IST-132 QuickSeal Gas Perm WovenTM Self Adhesive Sealing Film

Techinical parameter

Item   No	SF7009	SF9009	SF7012	SF9012
Ice condenser capacity	9kg		12kg
Ice condenser temperature	-70  C°	90℃	-70  C°	-90℃
Cold trap volume	15L		20L
Freeze dried chamber	High permeability organic glass/multi manifold external valve/stainless steel chamber
Sample shelf	●φ260mm/485mm.Single layer area 0.055m²/0.185m².3-10 layers/optional ● Electric heating/manual capping/optional
Vacuum pump	Extreme vacuum 5*10*mbar with a pumping capacity of 8m³/h optional pump of various types
Oil mist filter	Standard configuration
Vacuum pump connection pipe	Single forming stainless steel flexible pipe DN16 ISO-KF L-1.2m
Anti-corrosive treatment	Cold trap,condensing coil/all equipped with PTFE anti-corrosion treatment as standard. Freeze-drying organic solvents
External valve	1-48 ports/optiona
Eutectic point judgment	Support/Optional
Data export analysis	Support/Optional
Power	0.9kw	1.5kw	1kw	1.6KW
Size	525*570*1080mm

Model:
SF7009,SF9009,SF7012,SF9012

Brand:
Yingtai

The Opentrons Deep Well Aluminum Block can be placed directly on the OT-2/Opentrons Flex deck or on the Opentrons Temperature Module. This block can hold flat bottom plates and other flat labware at constant temperature. The aluminum block holds temperatures between 4°C and 95°C when used with the Opentrons Temperature Module (GEN2).

The Opentrons Deep Well Aluminum Block can be placed directly on the OT-2/Opentrons Flex deck or on the Opentrons Temperature Module. This block can hold flat bottom plates and other flat labware at constant temperature. The aluminum block holds temperatures between 4°C and 95°C when used with the Opentrons Temperature Module (GEN2).

What is Collagen?

Collagen is a fundamental component of the extracellular matrix, and the predominant protein in animals, constituting around 30% of total protein mass. A glycoprotein, it is well known for its triple helical structure. This is formed from three polypeptide α-chains with Gly-X-Y repeating residues (Gly for Glycine, X for proline, and Y for hydroxyproline).

‍Types of Collagen

Over 28 types of collagens have been identified, with Type I collagen being the most abundant. It’s prevalent in ligaments, tendons, skin, and bone tissue. Its mature, insoluble form grants it remarkable strength, making it vital for the mobility of organisms. Collagen also has biochemical functions, influencing cell growth, proliferation, and differentiation.

This version of the kit is designed to detect and measure  SOLUBLE forms of collagen. Chose the Sircol Insoluble collagen kit if you need to analyse INSOLUBLE collagen.

Applications of Collagen

Collagen, with its diverse properties, finds utility in various industries. It plays a role in medicine for wound healing and has an expanding role in tissue engineering and cell culture for biomedical purposes. It’s gaining popularity in the cosmetic industry for skin rejuvenation and is used in chemical formulations and the food industry as a functional food supplement and additive.

How does Sircol 2.0 detect collagen?

The Sircol 2.0 dye reagent includes Sirius Red, a linear anionic dye with sulfonic acid side chains. This reagent is specially formulated to bind to the Gly-X-Yn helical structure of soluble collagen under assay conditions.

*The improved formulation of Sircol 2.0 dye enables a greater degree of dye-collagen specificity (compared to our previous S1000 assay kit).

‍Overview of the Sircol 2.0 assay process:

Step 1. Prepared samples are placed in the wells of the assay microplate, together with Sircol Dye Reagent. After 30 minutes mixing, any collagen-dye complexes will form as a precipitate. These are collected on the base of the microplate wells by centrifugation.

Step 2. Unbound dye is removed by gentle aspiration, followed by a rinse with Plate Wash Reagent.

Step 3. Following further centrifugation, collagen-bound dye is eluted by incubation with a Dye Release Reagent. Eluted dye is detected ‘in-situ’ by spectrophotometric analysis of the microplate at 556nm.

Step 4. The collagen content of unknown samples can be quantified by comparison against a calibration curve, prepared using the Collagen Reference Standard supplied with the kit.

A list of suggested sample types can be found under the ‘Assay Specification‘ tab.

Assay range

2 – 200µg/ml or 0.25 – 20µg/ml (using optional Collagen Concentration Protocol)

Limit of Detection

2 µg/ml

Detection Method

Colorimetric Detection (556nm) (Endpoint), Requires a microplate centrifuge.

Measurements per kit

96 in total (allows a maximum of 41 samples to be run in duplicate alongside a standard curve).

Suitable Samples

Soluble* collagens from mammalian**:

In-vivo: Tissues, cartilages and fluids.

‍In-vitro: Extracellular matrices / Conditioned media from 2D/3D culture environments.

The straightforward sample processing and analysis of Sirco 2.0 make it a good alternative to conventional hydroxyproline analysis.

‍*Prior salt/acid/acid-pepsin extraction may be necessary to release soluble collagen.

**Sircol 2.0 is primarily designed for use with in-vivo / in-vitro samples of mammalian origin. Collagens originating from other taxonomic groups and kingdoms can also be analysed. See note on p6 of manual for further information.‍

Precautions

This kit is designed for research use only. Not for use in diagnostic procedures.
Kit requires access to a microplate centrifuge* (see note below), as well as a spectrophotometer/colorimeter capable of absorbance detection at 556nm.
Specific sample preparation protocols may require customer to provide further reagents, consult assay manual for further information.

‍

*As a minimum, we recommend that the centrifuge can centrifuge a 96-well microplate at 400 x g for 120 minutes. Higher speed centrifuges are recommended (up to a maximum of 2000 x g), allowing a reduction in centrifuge time.

Sircol 2.0 kit contents:

1. Dye Reagent (1x20ml)

2. Collagen Reference Standard (1x5ml, 200µg/ml of soluble Bovine collagen)

3. Plate Wash Reagent (1x28ml)

4. Collagen Concentration Reagent (1x25ml)

5. Neutralisation Reagent (1x8ml)

6. Dye Release Reagent (1x25ml)

7. Assay Microplate (1×96-wells)

8. Microplate Seals (6x)

9. Documentation (QuickStart Guide / Manual / Certificate of Analysis)

NB: Additional reagents may be required for sample preparation prior to assay. Consult manual or contact us for further details. This kit requires the use of a microplate centrifuge, capable of centrifuging a 96-well microplate at 400 x g for 120 minutes. Higher speed centrifuges are recommended (up to a maximum of 2000 x g), allowing a reduction in centrifuge time.

Experience user-friendly detection & measurement of Soluble Collagen with Sircol™ 2.0! Our latest kit simplifies collagen quantification within in-vivo / in-vitro samples. Sircol 2.0 offers enhanced sensitivity and accuracy compared to our previous Sircol kit.