24×1.5/2ml Angle rotor 

Overview

• Isolate all sizes of circulating and exosomal RNA, including microRNA
• Versatile plasma and serum input volumes
• Concentrate circulating and exosomal RNA into small elution volumes
• Isolate inhibitor-free circulating and exosomal RNA
• Bind and elute all RNA irrespective of size or GC content, without bias
• Available in Spin Column or 96-well plate formats
• Process 96-well plates using vacuum or centrifugation
• Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services
• Compatible with Streck Cell-Free RNA BCT® Tubes
• Purification is based on Norgen’s proprietary resin matrix

These kits are able to isolate all sizes of circulating and exosomal RNA, including microRNA, without the use of phenol or chloroform. The slurry format provides an advantage over other available kits in that it does not require extension tubes for the purification of free-circulating and exosomal RNA from large sample volumes. RNA can be isolated from either fresh or frozen samples using this kit. This kit is suitable for the isolation of RNA from serum or plasma prepared from blood collected only on either EDTA or citrate. Plasma samples prepared from blood collected on heparin should not be used as heparin can significantly interfere with many downstream applications including RT-PCR. The purified plasma/serum free-circulating and exosomal RNA is eluted in an elution solution that is compatible with PCR, qPCR, methylation-sensitive reverse transcription qPCR, reverse transcription PCR, Northern blotting, RNase protection and primer extension, expression array assays, and NGS.

Free-circulating plasma and serum RNA can serve as both tumor- and fetal-specific markers for cancer detection and prenatal diagnosis. As well, free-circulating RNAs have the potential to provide biomarkers for other disease states. Free-circulating RNA in plasma or serum are usually present as short fragments of less than 1000nt, and free-circulating miRNA (21nt) can also be found in plasma and serum.

Plasma/Serum Circulating and Exosomal RNA Purification Kit (Slurry)

Norgen’s Plasma/Serum Circulating and Exosomal RNA Purification Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating RNA and exosomal RNA from plasma and serum samples ranging from 0.25 mL to 5 mL.

Plasma/Serum Circulating and Exosomal RNA Purification Mini Kit (Mini Slurry)

Norgen’s Plasma/Serum Circulating and Exosomal RNA Purification Mini Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating and exosomal RNA from plasma and serum samples ranging from 0.25 mL to 2 mL.

Plasma/Serum Circulating and Exosomal RNA Purification 96-Well Kit (High Throughput Slurry)

Norgen’s Plasma/Serum Circulating and Exosomal RNA Purification 96-Well Kit (Slurry Format) provides a high throughput method for isolating circulating and exosomal RNA from plasma and serum samples using either a vacuum manifold or centrifugation.

Plasma/Serum Circulating and Exosomal RNA Purification Maxi Kit (Maxi Slurry)

Norgen’s Plasma/Serum Circulating and Exosomal RNA Purification Maxi Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating RNA and exosomal RNA from various amounts of plasma/serum ranging from 2 mL to 5 mL.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications – 96-well
Minimum Plasma/Serum Input	0.25 mL
Maximum Plasma/Serum Input	2 mL
Size of RNA Purified	All sizes, including microRNA
Time to Complete Purification	< 1 hour

Cat.29500 Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.

Component	Cat. 51000 (50 preps)	Cat. 29500 (96 preps)	Cat. 42800 (50 preps)	Cat. 50900 (25 preps)
Slurry C1	–	–	–	6 mL
Slurry C2	12 mL	–	12 mL	–
Slurry C3	–	20 mL	–	–
Lysis Buffer A	2 x 130 mL	4 x 100 mL	2 x 130 mL	2 x 130 mL
Wash Solution A	38 mL	2 x 38 mL	38 mL	18 mL
Elution Solution A	6 mL	20 mL	6 mL	6 mL
Mini Filter Spin Columns	50	–	50	25
96-Well Filter Plate	–	1	–	–
Adhesive Tape	–	1	–	–
Collection Tubes	50	–	50	25
96-Well Collection Plate	–	1	–	–
Elution Tubes (1.7 mL)	50	–	50	25
96-Well Elution Plate	–	1	–	–
Product Insert	1	1	1	1

Description 

The ExcelTaq™ 2X Fast Q-PCR Master Mix (SYBR, no ROX) is a ready-to-use reagent with all the essential components for quantitative real-time PCR (qPCR) except primers and templates. The master mix contains a highly stable hot-start Taq polymerase in an optimized buffer with dsDNA specific SYBR green fluorescent dye. Consequently, the ExcelTaq™ 2X Fast Q-PCR Master Mix (SYBR, no ROX) features high stability during storage, even at 37°C for weeks. In addition to high sensitivity and signal intensity, the ExcelTaq™ 2X Fast Q-PCR Master Mix (SYBR, no ROX) performs a low background/ high specificity qPCR results, as well as a better compatibility with fast PCR program. 

With inert smart blue contrast dye, the ExcelTaq™ 2X Fast Q-PCR Master Mix (SYBR, no ROX) is ready-to-use and greatly reduces pipetting errors, while largely improving the reproducibility of the process. The ExcelTaq™ 2X Fast Q-PCR Master Mix (SYBR, no ROX) is also compatible with ROX reference dye if ROX is recommended by the manufacturer of the qPCR system. This master mix allows sensitive, precise amplification, real-time tracking of the amplification process, and simultaneous quantification for targeted DNA molecules.

Features

• High Stability
• Fast Hot Start
• High Sensitivity
• Low Background
• Suitable for Fast Program 
• Smart Blue Contrast Dye 

Storage

Protect from light.
Aliquot to avoid multiple freeze-thaw cycles. 
-20°C for 12 months

Permagen’s  15 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to six, 15 mL Centrifuge tubes

Accommodates any common 15 mL Centrifuge Tubes

Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet

Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSR6X15

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy aspiration without disturbing bead pellet 
• Rubber feet to help prevent slippage
• Stable design
• Four magnets per tube 

Compatibility

• Up to six 15 mL Centrifuge Tubes
• Any Magnetic Beads

Volumes

Maximum Volume – 15 mL

Minimum Volume – 7 mL