Propargyl-PEG4-methylamine is a PEG linker that can be react with azide compounds in copper catalyzed azide-alkyne Click Chemistry reactions. The methylamine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The PEG spacer increases hydrophilicity of the linker in aqueous environment. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG4-methylamine is a PEG linker that can be react with azide compounds in copper catalyzed azide-alkyne Click Chemistry reactions. The methylamine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The PEG spacer increases hydrophilicity of the linker in aqueous environment. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
K-RINTDF
SKU: 700004335
100 assays per kit
| Content: | 100 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | Dietary Fiber |
| Assay Format: | Enzymatic |
| Detection Method: | Gravimetric/HPLC |
| Signal Response: | Increase |
| Limit of Detection: | 0.5 g/100 g |
| Total Assay Time: | ~ 3 h work (over 1-2 days) |
| Application examples: | Food ingredients, food products and other materials. |
| Method recognition: | AACC Method 32-60.01, AOAC Method 2022.01, AOAC Method 2017.16, ICC Standard Method No. 185 and CODEX Method Type I |
The Rapid Integrated Total Dietary Fiber Assay Kit method is validated under collaborative study (AACC Method 32-60.01, AOAC Method 2022.01, AOAC Method 2017.16, ICC Standard No. 185) and is recognized as a Type I Method by CODEX Alimentarius. The K-RINTDF method is the recommended one for the measurement of total dietary fiber in all foods that may or may not contain resistant starch. This method is updated to be more consistent with in vivo conditions in the human small intestine, i.e. a 4 h incubation time. Under these conditions more accurate measurement of resistant starch is obtained, including phosphate cross-liked starch (RS4). Use of higher enzyme concentrations ensures that resistant maltodextrins produced from non-resistant starch under the incubation conditions of the Integrated Total Dietary Fiber procedure (AOAC Methods 2009.01 and 2011.25) are no longer produced.
In this improved, rapid method, the incubation time with PAA + AMG is reduced to 4 h and the levels of both PAA and AMG are increased to ensure that resistant starch levels obtained with a set of control samples are consistent with ileostomy data. Under these conditions, the DF values obtained for most samples are the same as those obtained with AOAC Methods 2009.01 and 2011.25.
The dietary fiber fractions that are measured with this method are:
1. High Molecular Weight Dietary Fiber (HMWDF) including Insoluble Dietary Fiber (IDF) and High Molecular Weight Soluble Dietary Fiber (SDFP; soluble dietary fiber which is precipitated in the presence of 78% aqueous ethanol), and
2. Low Molecular Weight Soluble Dietary Fiber (SDFS; water soluble dietary fiber that is soluble in the presence of 78% aqueous ethanol).
Alternatively, IDF, SDFP and SDFS can be measured separately.
The enzymes used in this method are high purity and effectively devoid of contaminating enzymes active on other dietary fiber components such as β-glucan, pectin and arabinoxylan. They are supplied as freeze-dried powders; allowing the use of glycerol as an internal standard in the method.
See our full range of dietary fiber assay kits.
View Dietary Fiber Measurement Guide – Which Method for which sample?
* See McCleary, B. V., Sloane, N & Draga, A. (2015). Determination of total dietary fibre and available carbohydrates: a rapid integrated procedure that simulates in vivo digestion. Starch/Starke, 66, 1-24.
Validation of Methods
Advantages
The Rapid Integrated Total Dietary Fiber Assay Kit method is validated under collaborative study (AACC Method 32-60.01, AOAC Method 2022.01, AOAC Method 2017.16, ICC Standard No. 185) and is recognized as a Type I Method by CODEX Alimentarius. The K-RINTDF method is the recommended one for the measurement of total dietary fiber in all foods that may or may not contain resistant starch. This method is updated to be more consistent with in vivo conditions in the human small intestine, i.e. a 4 h incubation time. Under these conditions more accurate measurement of resistant starch is obtained, including phosphate cross-liked starch (RS4). Use of higher enzyme concentrations ensures that resistant maltodextrins produced from non-resistant starch under the incubation conditions of the Integrated Total Dietary Fiber procedure (AOAC Methods 2009.01 and 2011.25) are no longer produced.
This product provides a reliable solution for DNA isolation from yeast samples. Total DNA can be purified from yeast (<5x 107) without phenol or chloroform. The whole extraction can be finished within 60 minutes. Purified DNA can be directly used for PCR, Southern blot, ect.
Specifications
| Features | Specifications |
| Main Functions | Isolation total DNA from yeast cultures |
| Applications | PCR, southern blot and enzyme digestion, etc. |
| Purification method | Mini spin column |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Yeast culture |
| Sample amount | Bacterial culture: 1-1.5 ml |
| Elution volume | ≥30μl |
| Time per run | ≤60 minutes |
| Liquid carrying volume per column | 800μl |
| Binding yield of column | 100μg |
This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris,pH9.0, 0.5mm EDTA).
Kit Contents
| Contents | D314702 | D314703 |
| Purification Times | 50 Preps | 250 Preps |
| Hipure DNA Mini Columns I | 50 | 250 |
| 2ml Collection Tubes | 50 | 250 |
| Glass Beads (0.4~0.6mm) | 20 g | 90 g |
| Buffer SE | 30 ml | 150 ml |
| Lyticase | 1.8 ml | 5 x 1.8 ml |
| Buffer ATL | 30 ml | 150 ml |
| ReagentDX | 500 μl | 1500 μl |
| Buffer DL | 30 ml | 150 ml |
| Buffer GW1* | 13 ml | 66 ml |
| Buffer GW2* | 20 ml | 2 x 50 ml |
| Proteinase K | 12 mg | 60 mg |
| Protease Dissolve Buffer | 1.8 ml | 5 ml |
| Buffer AE | 15 ml | 30 ml |
Storage and Stability
Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions. Buffer ATL may precipitate at low temperature. Dissolve it by 37℃ water bath.
This product provides a reliable solution for DNA isolation from yeast samples. Total DNA can be purified from yeast (
Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.
The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.
Specifications
| Features | Specifications |
| Recommended application | Plasmid Medium Yield preparation |
| Preservation conditions | Room temperature |
| Stability | Up to 4 years |
| Filter membrane | High quality glass fiber filter GF/B, 8 layers |
| Membrane aperture | 1.0 μm |
| Maximum binding yield of plasmid | 250 μg |
| Maximum yield of alcohol mediated Binding | 1 mg |
| Plasmid Yields | Up to 0.25mg |
| Single liquid carrying capacity of column | 4 ml |
| Minimum elution volume | 500 μl |
| Withstand centrifugal force | 5,000 x g |
| Centrifuge | Lowspeed centrifuge for 15ml centrifuge tubes, >3000 x g, swing-out Rotor, or Fixed Angle Rotor |
Adsorption Mechanism
Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silica gel membrane, while other pollutants, mainly proteins, are removed by membrane washing.
Ordering information
| CAT.No. | Product Name | Package |
| C13121 | HiPure DNA Midi Column III (8 x GF/B)with 15ml Collection Tubes | 100/Bag |
| Item No. | Product Name | Membrane type/number of layers | Collection tubes | Plasmid DNA binding capacity (Physical adsorption) | gDNA/RNA binding capacity (Alcohol-mediated adsorption) | Minimum Elution volume | Liquid volume capacity |
| C13010 | HiPure DNA Nano Column | 2 layers GF/F | 2ml without cap | 5μg | 20μg | 10μl | 700μl |
| C13011 | HiPure DNA Micro Column | 3 layers GF/F | 2ml without cap | 10μg | 50μg | 15μl | 700μl |
| C13100 | HiPure DNA Mini Column I | 2 layers GF/B | 2ml without cap | 15μg | 100μg | 30μl | 700μl |
| C13110 | HiPure DNA Mini Column II | 4 layers GF/B | 2ml without cap | 35μg | 200μg | 50μl | 800μl |
| C13111 | HiPure RNA Mini Column | 3 layers GF/B | 2ml without cap | 30μg | 200μg | 30μl | 800μl |
| C13112 | HiPure Viral Mini Column | 3 layers GF/F | 2ml without cap | 30μg | 200μg | 30μl | 800μl |
| C13113 | HiPure CFDNA Mini Column | 3 layers GF/F,1 layer GF/B | 2ml without cap | 30μg | 200μg | 30μl | 800μl |
| C13120 | HiPure DNA Midi Column | 4 layers GF/B | 15ml Centrifuge tube | 125μg | 1mg | 500μl | 4ml |
| C13121 | HiPure DNA Midi Column III | 8 layers GF/B | 15ml Centrifuge tube | 250μg | 1mg | 500μl | 4ml |
| C13122 | HiPure DNA Maxi Column | 4 layers GF/B | 50ml Centrifuge tube | 500μg | 5mg | 1000μl | 20ml |
| C13123 | HiPure DNA Maxi Column III | 8 layers GF/B | 50ml Centrifuge tube | 1mg | 5mg | 1000μl | 20ml |
| C13124 | HiPure DNA Maxi Column C | 8 layers GF/B | 50ml high speed Centrifuge tube | 1mg | 5mg | 700μl | 12ml |
| C13130 | HiPure DNA Plate | 2 layers GF/F | 1.6ml Plate | 30μg | 100μg | 80μl | 900μl |
| C13131 | HiPure gDNA Plate | 2 layers GF/B | 1.6ml Plate | 30μg | 100μg | 80μl | 900μl |
Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.
Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.
