Propargyl-PEG5-CH2CO2H is an alkyne linker with a carboxylic acid. The carboxylic acid can react with primary amines to form stable amide bonds; activator (e.g. EDC, or HATU) is needed. The alkyne group can participate in copper catalyzed azide-alkyne Click Chemistry to form stable triazole linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG5-CH2CO2H is an alkyne linker with a carboxylic acid. The carboxylic acid can react with primary amines to form stable amide bonds; activator (e.g. EDC, or HATU) is needed. The alkyne group can participate in copper catalyzed azide-alkyne Click Chemistry to form stable triazole linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Norgen’s Plasma/Serum Circulating DNA Purification Kits (Slurry Format) provide efficient methods for the purification of fragmented free-circulating DNA from human plasma or serum. The kit is able to isolate all sizes of circulating DNA. The slurry format provides an advantage over other available kits in that it does not require extension tubes for the purification of free-circulating DNA from large sample volumes. DNA can be isolated from either fresh or frozen samples using this kit. The kit will also isolate viral and bacterial DNA from plasma/serum. Typical yields of purified free-circulating DNA will vary depending on the input sample (1-100ng/mL circulating DNA in human plasma), with more concentrated samples tending to yield more free-circulating nucleic acids. The purified, inhibitor-free plasma/serum free-circulating DNA is eluted in an elution solution that is compatible with PCR, qPCR, methylation-sensitive PCR and Southern Blot analysis.
Plasma/Serum Circulating DNA Purification Mini Kit (Slurry Format)
Norgen’s Plasma/Serum Circulating DNA Purification Mini Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating DNA from various amounts of plasma/serum ranging from 50 μL to 400 μL. Preparation time for a single sample is less than 30 minutes.
Plasma/Serum Circulating DNA Purification Midi Kit (Slurry Format)
Norgen’s Plasma/Serum Circulating DNA Purification Midi Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating DNA from various amounts of plasma/serum ranging from 400 μL to 2 mL. Preparation time for a single sample is less than 45 minutes.
Plasma/Serum Circulating DNA Purification Maxi Kit (Slurry Format)
Norgen’s Plasma/Serum Circulating DNA Purification Maxi Kit (Slurry Format) provides a fast, reliable and simple procedure for isolating circulating DNA from various amounts of plasma/serum ranging from 2 mL to 10 mL. Preparation time for a single sample is less than 45 minutes.
Figure 1 / 10
Click for expanded view
| Kit Specifications | |
| Minimum Plasma/Serum Input | 2 mL |
| Maximum Plasma/Serum Input | 10 mL |
| Size of DNA Purified | ≥ 50 bp |
| Elution Volume | 100 μL |
| Time to Complete 10 Purifications | 15-20 minutes |
| Average Yields | Variable depending on specimen |
Note: Do not exceed the recommended sample input volume of 10 mL.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Component | Cat. 50600 (50 preps) | Cat. 51200 (20 preps) | Cat. 51300 (10 preps) |
|---|---|---|---|
| Lysis Buffer D | 65 mL | 125 mL | 3 x 125 mL |
| Slurry A1 | – | 6 mL | – |
| Slurry A2 | 12 mL | – | 12 mL |
| Binding Buffer B | 20 mL | 6 mL | 20 mL |
| Binding Buffer C | – | – | 30 mL |
| Wash Solution A | 2 x 38 mL | 2 x 38 mL | 3 x 38 mL |
| Elution Buffer B | 8 mL | 8 mL | 15 mL |
| Mini Filter Spin Columns | 50 | 20 | – |
| Midi Filter Spin Columns | – | – | 10 |
| Midi Collection and Elution Tubes | – | – | 20 |
| Collection Tubes | 50 | 40 | 10 |
| Spin Columns | – | 20 | 10 |
| Elution Tubes (1.7 mL) | 50 | 40 | 10 |
| Product Insert | 1 | 1 | 1 |
HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.
Specifications
| Features | Specifications |
| Main Functions | Isolation total RNA (include miRNA) from <200mg difficult-to-extract plant samples (use low toxicity chloroform substitutes) |
| Applications | RT-PCR, qPCR, Northern hybridization, second generation sequencing, nucleic acid protection, in vitro translation |
| Purification method | Mini spin column |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Hard-to-extraction plant samples such as fruit and seed, grape leaves, tea |
| Sample amount | ≤200 mg |
| Elution volume | ≥30μl |
| Time per run | 1-24 samples within 30 minutes |
| Liquid carrying volume per column | 800µl |
| Binding yield of column | 100µg |
This kit uses glass fiber filter membrane purification technique, and only requires simple combination-washing-elution steps. The sample is lysed and homogenized in the solution containing guanidine salt, ethanol is added to provide appropriate binding conditions, and transferred to the purification column for centrifugation. Up to 100µg of RNA can be selectively bound to the membrane, pollutants are efficiently washed off after three times of washing, and finally the purified RNA is eluted by RNase Free Water.
Advantages
Kit Contents
| Contents | R416502 | D416503 |
| Purification Times | 50 Preps | 250 Preps |
| HiPure RNA Mini Columns | 50 | 250 |
| 2ml Collection Tubes | 100 | 250 |
| DNase I | 600 μl | 5 x 600 μl |
| DNase Buffer | 6 ml | 30 ml |
| Buffer PAL | 60 ml | 270 ml |
| Buffer GXP2* | 20 ml | 100 ml |
| Buffer BDP | 60 ml | 270 ml |
| Buffer RW1 | 50 ml | 250 ml |
| Buffer RW2* | 20 ml | 2 x 50 ml |
| RNase Free Water | 10 ml | 30 ml |
Storage and Stability
DNase I should be stored at -20-8°C upon arrival. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
1. When dealing with woody or uncommon samples, R4150 is recommended first. R4150 contains two polysaccharide/polyphenol lysis buffer, which is the most universal product.
2. R4151 is recommended for handling common economic crop samples for the first time. Strong lysis solution can be used to process easy-extraction samples. The amount of corn or rice leaves samples can reach up to 300mg.
3. R4165 adopts CTAB/chloroform method, which can also handle a large number of difficult-to-extraction plants, but requires contact with chloroform substitutes, which is less safe than other kits. This kit uses DNase Ⅰ to remove DNA, which is also a good choice for extracting polysaccharide/polyphenol-rich plant samples.
4. R4014 is recommended for fruit/starch plant samples, which uses improved trizol pre-treatment, single column operation and is more economical.
Select the right purification kit to get impactful results：
Ⅰ. Purchase guide of Magen kits based on sample
Ⅱ. Cross purchase guide for Magen kits vs Other brands
For any customized product or OEM service, please contact us.
HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.
K-LACGAR
SKU: 700004307
115 assays per kit
| Content: | 115 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | D-Galactose, Lactose |
| Assay Format: | Spectrophotometer |
| Detection Method: | Absorbance |
| Wavelength (nm): | 340 |
| Signal Response: | Increase |
| Linear Range: | 4 to 80 µg of D-galactose (or 8 to 160 µg of lactose) per assay |
| Limit of Detection: | 2.96 mg/L |
| Reaction Time (min): | ~ 15 min |
| Application examples: | Milk, dairy products (e.g. cream, milk / whey powder, cheese, condensed milk and yogurt), foods containing milk (e.g. dietetic foods, bakery products, baby food, chocolate, sweets and ice-cream), food additives, feed, cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Methods based on this principle have been accepted by AOAC Method 2006.06, NBN, DIN, GOST and IDF |
The Lactose/Galactose (Rapid) test kit is used for the rapid test of lactose, D-galactose and L-arabinose in food and plant products. Galactose dehydrogenase can be used the measurement and analysis of both D-galactose and L-arabinose. Suitable for the analysis of lactose in “low-lactose” or “lactose-free” samples which contain high levels of monosaccharides. The reagents provided in this kit are also suitable for use with AOAC method 2006.06 – Lactose in milk.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
View our full range of mono/disaccharide test kits.
Advantages
The Lactose/Galactose (Rapid) test kit is used for the rapid test of lactose, D-galactose and L-arabinose in food and plant products. Galactose dehydrogenase can be used the measurement and analysis of both D-galactose and L-arabinose. Suitable for the analysis of lactose in “low-lactose” or “lactose-free” samples which contain high levels of monosaccharides. The reagents provided in this kit are also suitable for use with AOAC method 2006.06 – Lactose in milk.
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : [email protected]
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map