8×20ml Angle Rotor 

Safety Features

1. User-Friendly Design: The chamber lid and tabletop are covered with heat-insulating resin materials, providing both protection against burns and an aesthetically pleasing appearance. The upward-opening flip-top door saves space, while the rounded corners prevent injury. The specially designed steam discharge and collection system minimizes steam burn risks and enhances operational convenience.

2. Interlock Mechanism and Safety Protection: The safety interlock system is designed to be more sensitive and secure. The chamber lid cannot be opened if there is pressure or steam inside the chamber. The lid can only be opened when the pressure gauge reads “0” MPa. The sterilizer will not start heating if the chamber lid is not properly locked. These features enhance the overall safety of the machine.

3. Over-temperature and Heating Protection: The system continuously monitors the temperature inside the sterilization chamber. If the temperature becomes too high or heating is abnormal, power will be automatically cut off to prevent overheating.

4. Automatic Fault Detection System: The machine performs an automatic self-check when powered on. If a fault occurs during operation, an audible alarm will sound, and a fault code will be displayed.

5. Lid Closure Check System: The system automatically detects whether the chamber lid is securely locked. If the lid is not properly locked, the sterilizer will not start.

6. Leakage, Over-current, and Short-Circuit Protection: If there is leakage in the heating elements or other components, or if over-current or short-circuit conditions occur, the system will automatically cut off power to prevent user injury.

7. Water Shortage and Independent Dry-Burning Protection: Equipped with a low water level sensor and independent dry-burning protection device, the system can monitor the water level in the chamber in real-time to prevent dry burning and avoid false readings. If the low water level sensor fails, the overheat and dry-burning protection system will automatically activate, cut off power to the heating ring, and sound an alarm to ensure safety.

8. Dual Pressure Protection: The system includes both a mechanical safety valve and an electronic over-pressure protection system. If pressure becomes abnormal, the system will relieve pressure and cut off power while sounding an alarm.

9. Back end Safety Testing: The system can be periodically tested for safety and protective measures.

10. Over-pressure Testing: Regular testing ensures that the instrument’s over-pressure protection system can automatically cut off power or that the safety valve can open to relieve pressure.

11. Performance Testing: The instrument’s safety performance has been tested by national authorized inspection agencies, and a test report is available.

Technical Parameters

Note: The upper limits for cooling lock door temperature and exhaust temperature are related to the boiling point.

Other Optional Accessories

1. Dot Matrix Printer: Capable of printing temperature, time, F0 value, and pressure data. USB data export and curve plotting.

2. Stainless Steel Basket with Base.

3. Pressure Sensor

4. Stainless Steel Bucket

5. Item Thermometer

6. 3Q Validation Adapter

Features and functions:

1. Large-diameter sterilization chamber：The 40 cm large-diameter sterilization chamber provides an exceptionally spacious environment to meet a wide range of sterilization needs.

2. Sterilization temperature：105-138℃.

3. Exhaust control ：After sterilization is complete, the exhaust valve can automatically open to release the exhaust at a pre-set temperature.

4. Verification interface: Provides temperature and pressure inspection ports for easy calibration.

5. Saturated steam monitoring：The system automatically monitors the expulsion of cold air to ensure a pure steam sterilization environment, guaranteeing optimal sterilization effectiveness.

6. Pressure performance：The chamber is designed to withstand a pressure of up to 0.35 MPa, and each unit is tested with a water pressure of up to 0.44 MPa. Advanced pressure protection ensures the safety load of the equipment.

7. Intelligent control system:The microcomputer chip-based intelligent control system monitors the temperature and pressure inside the sterilization chamber in real-time. The chamber lid can only be opened under safe temperature and pressure conditions. The system also provides fully automatic control of the sterilization process and allows for convenient maintenance, inspection, calibration, recording, and future upgrades.

8. Six preset programs:Includes six fixed programs for liquid sterilization and holding, solid sterilization and drying, agar melting and holding, and waste sterilization.

9. Memory storage system:Users can set their own parameters, create multiple programs, and access them at any time. The system allows for operation permissions to be set at three levels—user, administrator, and engineer—to facilitate effective use and management of the sterilizer.

10. Door-opening temperature: Each program can be set with a specific cooling lock door-opening temperature based on the thermal inertia of the sterilized items. This prevents users from opening the door when the items (especially liquid sterilized items) are still in an unsafe condition, thus avoiding burns.

11. Drying function: Thorough drying that meets CE standards, with a cooling lock mechanism.

12. One-touch inquiry function: Allows checking of current time, total number of sterilization cycles, fault occurrence time, and codes.

13. Scheduled start function: Allows you to set a start time so that the sterilizer automatically starts at the scheduled time.

Model:
HB65/ HB90/ HB110

Overview

• Convenient – With the ready-to-use Master Mix, the user needs only to add template to the master mix and enzyme in order to set up the reverse transcriptase reaction
• Time Savings – Set up RT reactions in a shorter time since less pipetting steps are required
• Cost Efficient – No need to buy separate enzymes, dNTPs and buffers. All are included with the ready-to-use Master Mix kits
• High Sensitivity and Yield – the optimized Master Mix allows for highly sensitive amplifications with high yields of PCR products
• Robust Enzyme – broad range of working temperatures from 37°C to 60°C. Capable of amplifying difficult templates with a high degree of reproducibility

TruScript Reverse Transcriptase is Available in Three Convenient Formats:

1. TruScript Reverse Transcriptase Kit (Cat.#54440)

This kit contains 5X RT Buffer and a vial of TruScript Enzyme Mix (200 units/µL). This enzyme can be used for reverse-transcription reactions with any user-supplied primers.

2. TruScript First Strand cDNA Synthesis Kit (Cat.#54420)

This is an all-in-one, ready-to-use product for simple set-up of reverse transcription of total RNA (both poly A- or non-poly A-containing transcripts).

The kit contains the 2x Reaction Mix and the TruScript Enzyme Mix. The 2x Reaction Mix contains a blend of buffer, nucleotides and primers (oligo dT and random hexamers) for effective cDNA synthesis from total RNA transcripts.

3. TruScript First Strand cDNA Synthesis Kit for mRNA (Cat.#54400)

This is an all-in-one, ready-to-use product for simple set-up of reverse transcription of messenger RNA (poly A-containing transcripts).

The kit contains the 2x Reaction Mix and the TruScript Enzyme Mix. The 2x Reaction Mix contains a blend of buffer, nucleotides and oligo dT primer for the effective cDNA synthesis from total RNA transcripts or enriched mRNA sample.

Which TruScript Kit is Best for Your Needs?

Details

Supporting Data

Figure 1 / 2

Previous

Next

Click for expanded view

TruScript First Strand cDNA Synthesis Kit for mRNA (Cat.# 54400) – Kit Components

1. TruScript Enzyme Mix
2. 2x Reaction Mix
3. Nuclease-Free Water 
4. Product Insert

Storage Conditions and Product Stability

Norgen’s TruScript Reverse Transcriptase and the 5x RT Buffer should be stored at -20°C.  These reagents should remain stable for at least 1 year in their unopened containers.