K-BGLU
SKU: 700004269
100 assays per kit
| Content: | 100 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | β-Glucan |
| Assay Format: | Spectrophotometer |
| Detection Method: | Absorbance |
| Wavelength (nm): | 510 |
| Signal Response: | Increase |
| Linear Range: | 4 to 100 μg of D-glucose per assay |
| Limit of Detection: | 0.5 g/100 g |
| Total Assay Time: | ~ 100 min |
| Application examples: | Oats, barley, malt, wort, beer, food and other materials. |
| Method recognition: | AACC Method 32-23.01, AOAC Method 995.16, AOAC Method 992.28, CODEX Method Type II, EBC Method 3.10.1, ICC Standard No. 166 and RACI Standard Method |
The Beta-Glucan test kit is suitable for the measurement and analysis of Beta-Glucan (Mixed Linkage).
For the measurement of 1,3:1,4-β-D-glucan in cereal grains, milling fractions, wort, beer and other food products.
See our complete range of polysaccharide assay kits.
Advantages
The Beta-Glucan test kit is suitable for the measurement and analysis of Beta-Glucan (Mixed Linkage).
Norgen’s Stool Nucleic Acid Collection and Preservation System is a complete system designed for collection, ambient storage and transport of nucleic acids from stool specimens. Each of the 50 clamshells contain: nitrile gloves, alcohol swabs, Fe-Col® Collection Paper, and Norgen’s Stool Nucleic Acid Collection and Preservation Tube containing Norgen’s Stool Preservative in a liquid format. The user simply collects the stool specimen using the provided Fe-Col® Collection Paper, and then transfers the stool into the Stool Nucleic Acid Collection and Preservation Tube using the spoon attached to the lid. The sample is then mixed gently until the stool is well submerged under the preservative. The Stool Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Stool Preservative allow samples to be stored at room temperature for over 2 years for DNA and up to 7 days for RNA. To extend the stool RNA stability in the preservative, storage at -20°C or -70°C is recommended upon arrival at the testing facilities until RNA purification. The Stool Preservative also prevents the growth of Gram-negative and Gram-positive bacteria and fungi, and inactivates viruses allowing the resulting non-infectious samples to be handled and shipped safely.
Free Download
Tips and tricks for isolating high yield and quality DNA, RNA, miRNA and EV’s from fecal samplesDownload for Free
Figure 1 / 7
Click for expanded view
| Kit Specifications | |
| Stability of Stool Nucleic Acids at Room Temperature | 2 years for DNA Up to 7 days for RNA* |
* The RNA stability will vary depending on the samples
Storage Conditions and Product Stability
All tubes should be kept tightly sealed and stored at room temperature (15 – 25°C) for up to 2 years without any reduction in performance.
| Kit Components | Cat. 63700 |
|---|---|
| Stool Nucleic Acid Collection and Preservation System | 50 |
| Product Insert | 1 |
| Individual Stool Nucleic Acid Collection and Preservation Device Contents | |
| Stool Nucleic Acid Collection and Preservation Tube | 1 |
| Nitrile Gloves | 2 |
| Fe-col® Collection Paper | 1 |
| Alcohol Swabs | 2 |
| Instruction Card | 1 |
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
RLE500R
Maximum – 150 µL
Minimum – 5 µL
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.