Propargyl-PEG6-amine is a crosslinker with a hydrophilic PEG spacer which can increase the hydrophilicity of the molecule in aqueous environment. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group can react with azide-bearing compounds or biomolecules via copper catalyzed azide-alkyne Click Chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG6-amine is a crosslinker with a hydrophilic PEG spacer which can increase the hydrophilicity of the molecule in aqueous environment. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group can react with azide-bearing compounds or biomolecules via copper catalyzed azide-alkyne Click Chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Sample type purification kit guide
The 16S V3-V5 Library Preparation Kit for Illumina consists of the reagents and components required for library preparation of the 16S V3-V4 amplicon libraries to be used for next-generation sequencing on Illumina platforms. All molecular reagents including primers, enzyme mixes, indexes, and buffers are provided. Instructions for PCR clean up with the AMPure XP Magnetic Beads (supplied by customer) are also included for rapid purification of nucleic acid products generated at two steps of the workflow. The library prep workflow could be used for purified DNA inputs from different sources including stool, soil, water, saliva, plant, urine, skin swab, vaginal swab, cheek swab, nasal swab, plasma/serum, tongue swab, gum swab, and others.
The 16S V3-V5 Library Preparation Kit for Illumina has a streamlined procedure that reduces the handling time such that the library prep procedure can be completed in approximately 4 hours (see diagram below). Input DNA is first subjected to targeted PCR to amplify the V3-V4 region of the DNA encoding 16S rRNA. The post-PCR reaction is then cleaned up using AMPure XP beads. Dual index primers are then added using a limited-cycle PCR. The indexed amplicons flanked by 5′ and 3′ barcoded adaptors are then cleaned using AMPure XP beads. The libraries are then ready for quantification, pooling and sequencing.
Figure 1 / 3
Click for expanded view
| Minimum amount of starting material: | 2.5 µL of DNA (5 ng/µL) |
| Time to complete library preparation: | 4 hours |
Storage Conditions and Product Stability
Norgen’s 16S V3-V5Library Prep Kit for Illumina is shipped as one kit box (for the 24 prep kit) or two sub-component kits (for the 96 prep kit). All kits should be stored at -20°C upon arrival.
All kit components should remain stable for at least 1 year when stored at the specified storage conditions.
| Step | Component | Cat. 70500 (24 preps) | Cat. 70510, 70520, 70530, 70540 (96 preps) |
|---|---|---|---|
| Amplicon PCR (PCR 1) | MGX Master Mix | 330 µL | 1,320 µL |
| 16S V3-V5 Primer Mix | 70 µL | 280 µL | |
| Index PCR (PCR 2) | Indexing Master Mix | 660 µL | 2 x 1,320 µL |
| N7xx Index Primer | 50 µL | 50 µL | |
| S5xx Index Primer | 70 µL | 70 µL | |
| PCR Clean-Up | Resuspension Buffer | 2 x 1,250 µL | 2 x 5,000 µL |
| Nuclease-free water | 1,250 µL | 1 x 6,000 µL |
These kits allow for the isolation of DNA from the blood of various species, including humans and will recover genomic DNA, mitochondrial DNA, viral DNA and bacterial DNA. The purified DNA is of excellent quality and yield and completely compatible with any downstream application including PCR, qPCR and genotyping.
Blood DNA Isolation Mini Kit
Norgen’s Blood DNA Isolation Mini Kit is designed for the rapid preparation of DNA from up to 200 µL of whole blood using a rapid spin column protocol. Preparation time for a single sample is less than 30 minutes and each kit contains sufficient materials for 50 preparations.
Blood DNA Isolation Midi Kit
Norgen’s Blood DNA Isolation Kit is designed for the rapid spin column preparation of DNA from 0.3 to 2 mL volumes of whole blood. Preparation time for a single sample is less than 30 minutes, and each kit contains sufficient materials for 20 preparations.
Blood DNA Isolation Maxi Kit
This kit is designed for the rapid preparation of DNA from 3 mL up to 10 mL of whole blood. Preparation time for a single sample is less than 30 minutes.
Blood DNA Isolation 96-Well Kit (High Throughput)
This kit provides a rapid method for the high-throughput isolation of DNA from up to 200 µL of whole blood. Fast and easy processing using either a vacuum manifold or centrifugation.
Blood DNA Isolation Kit (Magnetic Bead System)
Norgen’s Blood DNA Isolation Kit (Magnetic Bead System) is designed for the rapid preparation of genomic DNA from up to 200 µL of whole blood from various species, including human. Purification is based on magnetic beads as the separation matrix. Norgen’s magnetic beads bind DNA under optimized salt concentrations and releases the bound DNA under low salt and slightly alkali conditions. The genomic DNA is preferentially purified from other cellular proteinaceous components. Typical yields of genomic DNA will vary depending on the cell density of the blood sample. The purified genomic DNA is fully digestible with all restriction enzymes tested, and is completely compatible with downstream applications including real-time PCR, NGS and microarray analysis.
Blood DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)
96-well format for high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.
Figure 1 / 19
Click for expanded view
| Kit Specifications | |
| Maximum Blood Input | 200 μL |
| Column Binding Capacity | > 50 μL |
| Average Yield (200 μL of blood) | 2-8 μg* |
| Time to Complete 96 Purifications | 45 minutes |
*Yield will vary depending on the type of blood processed
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 1 year after the date of shipment when stored at room temperature.
| Component | Cat. 46300 (50 preps) | Cat. 46380 (100 preps) | Cat. 51400 (20 preps) | Cat. 31200 (12 preps) | Cat. 46350 (192 preps) | Cat. 59800 (50 preps) | Cat. 62600 (192 preps) |
|---|---|---|---|---|---|---|---|
| Lysis Buffer B | 20 mL | 2 x 20 mL | 2 x 40 mL | 2 x 110 mL | 2 x 40 mL | 20 mL | 1 x 40 mL 1 x 20 mL |
| Solution WN | 18 mL | 2 x 18 mL | 55 mL | 55 mL | 55 mL | 18 mL | 55 mL |
| Wash Solution A | 18 mL | 2 x 18 mL | 2 x 38 mL | 2 x 38 mL | 2 x 38 mL | – | – |
| Elution Buffer B | 30 mL | 2 x 30 mL | 30 mL | 30 mL | 2 x 30 mL | 15 mL | 1 x 30 mL 1 x 15 mL |
| Proteinase K in Storage Buffer | 1.2 mL | 2 x 1.2 mL | 4.4 mL | 8 mL | 4.5 mL | 1.2 mL | 4 mL |
| Magnetic Bead Suspension | – | – | – | – | – | 2 x 1.1 mL | 8.5 mL |
| Maxi Spin Columns | – | – | – | 12 | – | – | – |
| Mini Spin Columns | 50 | 100 | – | – | – | – | – |
| Midi Spin Columns | – | – | 20 | – | – | – | – |
| 96-Well Plate | – | – | – | – | 2 | – | 2 |
| Adhesive Tape | – | – | – | – | 4 | – | 2 |
| Collection Tubes | 50 | 100 | 20 | 12 | – | – | – |
| 96-Well Collection Plate | – | – | – | – | 2 | – | – |
| Elution Tubes | 50 | 100 | 20 | 12 | – | 50 | – |
| 96-Well Elution Plate | – | – | – | – | 2 | – | 2 |
| Product Insert | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
IST-114 PeelASeal Foil SuperTM Heat Sealing Film
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : [email protected]
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map