t-Boc-N-Amido-PEG8-propargyl

Designed for those labs wishing to separate magnetic beads into rings.

The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

SKU #

RLE500

Features

• SBS/ SLAS footprint
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Integrated bracket to help keep microplate in place and flat
• Made in USA 
• For Research use only

Compatibility

• Full- skirt PCR plates
• 1/2- skirt PCR plates 
• Un-skirted PCR plates
• Any magnetic beads
• Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volumes

Maximum  – 150 µL 

Minimum  – 5 µL 

Designed for those labs wishing to separate magnetic beads into rings.

The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

Description

Attogene’s Lead Rapid Lab Lateral Flow Kit can be used for the screening of Lead in water and food samples at greater than or equal to 10 ppb in a laboratory setting.  Unlike the field-based kit, the lab kit is intended for a more technical end user who will be evaluating samples in a laboratory setting.

Lead contamination is a serious worldwide environmental problem. As it is difficult to detoxify by chemical or biological methods, gradual Lead ion accumulation in the nervous and cardiovascular systems of the human body can subsequently cause serious diseases.   Long-term health consequences of drinking Lead-contaminated food and water include brain, heart, kidney, lungs  and immune system problems for adults, and the physical and mental development delays in infants and children.  Attogene’s Lead Lateral Flow test gives results conforming of 10ppb or greater in 5-15 minutes.

This is a revolutionary product designed to make Lead testing in easy and affordable.  This fast screening test kit contains 10 tests with everything needed for accurate results of unsafe lead levels. With reliable results in only 10 minutes, this test kit clearly gives results confirming Lead in water and conforming to the EPA guideline of 15 ppb (µg/L).

Sample Collection:

1. Take a first-draw sample

Immediately after opening a faucet or valve, collect a 250 mL sample. This sample should be from each tap used for consumption.

2. Take a flush sample

If first-draw sample results show elevated lead levels of 5 ppb or higher, collect a flush sample. To do this, ensure water has not been used for between 8 to 18 hours, then collect the sample at 30 seconds.

3. Take sequential samples

If you want to test a lead service line, collect 8 to 10 sequential samples, depending on how far the line is from the tap.

---

Standards and Regulations and recommendations for Lead

• EPA: Drinking Water: 15ppb
• FDA: Juice: 50ppb
• EPA: Residential Soil: 400 ppm (play areas), 1200 ppm (non-play areas)
• CPSC: Paint: 90ppm
• FDA: Bottled drinking water: 5ppb

High Blood lead levels (i.e., greater than 700ppb) can cause serious health effects, including seizure, coma, and death.  Blood levels as low as 100ppb have been associated with adverse effects on cognitive development, growth, and behavior among children aged 1-5 years.

Screening of Lead in water samples at 5-10 ppb
Format: 10 tests (5 tests/5 controls)
Run Time: 15 Minutes

Overview

Standard profile polypropylene, universal 96 well non-skirted plate, designed for use on standard thermal cyclers.

• 0.1 ml wells
• Made using Polypropylene
• Cut corner A12
• Working volume: <100 µl, total well capacity: 200 µl
• Universal 96 well non-skirted plate
• Designed for use on standard thermal cyclers

Standard profile polypropylene, universal 96 well non-skirted plate, designed for use on standard thermal cyclers.