, RFLP and more

These kits provide fast and reliable procedures for the purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive. Genomic DNA is efficiently extracted from the cells by a combination of heat treatment, detergents and Bead Tubes (provided). An optional lyticase treatment allows for improved DNA yields with certain fungal and yeast species. Recovered genomic DNA is of excellent yield and purity for any downstream application including PCR, qPCR, Restriction Fragment Length Polymorphism (RFLP), Amplified Fragment Length Polymorphism (AFLP), sequencing, SNP analysis and more.

Fungi/Yeast Genomic DNA Isolation Kit (Spin Column)

This kit provides rapid spin column purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive. Preparation time for a single sample is less then 30 minutes, and each kit contains sufficient materials for 50 preparations.

Fungi/Yeast Genomic DNA Isolation 96-Well Kit (HT)

Norgen’s Fungi/Yeast Genomic DNA Isolation 96-Well Kit provides a fast, reliable and simple procedure for high throughput isolation of DNA from viable yeast cells, fungal spores or mycelium and Gram-positive bacteria. The purification could be performed on either a vacuum manifold or using centrifugation. Complete 96 purifications in 40 minutes.

Details

Supporting Data

Figure 1 / 6

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	50 μg
Maximum Column Loading Volume	650 μL
Maximum Amount of Starting Material: Fungi (wet weight) Yeast or Bacteria Culture	50 mg 0.5mL – 1mL
Average Yield* Pichia sp. (yeast) Botrytis cinerea ​Fusarium sp. Aspergillis niger Mucor racemosus Cladosporium cladosporioides Penicillium sp. Rhizopus oryzae Alternaria tenuissima	25 μg 32 μg 42 μg 26 μg 15 μg 12 μg 40 μg 7 μg 30 μg
Time to Complete 10 purifications	30 minutes

* Yield will vary depending on the type of sample processed

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.

Component	Cat. 27300 (50 preps)	Cat. 27350 (192 preps)
Lysis Buffer L	30 mL	2 x 60 mL
Resuspension Solution A	20 mL	60 mL
Solution BX	28 mL	2 x 28 mL
Wash Solution A	18 mL	2 x 38 mL
Elution Buffer B	15 mL	30 mL
Bead Tubes	50	200
Spin Columns	50	–
Collection Tubes	50	–
96-Well Plate	–	2
96-Well Collection Plate	–	2
Adhesive Tape	–	4
Elution Tubes (1.7 mL)	50	–
96-Well Elution Plate	–	2
Product Insert	1	1

DBCO-Acid is a non-activated building block and adds minimal spacer to modified molecules. In the presence of activators such as EDC or HATU, this reagent can be used to derivatize amine-containing molecules through a stable amide bond. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

DBCO-Acid is a non-activated building block and adds minimal spacer to modified molecules. In the presence of activators such as EDC or HATU, this reagent can be used to derivatize amine-containing molecules through a stable amide bond. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.