Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
L-Malic Acid
Assay Format:
Spectrophotometer, Microplate
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Increase
Linear Range:
0.5 to 30 µg of L-malic acid per assay
Limit of Detection:
0.25 mg/L
Reaction Time (min):
~ 3 min
Application examples:
Wine, beer, fruit juices, soft drinks, candies, fruit and vegetables, bread, cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.).
Method recognition:
Methods based on this principle have been accepted by AOAC, EEC, EN, NF, NEN, DIN, GOST, OIV, IFU, AIJN, NBN, ISO and MEBAK
The K-LMAL-58A pack size has been discontinued (read more)
L-Malic Acid (Regular) Assay Kit, for the specific assay of L-malic acid (L-malate) in beverages and food products.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
Need other assay kits? View our full list of organic acid assay kits.
Advantages
PVP incorporated to prevent tannin inhibition
Both enzymes supplied as stable suspensions
Very competitive price (cost per test)
All reagents stable for > 2 years after preparation
Very rapid reaction (~ 3 min)
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Extended cofactors stability
Suitable for manual and microplate format
Other Products
Internal Lane Standard (60bp – 600bp, ROX) for ABI Genetic Analyzer
Product Info
Document
Product Info
Overview
Ready-to-use
Highly stable
Precise
22 discrete bands from 60 bp to 600 bp
High quality ready-to-use double-stranded DNA ladder derived by recombinant technology for precise size and mass determination in various fluorescence-detection instruments including different models of Applied Biosystems® PRISM® and Genetic Analyzers
22 discrete bands, ranging from 60 bp to 600 bp
The ladder is asymmetrically labelled with ROX that can be detected by excitation at 576 nm and fluorescent emission at 597 nm
Compatible with products for fragment analysis including Promega PowerPlex® 16 System
>The display can simultaneously display:all main parameters such as cold trap temperature,vacuum degree,sample temperature, and shelf temperature.
>Schematic diagram of equipment operating components,through graphic display to view the working status of each component of the equipment.
>Ithas the functions of cold trap precooling and vacuum pump preheating,and the time can be set by the userin the system. >Display whether the current running status is normal or not by numerical color.
o One-key operation,the operation is extremely simple,no special professional learning and training is required.
o Thermal electromagnetic over-current and short-circuit protection,making the equipment run more safely and stably.
o Active reminder of equipment maintenance time and vacuum pump replacement lubricating oil time.
o Ambient temperature monitoring,the device automatically reminds the alarm if the ambient temperature is too high.
o Optional eutectic point detection device and endpointjudgment detection system make freeze-drying more scientific.
Dryingchamber
· The separate drying chamber reduces the probability of damage caused byimproper handling of the drying chamber due to height and weight.The upper cover is anodized aluminum with anti-corrosion treatment.●Highly transparent plexiglass drying chamber,good light and heat radiation conduction.Reserve 6/12 external valve ports.· 316L stainless steel all black Teflon coating drying chamber,suitable for drying organic solvents and various corrosive samples,reserved for 6/12 external ports.· 316L stainless steel vertical multi-port multi-manifold external rack(The standard configuration is aplexiglass drying chamber,and one ofthe diying chambers can be optional)
Coldtrapandcondensingcoil
· The cold trap cavity and condensation coil are made of 316L stainless steel.Large opening and channel design,the gas can be quickly captured through the condensing coil.· The cavity and condensing coil are equipped with Teflon anti corrosion coating as standard,which can trap organic solvents and various corrosive solvents.· The condensing coil is placed in the cold trap to increase the condensate catchment area,which can effectively prevent external condensation.
Sampleshelves
· 316Lstainless steel stackable sample shelves,capable oflyophilizing machine solvents and various corrosive solvents.Each shelf can be placed and taken freely without manual work.The distance and height ofeach shelfcan be adjusted freely.-All black coating,good heat absorption performance.-Special hole for freeze-drying of centrifuge tubes,which is conducive to the drying of samples in centrifugetube containers.· All-aluminum Teflon surface anti-corrosion treatment electric heating shelf.
Refrigerationsystem
· Danffos compressorCopper plate heat exchanger,the largest area to increase heat dissipation· Unique refrigeration technology,the temperature of the cold trap can be lowered from ambient temperatureto below-80C°within 2 minutes.· Class A temperature sensor with high temperature accuracy and low error.· Multiple detection and alarm system,the refrigeration system pressure is too high or refrigeration failure cantimely alarm and take corresponding measures.
Techinical parameter
ItemNo
ST7003
ST7006
ST9006
Ice condenser capacity
3kg
6kg
6kg
Ice condenser temperature
-70℃
-70℃
-90℃
Cold trap volume
5L
10L
10L
Freeze dried chamber
Bell shape (standard configuration)/Multi manifold type/T-shaped frame type
Sample shelf
φ200mm.Single layer area 0.03m2 with 3-5 layers available
●260mm/485mm.Single layer area 0.055m²/0.185m².3-10 layers/optional ● Electric heating/manual capping/optiona
Vacuum pump
Extreme vacuum 5*10*mbar with a pumping capacity of 8m³/h optional pump of various types
Oil mist filte
Standard configuration
Vacuum pump connection pipe
Single forming stainless steel flexible pipe DN16 ISO-KF L-1.2m
Anti-corrosive treatment
Cold trap,condensing coil/all equipped with PTFE anti-corrosion treatment as standard. Freeze-drying organic solvents.
External valve
6pieces/optional
1-48 pieces/optional
Eutectic point detection system
Support/Optional
Data output analysis
Support/Optional
Powe
0.6kw
1.1kw
1.5kw
Size
420*545*455mm
510*570*500mm
Document
Freezer Dryer, 3kgs-6kgs water capturer Model: ST7003,ST7006,ST9006
96-Well Low Elution Ring Magnetic Plate with Integrated Cushion Base
Product Info
Document
Product Info
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
