Propargyl-PEG1-t-butyl ester

Introduction

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.

Details

Specifications

Features	Specifications
Concentration	100 mg/ml
Appearance	Suspension of black particles
Surface functional group	Si-OH, Silanol
Dispersibility	Polydisperse Amorphous
Particle size	1.5-5 μm
Preservation conditions	Room Temperature, valid for up to 2 years.It is recommended to store in 2-8°C to prevent microbial growth.
Magnetic response speed	15-30 seconds
Settling velocity	>5 minutes
High salt mediated binding	>2M guanidine isothiocyanate, DNA recovery up to 80%
Alcohol mediated binding	2M guanidine hydrochloride / isopropanol (30%), and the recovery of DNA / RNA was as high as 85%
PEG8000 mediated binding	The recovery of DNA/RNA was up to 85%
DNase/RNase	Not detected
DNA residue	<1 ppm
Recommended application	Plasmid extraction, gel DNA recovery, genomic DNA extraction and RNA extraction.

Principle

Highsalt mediated binding: in the solution containing 2-4M guanidine isothiocyanate, Magpure particles can selectively recover DNA molecules, and impurities such as protein polysaccharides are not adsorbed.

Alcohol mediated binding: in the solution containing guanidine salt and alcohol (>25%), Magpure particles can selectively recover DNA/RNA molecules, and proteins and other impurities are not adsorbed.

After biological samples are treated with digestive solution or lysis Buffer, DNA/RNA is released from cells, organelles and protein complexes (ribosomes and nucleosomes) into reagents. After Magpure particles and binding solution are added, DNA/RNA is adsorbed to the surface of Magpure particles to form DNA/RNA bead complex. Under the action of the magnetic field, the magnetic beads are separated and collected, and the impurities such as protein are removed with the waste liquid. After two or three steps of further cleaning, the DNA/RNA magnetic bead complex is resuspended in sterilized water or TE buffer, and the DNA/RNA falls off from the surface of the magnetic beads, so as to achieve the purpose of purification.

Ordering information

CAT.No.	Product Name	Package
C14100	MagPure Particles	100 ml
C14101	MagPure Particles	400 ml
C14102	MagPure Particles	3 x 400 ml
C14103	MagPure Particles	10 x 400 ml

Purchase Guide

Features	MagPure Particles	MagPure Particles N	MagPure Particles G	MagPure Particles F	MagBind Particles
Cat.No.	C1410	C1411	C1412	C1414	C1413
Concentration	100mg/ml	70mg/ml	40mg/ml	50mg/ml	10mg/ml
Form	Amorphous and Porous	Amorphous and Porous	Porous	Amorphous	Nonporous
Surface function	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	COOH, Carboxyl Beads
Dispersion	Polydisperse	Polydisperse	Monodisperse	Monodisperse	Monodisperse
Particle Size	1.5-5μm	0.2-2μm	1-1.5μm	0.2-1.5μm	0.8-1μm
Color	Black	Yellowish Brown	Dark Brown	Dark Brown	Yellowish Brown
Magnetic response	15-30s	~60s	~30s	20s	120s
Settling Time (1ml)	>5min	>10min	>3min	>3min	>2h
Usage (0.2ml Sample)	20μl	20μl	20-30μl	20-30μl	20-30μl
DNA Recover Rate (only 4M GITC)	>80%	>80%	>80%	>80%	0
DNA Recover Rate (10% PEG8000/NaCl)	>85%	>85%	>85%	>85%	>90%
Recommended Use	gDNA/RNA Isolation from Blood, Tissue, Plant, Swab, Spots, Stool, Soil and etc.Viral DNA/RNA IsolationAgarose Gel DNA Purification	DNA/RNA Isolation from low nucleic acid content samplesPlasmid IsolationDNA/RNA Clean Up	Circulating DNA IsolationViral Nucleic acid IsolationgDNA Isolation FFPE DNA/RNA Isolation	Plasmid extractiongel DNA recoverygenomicDNA/RNA extraction viral nucleic acid extractionCirculating DNA extraction	DNA/RNA Clean Up and concentrationDNA/RNA Isolation from low nucleic acid content samplesResearch immuno assays

• The MagPure magnetic-particle technology combines the speed and efficiency of silica-based DNA purification with the convenient handling of magnetic particles. DNA binds to the silica surface of the magnetic particles in the presence of a chaotropic salt. DNA bound to the particles is then efficiently washed, considerably improving the purity of DNA. High-quality DNA is eluted. The automated purification procedure completely removes enzymes, nucleotides, and other contaminants and inhibitors. Purified DNA is suitable for direct use in downstream applications, such as sequencing and microarray analysis.

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.

Description 

AccuBand™ 100 bp+3K DNA Ladder II is composed of 14 individual DNA fragments, presenting 3k, 2k, 1.5k, 1.2k, 1k, 900, 800, 700 600, 500, 400, 300, 200 and 100 bp sharp bands respectively. This product contains 2 enhanced bands (1k and 500 bp) for easy band identification. AccuBand™ 100 bp+3K DNA Ladder II is ready-to-use, containing loading buffer with dual color tracking dyes (orange G and Xylene cyanol FF). AccuBand™ 100 bp+3K DNA Ladder II provides a sufficient amount of DNA for clear observation of all DNA bands ranging from 100 bp to 3 kb, either in agarose gel or in polyacrylamide gel electrophoresis.

Features

• Sharp bands
• Suitable for polyacrylamide gel electrophoresis
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.

Range 

100 ~ 3,000 bp 

Concentration 

54.4 µg/ 500 µl 

Recommended loading volume 

5 µl/ well

Storage

Room temperature for 6 months
4°C for 12 months 
-20°C for 36 months 

Description 

The ExcelDye™ 6× DNA Loading Dye (Tri-Color) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains three dyes (Xylene cyanol FF, Bromophenol blue, Orange G) for tracking the DNA migration. The Xylene cyanol FF, Bromophenol blue and Orange G migrate at approximately 800 bp, 150 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp, 500 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease. 

Composition 

• 0.03% Xylene cyanol FF 
• 0.03% Bromophenol blue
• 0.15% Orange G 
• 10 mM Tris-HCl (pH 8.0) 
• 60% glycerol 
• 60 mM EDTA

Storage 

4°C for 12 months
-20°C for 36 months

The ExcelDye™ 6× DNA Loading Dye (Tri-Color) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains three dyes (Xylene cyanol FF, Bromophenol blue, Orange G) for tracking the DNA migration. The Xylene cyanol FF, Bromophenol blue and Orange G migrate at approximately 800 bp, 150 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp, 500 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.