Propargyl-PEG13-acid

Introduction

Usages:
For selective enrichment of Salmonella.

Principle:
Peptone provide carbon and nitrogen sources to meet the needs of bacterial growth; lactose are fermentable sugars; selenite, sodium hydrogen inhibit Gram-positive bacteria and gram-negative enterobacteria most non-Salmonella; phosphate-buffered agent; L- cystine as a reducing agent.

Formulation(per liter):
Peptone: 5g
Lactose :4g
Sodium selenite: 4g
Disodium hydrogen phosphate: 10g
L- cystine: 0.01g
Final pH 7.0 ± 0.2

How to use:
1. Weigh 23g of the product , adding 1 L of distilled or deionized water , heated to boiling stirring until completely dissolved, dispensing flask, cooled to room temperature .
2. Pipette 10mL of pre-enrichment sample broth or 25mL and transferred species in the liquid sample flask in a sterile environment.
3.Place into incubator, cultured at 36 ± 1 for 18-24h.
4. Observe the results.

Quality control:
Quality control strains were inoculated ,and cultured at 36 ± 1 for 18-24h ,results show as follows:
strain name strain code growth feature
Salmonella typhi CMCC (B) 50071 good red, cloudy
Salmonella typhimurium CMCC (B) 50115 good red, cloudy
Escherichia coli ATCC25922 — remain unchanged

Storage: Store in a dark, cool and dry place, tighten the cap immediately after use. Storage period of three years.

500g

Overview

• Detection kits for Mycoplasma DNA
• Available in TaqMan format for analysis

Mycoplasma is a common and serious contaminant of cell cultures. Mycoplasma is often not visible and does not respond to antibiotics, and therefore it is a major issue that requires monitoring and early detection. Up to 30% of cell cultures may be contaminated with Mycoplasmas, the main contaminants being the species M. orale, M. laidlawii, M. arginini and M. hyorhinis. These organisms produce a variety of effects on the infected cells in culture, including changes in metabolism growth, viability and morphology, thereby altering the phenotypic characteristics of the host cells. Therefore there is an absolute requirement for routine, periodic assays to diagnose possible Mycoplasma contamination of all cell cultures, particularly continuous or established cell lines.

Mycoplasma TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

Mycoplasma TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. TM33150 (100 preps)	Cat. TM33110 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
Mycoplasma Primer & Probe Mix	280 μL	280 μL
Mycoplasma Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

DBCO-PEG5-DBCO is a bifunctional click chemistry reagent. DBCO will react with azide-bearing compounds or biomolecules to form a stable triazole linkage without copper catalyst. The hydrophilic PEG spacer arm can increase water solubility and membrane permability. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

DBCO-PEG5-DBCO is a bifunctional click chemistry reagent. DBCO will react with azide-bearing compounds or biomolecules to form a stable triazole linkage without copper catalyst. The hydrophilic PEG spacer arm can increase water solubility and membrane permability. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.