A highly efficient, easily automated agarose gel or PCR purification system that delivers superior quality DNA with no salt carryover. Requiring no centrifugation or filtration. The Kit can be easily used in manual and automated 96 or 384-well formats.
Specifications
| Features | Specifications |
| Main Functions | Recover DNA fragments >100bp from agarose gel(<0.3g), purification of DNA from PCR, enzymatic reaction solution or crude gDNA |
| Applications | PCR, NGS, chip analysis, etc. |
| Purification technology | Magnetic beads technology |
| Process method | Manual or automatic |
| Sample type | Agarose Gel, PCR products, enzymatic reaction solution |
| Sample amount | Agarose Gel: <0.3g, PCR products: ≤50µl |
| Recovery | 80% |
| Elution volume | ≥30μl |
| Time per run | ≤30 minutes |
The Kit method contains magnetic particles in an optimized binding buffer to selectively bind DNA fragments (>100bp) and larger to paramagnetic beads. Excess primers, nucleotides, salts, and enzymes can be removed using a simple washing procedure.
Advantages
Kit Contents
| Contents | D500101 | D500102 | D500103 |
| Purification Times | 50 Preps | 500 Preps | 5000 Preps |
| Buffer GDP | 30 ml | 250 ml | 3 x 900 ml |
| MagPure Particles | 1.6 ml | 15 ml | 3 x 50 ml |
| Buffer DW1 | 20 ml | 180 ml | 2 x 800 ml |
| Elution Buffer(10mmTris, pH8.5) | 10 ml | 60 ml | 500 ml |
Storage and Stability
MagPure Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
Experiment Data
A highly efficient, easily automated agarose gel or PCR purification system that delivers superior quality DNA with no salt carryover. Requiring no centrifugation or filtration. The Kit can be easily used in manual and automated 96 or 384-well formats.
K-LMALMQ
60 assays per kit
| Content: | 60 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | L-Malic Acid |
| Assay Format: | Spectrophotometer |
| Detection Method: | Absorbance |
| Wavelength (nm): | 505 |
| Signal Response: | Increase |
| Linear Range: | 0.15 to 15 µg of L-malic acid per assay (i.e. 0.007-0.75 g/L with a 20 µL sample volume) |
| Limit of Detection: | 15.4 mg/L |
| Reaction Time (min): | ~ 6 min |
| Application examples: | Wine, beer, fruit juices, soft drinks, candies, fruit and vegetables, bread, cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Novel method |
This product has been discontinued (read more).
The L-Malic Acid test kit is suitable for the measurement and analysis of L-malic acid in grapes, grape juice and wine using the MegaQuant™ colorimeter (measurement at 505 nm). Suitable for white and red wines at all stages of the winemaking process.
Show all organic acid assay kits.
Advantages
The L-Malic Acid test kit is suitable for the measurement and analysis of L-malic acid in grapes, grape juice and wine using the MegaQuant™ colorimeter (measurement at 505 nm). Suitable for white and red wines at all stages of the winemaking process.
These kits allow for the isolation of DNA from the blood of various species, including humans and will recover genomic DNA, mitochondrial DNA, viral DNA and bacterial DNA. The purified DNA is of excellent quality and yield and completely compatible with any downstream application including PCR, qPCR and genotyping.
Blood DNA Isolation Mini Kit
Norgen’s Blood DNA Isolation Mini Kit is designed for the rapid preparation of DNA from up to 200 µL of whole blood using a rapid spin column protocol. Preparation time for a single sample is less than 30 minutes and each kit contains sufficient materials for 50 preparations.
Blood DNA Isolation Midi Kit
Norgen’s Blood DNA Isolation Kit is designed for the rapid spin column preparation of DNA from 0.3 to 2 mL volumes of whole blood. Preparation time for a single sample is less than 30 minutes, and each kit contains sufficient materials for 20 preparations.
Blood DNA Isolation Maxi Kit
This kit is designed for the rapid preparation of DNA from 3 mL up to 10 mL of whole blood. Preparation time for a single sample is less than 30 minutes.
Blood DNA Isolation 96-Well Kit (High Throughput)
This kit provides a rapid method for the high-throughput isolation of DNA from up to 200 µL of whole blood. Fast and easy processing using either a vacuum manifold or centrifugation.
Blood DNA Isolation Kit (Magnetic Bead System)
Norgen’s Blood DNA Isolation Kit (Magnetic Bead System) is designed for the rapid preparation of genomic DNA from up to 200 µL of whole blood from various species, including human. Purification is based on magnetic beads as the separation matrix. Norgen’s magnetic beads bind DNA under optimized salt concentrations and releases the bound DNA under low salt and slightly alkali conditions. The genomic DNA is preferentially purified from other cellular proteinaceous components. Typical yields of genomic DNA will vary depending on the cell density of the blood sample. The purified genomic DNA is fully digestible with all restriction enzymes tested, and is completely compatible with downstream applications including real-time PCR, NGS and microarray analysis.
Blood DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)
96-well format for high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.
Figure 1 / 19
Click for expanded view
| Kit Specifications | |
| Maximum Blood Input | 200 µL |
| Average Yield (200 µL blood)* | 4-12 µg |
| Average Purity (OD260/280) | 1.8 – 1.9 |
| Time to Complete Purifications | 40 minutes (hands-on time Cat. 59800) 50 minutes (hands-on time Cat. 62600) |
* Average DNA yield will vary depending on the donor
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 1 year after the date of shipment when stored at room temperature.
| Component | Cat. 46300 (50 preps) | Cat. 46380 (100 preps) | Cat. 51400 (20 preps) | Cat. 31200 (12 preps) | Cat. 46350 (192 preps) | Cat. 59800 (50 preps) | Cat. 62600 (192 preps) |
|---|---|---|---|---|---|---|---|
| Lysis Buffer B | 20 mL | 2 x 20 mL | 2 x 40 mL | 2 x 110 mL | 2 x 40 mL | 20 mL | 1 x 40 mL 1 x 20 mL |
| Solution WN | 18 mL | 2 x 18 mL | 55 mL | 55 mL | 55 mL | 18 mL | 55 mL |
| Wash Solution A | 18 mL | 2 x 18 mL | 2 x 38 mL | 2 x 38 mL | 2 x 38 mL | – | – |
| Elution Buffer B | 30 mL | 2 x 30 mL | 30 mL | 30 mL | 2 x 30 mL | 15 mL | 1 x 30 mL 1 x 15 mL |
| Proteinase K in Storage Buffer | 1.2 mL | 2 x 1.2 mL | 4.4 mL | 8 mL | 4.5 mL | 1.2 mL | 4 mL |
| Magnetic Bead Suspension | – | – | – | – | – | 2 x 1.1 mL | 8.5 mL |
| Maxi Spin Columns | – | – | – | 12 | – | – | – |
| Mini Spin Columns | 50 | 100 | – | – | – | – | – |
| Midi Spin Columns | – | – | 20 | – | – | – | – |
| 96-Well Plate | – | – | – | – | 2 | – | 2 |
| Adhesive Tape | – | – | – | – | 4 | – | 2 |
| Collection Tubes | 50 | 100 | 20 | 12 | – | – | – |
| 96-Well Collection Plate | – | – | – | – | 2 | – | – |
| Elution Tubes | 50 | 100 | 20 | 12 | – | 50 | – |
| 96-Well Elution Plate | – | – | – | – | 2 | – | 2 |
| Product Insert | 1 | 1 | 1 | 1 | 1 | 1 | 1 |