Acanthocheilonema viteae – IgG ELISA

Introduction

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.

Details

Specifications

Adsorption Mechanism

Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silicagel membrane, while other pollutants, mainly proteins, are removed by membrane washing.

Ordering information

Purchase Guide

Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

Introduction

Intended Use

For the selective isolation and culture of Listeria monocytogenes.

Principle and Interpretation

Peptone provides the carbon and nitrogen sources necessary for growth; yeast extract powder and starch provide carbon and nitrogen sources, vitamins and growth factors; sodium chloride can maintain a balanced osmotic pressure; glucose provides a carbon source; Listeria hydrolyzes esculin and reacts with iron ions to form black 6,7-dihydroxycoumarin; mannitol is a fermentable sugar, and phenol red is a pH indicator; lithium chloride and other antibiotics can inhibit Gram-negative bacteria and most Gram-positive bacteria; agar is the coagulant of the culture medium.

Formulation

Preparation

Weigh 68.9g of dry powder of this product, add 1L of distilled water or deionized water, stir, heat and boil until completely dissolved, divide into Erlenmeyer bottles, sterilize at 121℃ for 15min, cool to room temperature and set aside. Heat to dissolve agar before use, cool to 50℃, add 1 tube of supporting reagent (SR0140) per 100mL of basal culture medium, shake well and pour into sterilized culture dish.

Quality Control

The following quality control strains were inoculated and cultured at 35-37℃ for 24h. The results are as follows:

Storage and Shelf Life

2-30℃，Keep container tightly closed, avoid direct sunlight.

Use before expiry date on the label.

 Precautions

1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort

2. Keep container tightly closed after using to prevent clumping.

Waste Disposal

Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.

Intended Use For the selective isolation and culture of Listeria monocytogenes. Principle and Interpretation Peptone provides the carbon and nitrogen sources necessary for growth; yeast ex……

Overview

Non-woven gas permeable seal that limits evaporation. The seal is peelable, pierceable; suitable for cell culture and seed & insect storage too.

• Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective
• Our Gas PermASeal Heat Seal is made from a non-woven material and is designed for use in cell culture, due to its porous nature
• The seal is compatible with polypropylene and polystyrene
• It can be removed by peeling, or it can be pierced with a pipette tip manually, using a liquid handling robot.
• Gas PermASeal Heat Seal can be utilized for effective overnight incubations, during which it demonstrates significant reductions in evaporation compared to lids
• It can also be used for insect and seed storage as it enables gas exchange, whilst providing an inert surface with no adhesive to interfere with the well contents
• This seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
• Also available in multiple roll formats compatible with specified automated heat sealers, such as our Wasp or Chameleon XT

Non-woven gas permeable seal that limits evaporation. The seal is peelable, pierceable; suitable for cell culture and seed & insect storage too.