4x16x7ml Swing Buckets Rotor

Introduction

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.

Details

Specifications

Features	Specifications
Recommended application	gDNA medium yield preparation, total RNA medium yield preparation
Preservation conditions	Room temperature
Stability	Up to 4 years
Filter membrane	High quality glass fiber filter GF/B, 4 layers
Membrane aperture	1.0 μm
Maximum yield of alcohol mediated Binding	1 mg
Single liquid carrying capacity of column	4 ml
Minimum elution volume	500 μl
Withstand centrifugal force	3,000 – 5,000 x g
Centrifuge	Lowspeed centrifuge for 15ml centrifuge tubes, >3000 x g, swing-out Rotor, or Fixed Angle Rotor

Adsorption Mechanism

Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silica gel membrane, while other pollutants, mainly proteins, are removed by membrane washing.

Ordering information

CAT.No.	Product Name	Package
C13120	HiPure DNA Midi Column (4 x GF/B)with 15ml Collection Tubes	100/Bag

Purchase Guide

Item No.	Product Name	Membrane type/number of layers	Collection tubes	Plasmid DNA binding capacity (Physical adsorption)	gDNA/RNA binding capacity (Alcohol-mediated adsorption)	Minimum Elution volume	Liquid volume capacity
C13010	HiPure DNA Nano Column	2 layers GF/F	2ml without cap	5μg	20μg	10μl	700μl
C13011	HiPure DNA Micro Column	3 layers GF/F	2ml without cap	10μg	50μg	15μl	700μl
C13100	HiPure DNA Mini Column I	2 layers GF/B	2ml without cap	15μg	100μg	30μl	700μl
C13110	HiPure DNA Mini Column II	4 layers GF/B	2ml without cap	35μg	200μg	50μl	800μl
C13111	HiPure RNA Mini Column	3 layers GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13112	HiPure Viral Mini Column	3 layers GF/F	2ml without cap	30μg	200μg	30μl	800μl
C13113	HiPure CFDNA Mini Column	3 layers GF/F,1 layer GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13120	HiPure DNA Midi Column	4 layers GF/B	15ml Centrifuge tube	125μg	1mg	500μl	4ml
C13121	HiPure DNA Midi Column III	8 layers GF/B	15ml Centrifuge tube	250μg	1mg	500μl	4ml
C13122	HiPure DNA Maxi Column	4 layers GF/B	50ml Centrifuge tube	500μg	5mg	1000μl	20ml
C13123	HiPure DNA Maxi Column III	8 layers GF/B	50ml Centrifuge tube	1mg	5mg	1000μl	20ml
C13124	HiPure DNA Maxi Column C	8 layers GF/B	50ml high speed Centrifuge tube	1mg	5mg	700μl	12ml
C13130	HiPure DNA Plate	2 layers GF/F	1.6ml Plate	30μg	100μg	80μl	900μl
C13131	HiPure gDNA Plate	2 layers GF/B	1.6ml Plate	30μg	100μg	80μl	900μl

Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

Overview

• Extract high quality & quantity total RNA including miRNA
• No phenol step required; isolate all RNA in one fraction
• Bind & elute all RNA irrespective of size or GC content, without bias
• Very sensitive & linear down to a few cells without the need for carrier RNA
• Isolate from a wide variety of specimens
• Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services
• Available in a variety of formats to suit your needs
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits are suitable for the isolation of total RNA from a range of samples including cells, bacteria, yeast, virus and bodily fluids including plasma/serum, blood, saliva, CSF and more. Extract high quality and purity RNA with excellent RIN values and A₂₆₀/A₂₈₀ suitable for downstream applications including qRT-PCR, RT-PCR, microarrays, NGS and more. These kits purify all sizes of RNA from large mRNA, lncRNA down to microRNA (miRNA) in the same fraction without the requirement of phenol. Isolate all RNA sequences at an equal rate irrespective of size. Moreover, when the RNA sequences are small (e.g. miRNA), the column binds small RNAs regardless of their GC content.

Total RNA Purification 96-Well Kit (High Throughput and High Throughput Deep Well)

This 96-well kit provides a rapid method for the high-throughput isolation and purification of total RNA in 30 minutes using vacuum manifold, plate centrifuge, or liquid handlers with vacuum capabilities. Total RNA can be isolated from a broad range of sample sources including cultured cells, tissues, blood, serum, plasma, bacteria, yeast, fungi, and viruses.

Isolate RNA after Purifying EVs and Exosomes

Ultracentrifugation, Exoquick, Filtration

Cat. #	Name	Elution Volume	Plasma/Serum	Urine	Cell-Culture Media
55000	Plasma/Serum RNA Purification Mini Kit	10 – 25 µL	50 µL – 1 mL	250 µL – 1 mL	5 – 10 mL
35300	Total RNA Purification Micro Kit	20 – 50 µL	1 – 4 mL	2 – 10 mL	10 – 20 mL
17200	Total RNA Purification Kit	50 – 100 µL	4 – 10 mL	11 – 30 mL	20 – 35 mL

Details

Supporting Data

Figure 1 / 13

Previous

Next

Click for expanded view

Kit Specifications
Maximum Binding Capacity	Up to 50 μg RNA
Maximum Loading Volume	650 μL
Size of RNA Purified	All sizes, including small RNA (< 200 nt)
Maximum Amount of Starting Material
Animal Cells	3 x 106 cells
Animal Tissues	10 mg (for most tissues*)
Blood	100 μL
Plasma/Serum	200 μL
Bacteria	1 x 109 cells
Yeast	1 x 108 cells
Fungi	50 mg
Plant Tissues	50 mg
Time to Complete 10 Purifications	20 minutes
Average Yield
HeLa Cells (1 x 106 cells)	15 μg
E. coli (1 x 109 cells)	50 μg

* for isolating total RNA from larger amounts of tissue, please use Norgen’s Animal Tissue RNA Purification Kit (Cat# 25700)

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. These kits are stable for 2 years after the date of shipment.

Component	Cat. 17200 (50 preps)	Cat. 37500 (100 preps)	Cat. 17250 (250 preps)	Cat. 17270 (500 preps)	Cat. 24300 (192 preps)	Cat. 24370 (576 preps)	Cat. 24350 (192 preps)	Cat. 24380 (576 preps)
Buffer RL	40 mL	2 x 40 mL	175 mL	350 mL	2 x 40 mL	350 mL	2 x 40 mL	350 mL
Wash Solution A	38 mL	2 x 38 mL	148 mL	1 x 148 mL 1 x 74 mL	2 x 38 mL	1 x 74 mL 1 x 148 mL	2 x 38 mL	1 x 74 mL 1 x 148 mL
Elution Solution A	6 mL	2 x 6 mL	30 mL	60 mL	2 x 20 mL	60 mL	2 x 20 mL	60 mL
Mini Spin Columns	50	100	250	500	–	–	–	–
96-Well Isolation Plate	–	–	–	–	2	6	–	–
96-Well Isolation Plate (Deep Well)	–	–	–	–	–	–	2	6
Adhesive Tape	–	–	–	–	4	12	4	12
Collection Tubes	50	100	250	500	–	–
96-Well Collection Plate	–	–	–	–	2	6	–	–
96-Well Collection Plate (Deep Well)	–	–	–	–	–	–	2	6
Elution Tubes (1.7 mL)	50	100	250	500	–	–
96-Well Elution Plate	–	–	–	–	2	6	–	–
96-Well Elution Plate (Deep Well)	–	–	–	–	–	–	2	6
Product Insert	1	1	1	1	1	1	1	1

Introduction

This product is suitable for extracting RNA  from 1ml anticoagulant blood (fresh or frozen blood/cryopreservation blood), lymphocytes, buffy coat, bone marrow, cultured cells, etc using Magzol reagents. It can specially extract high quality RNA from frozen blood samples.

Details

Specifications

Features	Specifications
Main Functions	Isolation total RNA from 1ml anticoagulant blood (fresh or frozen blood/cryopreservation blood), lymphocytes, buffy coat, bone marrow, cultured cells, etc using Magzol reagents.
Applications	RT-PCR, cDNA synthesis, second generation sequencing
Purification method	Polydisperse magnetic beads
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	anticoagulant blood, lymphocytes, buffy coat, bone marrow, cultured cells
Sample amount	1ml whole blood (fresh or frozen blood)

Principles

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested by lysis buffer and protease, and RNA/DNA is released into the lysis buffer. Add binding solution and magnetic particles to adsorb RNA/DNA, while proteins are not adsorbed and removed. The particles adsorbed with DNA/RNA are washed with washing buffer to remove proteins and other impurities, then washed with ethanol to remove salt, and finally digested with DNase to remove DNA. RNA is recovered by adding binding solution, and finally the RNA is eluted with low salt buffer. The eluted RNA can be directly used for experiments such as RT-PCR, NGS and virus detection.

Kit Contents: Bottle

Contents	R661301	R661302	R661303
Purification Times	48 Preps	96 Preps	480 preps
DNase I	600 μl	2 x 600 μl	10 x 600 µl
DNase Buffer	20 ml	30 ml	150 ml
MagPure Particles N	2.5 ml	5.0 ml	28 ml
MagZol 3BD	65 ml	140 ml	3 x 200 ml
Buffer ALB2	40 ml	60 ml	350 ml
Buffer BCP2	10 ml	15 ml	80 ml
Buffer MW2*	20 ml	50 ml	2 x 100 ml
RNase Free Water	10 ml	20 ml	60 ml

Storage and Stability

DNase I should be shipped with ice pack or dry ice and stored at -20°C upon arrival. MagPure Particles N, MagZol 3BD and Buffer BCP2 should be stored at 2–8°C upon arrival. DNase I should be stored at -20°C. However, short-term storage at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions.

This product is suitable for extracting RNA from 1ml anticoagulant blood (fresh or frozen blood/cryopreservation blood), lymphocytes, buffy coat, bone marrow, cultured cells, etc using Magzol reagents. It can specially extract high quality RNA from frozen blood samples.