Micro High Speed Centrifuge TG16E 

Overview

• Detection kits for Clostridium difficile
• CE-IVD marked version available for in vitro diagnostic use
• Available in TaqMan format for analysis

Clostridium difficile is rod-shaped, gram positive bacterium. It is the main causal agent of antibiotic-associated diarrhea and pseudomembranous colitis. The colonization of intestines by C. difficile is usually associated with the elimination of natural intestinal flora as a result of antibiotic application and is frequently reported in health care centers. While C. difficile infection could be severe and life-threatening, particularly among the elderly, many patients are asymptomatic making diagnosis challenging during outbreaks. The tradition method of detecting C. difficile infection is by cytotoxicity test of the toxin produced by the bacterium, but such protocols usually require extensive time before conclusion can be made.

Clostridium difficile TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

Clostridium difficile TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. TM37150 (100 preps)	Cat. TM37110 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
Clostridium difficile Primer & Probe Mix	280 μL	280 μL
Clostridium difficile Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Introduction

029010 Gram Stain

Usage:For Gram Stain Test.

Specification: 10ml*4 vials

10ml*4vials

Overview

• High yield and high purity DNA ready for any application
• Available in a variety of formats to properly suit your needs
• Compatible with blood collected on a variety of commercially available tubes

These kits allow for the isolation of DNA from the blood of various species, including humans and will recover genomic DNA, mitochondrial DNA, viral DNA and bacterial DNA. The purified DNA is of excellent quality and yield and completely compatible with any downstream application including PCR, qPCR and genotyping.

Blood DNA Isolation Mini Kit

Norgen’s Blood DNA Isolation Mini Kit is designed for the rapid preparation of DNA from up to 200 µL of whole blood using a rapid spin column protocol. Preparation time for a single sample is less than 30 minutes and each kit contains sufficient materials for 50 preparations.

Blood DNA Isolation Midi Kit

Norgen’s Blood DNA Isolation Kit is designed for the rapid spin column preparation of DNA from 0.3 to 2 mL volumes of whole blood. Preparation time for a single sample is less than 30 minutes, and each kit contains sufficient materials for 20 preparations.

Blood DNA Isolation Maxi Kit

This kit is designed for the rapid preparation of DNA from 3 mL up to 10 mL of whole blood. Preparation time for a single sample is less than 30 minutes.

Blood DNA Isolation 96-Well Kit (High Throughput)

This kit provides a rapid method for the high-throughput isolation of DNA from up to 200 µL of whole blood. Fast and easy processing using either a vacuum manifold or centrifugation.

Blood DNA Isolation Kit (Magnetic Bead System)

Norgen’s Blood DNA Isolation Kit (Magnetic Bead System) is designed for the rapid preparation of genomic DNA from up to 200 µL of whole blood from various species, including human. Purification is based on magnetic beads as the separation matrix. Norgen’s magnetic beads bind DNA under optimized salt concentrations and releases the bound DNA under low salt and slightly alkali conditions. The genomic DNA is preferentially purified from other cellular proteinaceous components. Typical yields of genomic DNA will vary depending on the cell density of the blood sample. The purified genomic DNA is fully digestible with all restriction enzymes tested, and is completely compatible with downstream applications including real-time PCR, NGS and microarray analysis.

Blood DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)

96-well format for high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.

Details

Supporting Data

Figure 1 / 19

Previous

Next

Click for expanded view

Kit Specifications
Minimum Blood Input	20 µL
Maximum Blood Input	200 µL
Column Binding Capacity	> 50 µg
Average Yield (200 µL of blood)	4-12 µg*
Time to Complete 10 Purifications	30 minutes

*Yield will vary depending on the type of blood processed

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 1 year after the date of shipment when stored at room temperature.

Component	Cat. 46300 (50 preps)	Cat. 46380 (100 preps)	Cat. 51400 (20 preps)	Cat. 31200 (12 preps)	Cat. 46350 (192 preps)	Cat. 59800 (50 preps)	Cat. 62600 (192 preps)
Lysis Buffer B	20 mL	2 x 20 mL	2 x 40 mL	2 x 110 mL	2 x 40 mL	20 mL	1 x 40 mL 1 x 20 mL
Solution WN	18 mL	2 x 18 mL	55 mL	55 mL	55 mL	18 mL	55 mL
Wash Solution A	18 mL	2 x 18 mL	2 x 38 mL	2 x 38 mL	2 x 38 mL	–	–
Elution Buffer B	30 mL	2 x 30 mL	30 mL	30 mL	2 x 30 mL	15 mL	1 x 30 mL 1 x 15 mL
Proteinase K in Storage Buffer	1.2 mL	2 x 1.2 mL	4.4 mL	8 mL	4.5 mL	1.2 mL	4 mL
Magnetic Bead Suspension	–	–	–	–	–	2 x 1.1 mL	8.5 mL
Maxi Spin Columns	–	–	–	12	–	–	–
Mini Spin Columns	50	100	–	–	–	–	–
Midi Spin Columns	–	–	20	–	–	–	–
96-Well Plate	–	–	–	–	2	–	2
Adhesive Tape	–	–	–	–	4	–	2
Collection Tubes	50	100	20	12	–	–	–
96-Well Collection Plate	–	–	–	–	2	–	–
Elution Tubes	50	100	20	12	–	50	–
96-Well Elution Plate	–	–	–	–	2	–	2
Product Insert	1	1	1	1	1	1	1