Introduction

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

1. The sample is highly infectious, posing great harm to operators and the environment.

2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;

3. Blood sample contains a large amount of impurities and inhibitory factors.

Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.

The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from tissue, whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from blood, tissue, culture cells, swab, blood spots using 96 plate
Applications	PCR, southern bolt and virus detection, etc
Purification method	96 well plate
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Blood, serum, plasma, milk, saliva, and other liquid samples and cultured cells
Sample amount
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column

Principle

This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• High throughput – 96 samples can be processed simultaneously

Kit Contents

Contents	D311701	D311702
Purification Times	1 x 96	4 x 96
HiPure gDNA Plate	1	4
96 well Plate (2.2ml)	1	4
1.6ml Collection Plate	1	4
0.5ml Collection Plate	1	4
Silicon Seal Tape	1	4
Seal Film	5	25
Buffer ATL	30 ml	100 ml
Buffer AL	30 ml	100 ml
Buffer DW1	60 ml	250 ml
Buffer GW2	50 ml	2 x 100 ml
Proteinase K	50 ml	200 ml
Protease Dissolve Buffer	5 ml	15 ml
Buffer AE	30 ml	120 ml

Storage and Stability

Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Purchase Guide

Name	CAT NO	Sample amount	Leukocyte protocol*	Colum type	Elutio volume	Average yield	Time per run
HiPure Blood DNA Mini Kit	D3111	10-200μl	1ml	2ml column	≥20μl	5-9μg/200μl	≤30 minutes
HiPure Tissue&Blood DNA Midi Kit	D3113	0.2-2ml	10ml	1.5ml column	≥300μl	20-40μg/1m	≤80 minutes
HiPure Tissue&Blood DNA Maxi Kit	D3115	3 -10ml	10ml	15ml column	≥700μl	20-40μg/1m	≤90 minutes
HiPure Tissue&Blood DNA 96 Kit	D3117	1-200μl	1ml	96 well plate		3-8μg/200μl

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

Introduction

This product is suitable for rapid extraction of DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 1-100ul blood, FFPE, tissue and other samples
Applications	Second generation sequencing, PCR, real timePCR, etc.
Purification method	Monodisperse magnetic beads
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Anticoagulant blood, concentrated blood, buffy coat, lymphocytes and cultured cells
Sample amount	Body fluid : 10 – 200μl, Tissue : ≤10mg
Yield	10ng – 15μg
Elution volume	80 -100μl
Time per run

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

• High binding force – suitable for handling DNA rich samples, such as whole blood, buffy coat, concentrated blood, etc.
• High purity – carboxyl magnetic beads with weak surface adsorption, getting higher purity
• General – can be used for various clinical samples

Kit Contents

Contents	IVD3101
Purification Times	200
MagBind Particles	4.5 ml
Proteinase K	90 mg
Protease Dissolve Buffer	10 ml
Buffer ATL	60 ml
Buffer AL	60 ml
Buffer BD*	20 ml
Buffer BXW1*	110 ml
Elution Buffer	30 ml

Storage and Stability

Proteinase K, MagBind Particles should be stored at 2–8°C upon arrival. However, short-termstorage (up to 18 weeks) at room temperature (15–25°C) does not affect their performance. The remainingkit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions.

This product is suitable for rapid extraction of DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Product Description

Lyophilized Diagnostic Test Kit – Convenient Accurate And -20°C Ready

Product Detail

Kit Storage and term of Validity

Storage term: stored at ≤-20℃,keep away from light, avoid heavy weight and repeated freezing and thawing.

Term of Validity: 14 months

Isothermal nucleic acid Principle Summary

This kit is based on a rapid nucleic acid amplification technology at room temperature and constant temperature: at room temperature and constant temperature (generally 39 ºC~42 ºC), reverse transcriptase uses specific primers and template RNA to synthesize cDNA strands, and binds the auxiliary protein and single strand With the help of the protein, the recombinase and the primer form a complex; perform a homology search and bind the target homology domain, at this time a D-loop region is formed at the homology position and strand exchange begins; accompanied by the recombinase from the complex Upon dissociation, the polymerase also binds to the 3′ end of the primer, initiating chain extension. Relying on the action of nfo enzyme, adding specific molecular probes designed according to the template, and using colloidal gold technology (sandwich method) can detect the final result.

Isothermal nucleic acid Product Features

1/ High sensitivity and specificity, short reaction time.

2/ The reagent form is freeze-dried, stable and easy to operate.

3/ The reaction can be operated by metal bath and water bath pot without purchasing expensive PCR apparatus.

Technical Parameters:

Parameters	Details
Product Name	RNA Isothermal Amplification Kit NFO
Manufacturer	Amp-future
Storage Temperature	-20°C
Kit Components	Enzymes, Buffers ,Reagents
Packaging	48 Tests/box
Detection Limit	500-1000copies/µL
Shipping	ICE
Test Time	5-20mins

Isothermal nucleic acid Applications

Suitable for RNA isothermal rapid amplification kit(NFO type)

Primer: Require pair of nucleotide primers with the length of 25-35 bp.

RNA NFO kit reaction temperature is 39 to 42℃ and time is 5-20 minutes.

Notes

1/ Please avoid nucleic acid contamination and set blank control during reaction due to the high sensitivity of the kit.

2/ Please take out the required quantity of MIRA reaction units for the experiment, and put the rest under storage conditions when performing the experiment.