Tetra-(amido-PEG10-propargyl) is a branched crosslinker with four terminal propargyl groups. The propargyl groups can react with azide compounds or biomolecules via copper catalyzed Click Chemistry to form a stable triazole linkage.

Tetra-(amido-PEG10-propargyl) is a branched crosslinker with four terminal propargyl groups. The propargyl groups can react with azide compounds or biomolecules via copper catalyzed Click Chemistry to form a stable triazole linkage.

Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved.  Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSRLV08

Features

• Two racks built into one
• 50 µL – 0.2 mL volumes on one side
• 5 µL – 50 µL volumes on opposite side
• Sides are conveniently marked with volume recommendations
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down front side
• Rubber feet to help prevent slippage on both sides
• Stable, solid aluminum design
• Angled tube holes which allow the tubes to come close to magnets

Compatibility

• Up to 16 Individual PCR tubes per side
• Up to two, 8-strip PCR tube strips per side
• Any Magnetic Beads

Volumes

Maximum  – .2 mL 

Minimum  – 5 µL 

Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

Introduction

HiPure RNA Clean Up Kit provides a rapid and easy method for the purification and concentrate RNA from enzymatic reactions or for desalting the RNA samples. RNA purified using HiPure RNA Clean Up Kit is ready for all downstream applications such as RT-PCR, Northern blotting, mRNA purification, nuclease protection, and in vitro translation.

Details

Specifications

Features	Specifications
Main Functions	Purification and concentration of RNA（mRNA>200nt or miRNA）from transcription products, DNase cleavage products, labeled products, and crude RNA products
Applications	Sequencing, ligation, enzyme digestion, RT-PCR, labeling, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Crude RNA, enzymatic reaction solution
Sample amount	≤100μl
Recovery	90%
Elution volume	≥15μl
Time per run	≤15 minutes
Liquid carrying volume per column	800μl
Binding yield of column	100μg

Principle

The HiPure system uses a simple bind-wash-elute procedure. Binding buffer is added directly to the sample or other enzymatic reaction, and the mixture is applied to the column. Nucleic acids adsorb to the silica membrane in the high-salt conditions provided by the buffer. Impurities are washed away and pure RNA is eluted with a small volume of low-salt buffer provided or water, ready to use in all subsequent applications.

Advantages

• High recovery – recovery of RNA up to 90%
• Low elution volume – the elution volume can be as low as 15µl
• Fast – only 10 minutes for recovery by using column method
• General – suitable for various crude RNA products
• Wide range of fragment recovery:(>25nt RNA)

Kit Contents

Contents	R214402	R214403
Purification Times	50 Preps	250 Preps
Buffer GXP	30 ml	120 ml
Buffer RW2	20 ml	2 x 50 ml
RNase-Free Water	20 ml	60 ml
HiPure RNA Mini Columns I	50	250
2 ml Collection Tubes	50	250

Storage and Stability

The Kit can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

HiPure RNA Clean Up Kit provides a rapid and easy method for the purification and concentrate RNA from enzymatic reactions or for desalting the RNA samples. RNA purified using HiPure RNA Clean Up Kit is ready for all downstream applications such as RT-PCR, Northern blotting, mRNA purification, nuclease protection, and in vitro translation.