Bis-propargyl-PEG18

Overview

• Isolate all sizes of circulating and exosomal RNA, including microRNA
• Isolate all sizes of circulating DNA from plasma and serum samples
• Isolate viral and bacterial DNA and RNA
• Versatile plasma and serum input volumes (10 µL – 200 µL)
• No phenol extractions
• Bind and elute all RNA irrespective of size or GC content, without bias
• Concentrate circulating RNA, exosomal RNA and cell-free circulating DNA into a flexible elution volume ranging from 10 µL to 25 µL
• Isolate inhibitor-free nucleic acids
• Purify high-quality RNA and DNA in 30 minutes
• Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services
• Purification is based on spin column chromatography that uses Norgen’s proprietary resin separation matrix

Norgen’s Plasma/Serum RNA/DNA Purification Mini Kit provides a fast, reliable, reproducible and simple procedure for the sequential isolation of circulating RNA, exosomal RNA and Cell-Free Circulating DNA (cfc) from the same Plasma/Serum sample. It can sequentially isolated RNA and DNA from small plasma/serum input ranging from 10 µL to 200 µL. The kit is designed to isolate all sizes of circulating RNA, including microRNA, all sizes of exosomal RNA as well as all sizes of cfc-DNA from fresh or frozen plasma or serum samples. Norgen’s Plasma/Serum RNA Purification Kit provides a clear advantage over other available kits in that it does not require Phenol/Chloroform or any Protease treatments for the isolation of plasma/serum RNA or DNA . RNA and DNA can be eluted into a flexible elution volume ranging from 10 µL to 25 µL. Purified RNA can be used in a number of sensitive downstream applications including reverse transcription qPCR, reverse transcription PCR, NGS, Northern blotting, RNase protection and primer extension, and expression array assays. Purified DNA can be used in a number of sensitive downstream applications including PCR, qPCR, methylation-sensitive PCR and Southern Blot analysis.

Background

Typical yields of free-circulating, exosomal RNA and cfc-DNA vary depending on the input sample, as the amount of RNA and/or DNA present in plasma and serum will depend upon the health status of the individual.  Normally, the RNA/DNA yield from plasma or serum is highly variable (range from 1 to 100 ng/mL). Variability is also observed between samples collected from the same donor at different times during the day. This kit is suitable for the isolation of RNA/DNA from serum or plasma prepared from blood collected on either EDTA or Citrate. Plasma samples prepared from blood collected on heparin should not be used as heparin can significantly interfere with many downstream applications such as RT-PCR.

Details

Supporting Data

Figure 1 / 7

Previous

Next

Click for expanded view

Kit Specifications
Minimum Plasma/Serum Input Volume	10 μL
Maximum Plasma/Serum Input Volume	200 μL
Size of RNA Purified	All sizes including small RNA (<200 nt)
Size of DNA Purified	≥ 50 bp
Minimum Elution Volume	10 μL
Maximum Elution Volume	25 μL
Time to Complete 10 Purifications	15-20 minutes
Average Yield	Variable depending on specimen

 Note: Do not exceed the recommended sample input volume of 200 µL.

Storage Conditions and Product Stability

All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.

Component	Cat. 55200 (50 preps)
Lysis Buffer A	30 mL
Wash Solution A	38 mL
Solution WN	18 mL
Elution Solution A	6 mL
Elution Buffer B	8 mL
Micro Spin Columns	50
Micro-Elute RNA Spin Columns	50
Collection Tube	100
Elution Tubes (1.7 mL)	100
Product Insert	1

Description 

Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses. 

Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems. 

Key Features

• User-friendly gel cassette:
  • Numbered and framed wells for sample loading
  • Labeled warning sign and green tape as reminder
• Enhanced gel performance: 
  • Enhanced gel electrophoresis speed 
  • Better band separation, equivalent to commercially 4-20% TG gels  
  • Stable for shipping at ambient temperature
• Easy compatibility: 
  • Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
  • Compatible with most popular protein electrophoresis systems 

Storage and stability

Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.

Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis. 

Keep Q-PAGE™ Precast Gels flat during storage.

Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.

Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.

Description 

The DM4160 FluoroBand™ XL 25 kb Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM4160 is composed of 14 individual DNA fragments: 25k, 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank. 

Features

• Sharp bands
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months
• Directly observed by UV or blue light— premixed with high sensitive DNA fluorescent dye

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.

Range 

250 ~ 25,000 bp 

Concentration 

51.6 µg/ 500 µl 

Recommended loading volume 

5 µl/ well

Storage

Protected from light 
Room temperature for 6 months
4°C for 12 months 
-20°C for 24 months 

The DM4160 FluoroBand™ XL 25 kb Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM4160 is composed of 14 individual DNA fragments: 25k, 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.