1. Widely used in hospital, laboratory and blood bank.
2. Brushless DC motor for model TD6 which in great torque, free maintenance, no powder pollution, quick in speed up and down.
3. The flexible axle driven system which drive the rotor directly, smooth in operation, low noise and small vibration.
4. Micro computer control system, digital display the RCF、time and speed. There are 10 kinds of program and 10 kinds of acceleration and deceleration for your choice.
5. Electric lid lock, compact design, super speed and imbalance protection.
6. The centrifuge body is made of high-quality steel, safe and reliable.
TD6 Technical Parameters:
Max speed
6000rpm
Max RCF:
4430xg
Max volume
6x100ml
Noise:
≤55dBA
Timer
0~99min
Net weight:
32KG
Dimension(HxDxW):
540×370×280mm
Power supply
AC 110/220V 50HZ/60hz
Speed accuracy
±20rpm
Acc/Dec
10 Kinds
Certifications
CE, ISO & Calibration report is available.
Warranty
1 Year
Matched Rotors for TD6:
Order No.
Rotor
Max Speed (rpm)
Max Volume(ml)
Max. RCF(×g)
D6-1
Angle Rotor
6000
6×15/10/7/5ml
3660
D6-2
Angle Rotor
6000
12×15/10/7/5ml
4430
D6-3
Angle Rotor
6000
6×50ml
4110
D6-4
Angle Rotor
6000
4×50ml
3620
D6-5
Angle Rotor
6000
4×100ml
3790
D6-6
Angle Rotor
5000
24×15/10/7/5ml
3500
D6-7
Angle Rotor
4000
12×50ml
2470
D6-8
Angle Rotor
5000
6×100ml
3130
D6-9
Swing Rotor
5000
4x100ml
4420
D6-10
Swing Rotor
5000
4x50ml
4420
D6-11
Swing Rotor
5000
4x4x15ml
2820
D6-12
Swing Rotor
4000
4x6x10ml
2580
D6-13
Swing Rotor
4000
4x4x10ml
2580
D6-14
Microplate
4000
2x2x96well
2020
Other Products
resDNASEQ CHO Residual DNA Quantitation kit (Without DNA Control )
Product Info
Document
Product Info
Description
Features of there sDNASEQ CHO Residual DNA Quantitation kit include:
Simpler and Rapid
Only three steps will be need for Sample Preparation and All components of the Sample Preparation Kit can be stored at room temperature.
Only one Reagent for qPCR;
Only 1.5 hours will be needed for the whole test.
Accurate
Perfect amplification curve, good amplification efficiency and good precision.
Highly sensitive quantitation using proven TaqMan™ real-time qPCR technology.
Limit of Detection (LOD): 0.01 fg/μL; Limit of Quantification (LOQ): 0.3 fg/μL
The recovery rate of different concentration samples in the linear range is between 70% and 130%.
Kit Performance
Fig 1. Only three steps will be need for Sample Preparation and only 20 minitutes will be taken for Sample Preparation.
Fig 2. Seven concentration samples of 0.3fg/μL, 3fg/μL, 30fg/μL, 300fg/μL, 3pg/μL, 30pg/μL, 300pg/μL were detected. CV of each concentration was < 30%, Regression coefficient associated with standard solutions was 0.99992, and amplification efficiency was 100.370%.
Fig 3. Five concentration samples of 0.1fg/μL, 0.3fg/μL, 0.5fg/μL, 1fg/μL and 3fg/μL were detected, and 10 multiple wells were detected for each concentration. The CV of concentration values of samples with 0.3fg/μL and above concentrations were less than 30%.
Fig 4. DNA recovery can be determined by including samples spiked with known DNA amounts which are prepared from the corresponding DNA standards. Typically, the range for this value varies from 70% to 130%.
Fig 5. Only one Reagent for qPCR MIX.
Document
Note: Price not include shipment & duty, contact us to get full quote.
The resDNASEQ CHO Residual DNA Quantitation kit is designed for the quantification of residual DNA from CHO, in cell lines which are used for production of biopharmaceutical products. The Ducky Bio residual DNA CHO Assay, based on proven real-time qPCR technology, makes testing of residual DNA from the Chinese hamster ovary (CHO) cell line rapid, specifc. The PCR-based assay is sensitive and specific for DNA from the CHO cell line and not subject to detection of human or environmental DNA that might be introduced during sample handling. The kit was developed to meet the sensitivity requirements defined by WHO (10 ng CHO DNA per therapeutic dose).
For the simultaneous detection of up to four targets in one reaction. Save time, cost, and consumables while maximising data generation.
About
ProbeSure Multiplex Master Mix is an enhanced version of ProbeSure Master Mix, formulated to enable users to analyse up to four targets in one reaction well. For example, two bi-allelic SNPs or one reference gene and a further three genes of interest.
Users will require a plate reader capable of reading FAM, HEX, ATTO 550, ATTO 647N and ATTO 633 (the wavelengths of each of these can be found in our ProbeSure Multiplex Master Mix User Guide). ProbeSure Multiplex Master Mix is supplied at 2x concentration for convenience and is supplied with the ATTO 633 normalising dye at either high level (500 nM final concentration), low level (25 nM final concentration) or without ATTO 633.
Document
For the simultaneous detection of up to four targets in one reaction. Save time, cost, and consumables while maximising data generation.
Extract high quality & quantity total RNA including miRNA
No phenol step required; isolate all RNA in one fraction
Bind & elute all RNA irrespective of size or GC content, without bias
Very sensitive & linear down to a few cells without the need for carrier RNA
Isolate from a wide variety of specimens
Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services
Available in a variety of formats to suit your needs
Purification is based on spin column chromatography that uses Norgen’s resin separation matrix
These kits are suitable for the isolation of total RNA from a range of samples including cells, bacteria, yeast, virus and bodily fluids including plasma/serum, blood, saliva, CSF and more. Extract high quality and purity RNA with excellent RIN values and A260/A280 suitable for downstream applications including qRT-PCR, RT-PCR, microarrays, NGS and more. These kits purify all sizes of RNA from large mRNA, lncRNA down to microRNA (miRNA) in the same fraction without the requirement of phenol. Isolate all RNA sequences at an equal rate irrespective of size. Moreover, when the RNA sequences are small (e.g. miRNA), the column binds small RNAs regardless of their GC content.
Total RNA Purification 96-Well Kit (High Throughput and High Throughput Deep Well)
This 96-well kit provides a rapid method for the high-throughput isolation and purification of total RNA in 30 minutes using vacuum manifold, plate centrifuge, or liquid handlers with vacuum capabilities. Total RNA can be isolated from a broad range of sample sources including cultured cells, tissues, blood, serum, plasma, bacteria, yeast, fungi, and viruses.
* for isolating total RNA from larger amounts of tissue, please use Norgen’s Animal Tissue RNA Purification Kit (Cat# 25700)
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature. These kits are stable for 2 years after the date of shipment.