The Norgen UltraRanger 1 kb DNA Ladder is prepared to ensure quality and batch-to-batch consistency. Our UltraRanger contains fifteen discrete fragments ranging from 300 bp to 24000 bp with higher intensity reference bands at 5000 bp and 10000 bp. This ladder is ideal for sizing digested DNA of high molecular weight.
Contents
1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).
Figure 1 / 1
Click for expanded view
UltraRanger 1kb DNA Ladder (Cat# 12100) – 100 loads
Ladder Properties:
• Fifteen discrete fragments ranging from 300 bp to 24000 bp
• Higher intensity reference bands at 5000 bp and 10000 bp
| Fragment | Size (bp) | Mass (ng) |
| 1 | 24000 | 30 |
| 2 | 14000 | 27 |
| 3 | 10000 | 60 |
| 4 | 8000 | 44 |
| 5 | 6000 | 36 |
| 6 | 5000 | 55 |
| 7 | 4000 | 49 |
| 8 | 3000 | 39 |
| 9 | 2500 | 35 |
| 10 | 2000 | 30 |
| 11 | 1500 | 33 |
| 12 | 1000 | 10 |
| 13 | 700 | 21 |
| 14 | 500 | 18 |
| 15 | 300 | 11 |
Recommended Use:
Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.
Storage:
Stable at room temperature. For longer term storage, -20°C is recommended.
This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.
Norgen’s Saliva/Swab RNA Purification Kits provide a rapid method for the purification of total RNA from non-preserved saliva and nasal/throat swabs, and from preserved saliva collected on Norgen’s Saliva RNA Collection and Preservation Devices (Cat. RU53800) or preserved swabs collected in Norgen’s Total Nucleic Acid Preservative Tubes (Cat. 69200). Purification is based on using Norgen’s proprietary resin separation matrix. RNA is preferentially purified from other cellular components such as proteins, without the use of phenol or chloroform. The kit allows the purification of total RNA, including viral and bacterial RNA, irrespective of size or GC content. The purified RNA is eluted in an Elution Solution that is compatible with all downstream applications including PCR, qPCR, methylation-sensitive PCR and Southern Blot analysis, microarrays, and NGS.
This kit offers a range of elution volumes, with a minimum elution volume of 75 μL and a maximum elution volume of 100 μL. Complete 10 purifications in as little as 15 minutes.
High throughput 96-well plate format for rapid purifications with very consistent well-to-well RNA isolation. Purified RNA is suitable for a variety of downstream applications , including Small RNA Sequencing. Find out more information about Norgen’s NGS Services.
Figure 1 / 8
Click for expanded view
| Kit Specifications | |
| Sample Volume Range | 250 µL |
| Size of RNA purified | All sizes, including small RNA (<200 nt) |
| Minimum Elution Volume | 75 µL |
| Maximum Elution Volume | 100 µL |
| Time to complete 96 purifications | 30 minutes |
| Average Yield | ≥ 1 µg **varies from sample to sample |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Kit Component | Cat. 69100 (50 preps) | Cat. 69300 (192 preps) |
|---|---|---|
| Lysis Buffer A | 30 mL | 100 mL |
| Solution WN | 18 mL | 55 mL |
| Wash Solution A | 18 mL | 2 x 38 mL |
| Elution Solution A | 6 mL | 20 mL |
| Mini Spin Columns | 50 | – |
| Collection Tubes | 50 | – |
| Elution Tubes (1.7 mL) | 50 | – |
| 96-Well Isolation Plate | – | 2 |
| 96-Well Collection Plate | – | 2 |
| 96-Well Elution Plate | – | 2 |
| Adhesive Tape | – | 4 |
| Product Insert | 1 | 1 |
Permagen’s new low elution bar magnet plate for PCR applications features an individual bar magnet for each row of wells making it the perfect solution for hand pipetting. With its SBS footprint and integrated cushion base, scaling up to the robot is a snap. Available in kit form as well, which includes our X39602 top plate for 0.2 mL tubes & strips
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
A012424 (magnet plate only)
A012424KT (Includes top plate kit for 0.2 mL strips and tubes)
Minimum – 5 µL
Maximum – 140 mL
Permagen’s new low elution bar magnet plate for PCR applications features an individual bar magnet for each row of wells making it the perfect solution for hand pipetting. With its SBS footprint and integrated cushion base, scaling up to the robot is a snap. Available in kit form as well, which includes our X39602 top plate for 0.2 mL tubes & strips