Attogene’s Mercury Lateral Flow Kit can be used for the screening of Mercury in water samples at 10 ppb in the field.
Mercury contamination is a serious worldwide environmental problem. As it is difficult to detoxify by chemical or biological methods, gradual Mercury ion accumulation in the nervous and cardiovascular systems of the human body can subsequently cause serious diseases. Long-term health consequences of drinking Mercury-contaminated food and water include brain, heart, kidney, lungs and immune system problems for adults, and the physical and mental development delays in infants and children. Attogene’s Mercury Lateral Flow test gives results conforming of 10ppb or greater. Using the supplied pipette, simply fill the vial with your water sample, place the water into the sample port and wait 5 minutes.
Applications for Fish and Shellfish possible:
Mercury Levels in Commercial Fish and Shellfish (1990-2012)
Samples requiring regulatory action should be confirmed.
Screening of Mercury in water samples at 10 ppb
Format: 10 tests (5 tests/5 controls)
Run Time: 5 Minutes
The Opentrons Flex Gripper GEN1 attaches to the gantry and is capable of moving labware across the deck and on or off modules such as the Magnetic Block or Thermocycler. It can also access the additional slots to the side of the main deck to replenish tips or labware. The gripper can be used with any pipette configuration.
Included with the gripper is a calibration pin that enables automatic calibration to ensure positional accuracy. Currently, the gripper is optimized for use with the following labware items:
– NEST 2 mL 96 Deep Well Plate, V bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 Well Plate Flat
– All Opentrons Flex tip racks
The Opentrons Flex Gripper GEN1 attaches to the gantry and is capable of moving labware across the deck and on or off modules such as the Magnetic Block or Thermocycler. It can also access the additional slots to the side of the main deck to replenish tips or labware. The gripper can be used with any pipette configuration.
Included with the gripper is a calibration pin that enables automatic calibration to ensure positional accuracy. Currently, the gripper is optimized for use with the following labware items:
– NEST 2 mL 96 Deep Well Plate, V bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 Well Plate Flat
– All Opentrons Flex tip racks
Thermal adapter for PCR plates, e.g., NEST 96 Well Plate 100 µL PCR Full Skirt. Compatible with the Opentrons Heater-Shaker Module.
Thermal adapter for PCR plates, e.g., NEST 96 Well Plate 100 µL PCR Full Skirt. Compatible with the Opentrons Heater-Shaker Module.