N-(Propargyl-PEG4)-biocytin is a biotin PEG reagent that is reactive with azide containing molecule via click chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
N-(Propargyl-PEG4)-biocytin is a biotin PEG reagent that is reactive with azide containing molecule via click chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
N-(Propargyl-PEG4)-biocytin is a biotin PEG reagent that is reactive with azide containing molecule via click chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
These kits provide a rapid method for the isolation and purification of total leukocyte (white blood cell) RNA from mammalian blood samples. These kits are supplied with an RBC (red blood cell) Lysis Buffer for selective removal of red blood cells and fractionation of leukocytes by centrifugation. Isolation of leukocyte RNA results in improved expression profiling and other downstream applications by removing the masking effects of some RNAs which are very abundant in whole blood, such as globin mRNAs. These kits are able to isolate total leukocyte RNA, including both large mRNA and all small RNA species containing microRNA (miRNA) and small silencing RNA (siRNA). The purified RNA is of the highest quality and can be used in a number of downstream applications.
Leukocyte RNA Purification Kit (Spin Column)
This kit provides a rapid method for the isolation and purification of total leukocyte RNA from mammalian blood samples in 40 minutes. Allowable blood input ranges from 10 μL to 2 mL or 3 x 106 Leukocytes
Leukocyte RNA Purification Plus Kit (Plus)
Norgen’s Leukocyte RNA Purification Plus Kit provides a rapid method for the isolation and purification of total leukocyte (white blood cell) RNA from up to 3 mL of mammalian blood samples. Complete 10 purifications in as little as 40 minutes.
Leukocyte RNA Purification 96-Well Kit (High Throughput)
Purification is based on 96-well column chromatography using Norgen’s proprietary resin as the separation matrix. Purification can be performed using either a vacuum manifold or centrifugation. Norgen’s kit allows for the isolation of total leukocyte RNA, including all small RNA species. The purified RNA is of the highest quality and can be used in a number of downstream applications including real time PCR, reverse transcription PCR, northern blotting, RNase protection and primer extension, and expression array assays. Allowable blood input ranges from 10 μL to 1 mL or 1.5 x 106 Leukocytes.
Figure 1 / 6
Click for expanded view
| Kit Specifications | |
| Maximum Column Binding Capacity | Up to 50 μg RNA |
| Maximum Loading Volume | 650 μL |
| Size of RNA Purified | All sizes, including small RNA <200 nt |
| Minimum Blood Input | 10 μL |
| Maximum Blood Input | 2 mL or 3 x 106 leukocytes |
| Time to Complete 10 Purifications | 40 minutes |
| Input Type | Blood from Human, Hamster, Mouse, Rabbit, and Rat |
| Average Yield Human Blood (500 μL) Hamster Blood (100 μL) | 1.5 μg 2.5 μg |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. The RBC Lysis Buffer should be stored at 4°C upon arrival.
| Component | Cat. 21200 (50 preps) | Cat. 21250 (50 preps) | Cat. 37800 (2 x 96 preps) |
|---|---|---|---|
| RBC Lysis Buffer | 2 x 100 mL | 2 x 1 L | 2 x 90 mL |
| Buffer RL | 30 mL | 30 mL | – |
| Binding Solution | – | – | 2 x 40 mL |
| Wash Solution A | 38 mL | 38 mL | – |
| Wash Solution | – | – | 2 x 30 mL |
| Elution Solution A | 6 mL | 6 mL | – |
| Elution Solution | – | – | 2 x 20 mL |
| Enzyme Incubation Buffer | – | 6 mL | 1 |
| DNase I | – | 1 Vial | – |
| Mini Spin Columns | 50 | – | – |
| Lysate Homogenization Column | – | 50 | – |
| Single Cell RNA Column | – | 50 | – |
| RBC Lysis 96-Well Plate | – | – | 2 |
| 96-Well Filter Plate | – | – | 2 |
| Adhesive Tape | – | – | 4 |
| Collection Tubes | 50 | 100 | – |
| 96-Well Collection Plate | – | – | 2 |
| Elution Tubes (1.7 mL) | 50 | 50 | – |
| 96-Well Elution Plate | – | – | 2 |
| Product Insert | 1 | 1 | 1 |
The NGS FFPE DNA Library Prep Kit (illumina and MGI Platforms) was developed for the construction of high quality FFPE DNA libraries using 10 ng to 400 ng of input DNA isolated from formalin-fixed, paraffin-embedded (FFPE) samples. The DNA damage caused by fixation makes it difficult to construct high quality libraries. Our kit has been optimized to repair damaged DNA in the reactions. Multiplexing of the NGS FFPE DNA Library is possible.
NGS FFPE DNA Library Prep Kit Workflow
FFPE samples are a great resource for biomedical research. However, the methods for fixation and condition of storage significantly damage the DNA in the samples. Thus, the extraction of high quality DNA from FFPE samples is often a challenge. Low yield and low quality of FFPE DNA usually are common because of the limited tissue material and the DNA degradation.
As a result, it is usually difficult to construct high quality NGS libraries from low amount and low quality of FFPE DNA. In order to address this issue, we have developed the NGS FFPE DNA Library Prep Kit to make high quality libraries from the low input of FFPE DNA samples.
Three index types are available for the NGS FFPE DNA Library Prep Kit of the illumina platform:
Non-index (Cat.# 30035): Libraries do not have index.
Index (Cat.# 30037): Each of our index primers contains a unique barcode DNA (6 bases long) that can be used to identify individual library. Multiplexing of libraries is up to 48 samples. Index information can be downloaded here.
Unique dual index (Cat.# 30039): FFPE DNA library multiplexing is possible with 96 samples based on the unique dual indexing system. Our unique Four–Base Difference Index System allows us to make indexes that have at least 4 bases different from each other in the 8-base index sequence. Our unique dual indexing primers can effectively remove NGS errors including index hopping, de-multiplexing errors, index cross-contamination, mis-assignments etc. The unique dual index primer set includes 96 pre-mixed unique pairs of i5 and i7 index primers. Index information can be downloaded here.
Indexes are available for the MGI platform kits (Cat.# 34037).
Kit advantages:
Comparison of library conversion efficiency under the same condition. Input DNA amount is 25 ng.
Comparison of library yield under the same condition. Input DNA amount is 25 ng.
The NGS FFPE DNA Library Prep Kit (illumina and MGI Platforms) was developed for the construction of high quality FFPE DNA libraries using 10 ng to 400 ng of input DNA isolated from formalin-fixed, paraffin-embedded (FFPE) samples. The DNA damage caused by fixation makes it difficult to construct high quality libraries. Our kit has been optimized to repair damaged DNA in the reactions. Multiplexing of the NGS FFPE DNA Library is possible.
Sample type purification kit guide
The 16S V3-V4 Library Preparation Kit for Illumina consists of the reagents and components required for library preparation of the 16S V3-V4 amplicon libraries to be used for next-generation sequencing on Illumina platforms. All molecular reagents including primers, enzyme mixes, indexes, and buffers are provided. Instructions for PCR clean up with the AMPure XP Magnetic Beads (supplied by customer) are also included for rapid purification of nucleic acid products generated at two steps of the workflow. The library prep workflow could be used for purified DNA inputs from different sources including stool, soil, water, saliva, plant, urine, skin swab, vaginal swab, cheek swab, nasal swab, plasma/serum, tongue swab, gum swab, and others.
The 16S V3-V4 Library Preparation Kit for Illumina has a streamlined procedure that reduces the handling time such that the library prep procedure can be completed in approximately 4 hours (see diagram below). Input DNA is first subjected to targeted PCR to amplify the V3-V4 region of the DNA encoding 16S rRNA. The post-PCR reaction is then cleaned up using AMPure XP beads. Dual index primers are then added using a limited-cycle PCR. The indexed amplicons flanked by 5′ and 3′ barcoded adaptors are then cleaned using AMPure XP beads. The libraries are then ready for quantification, pooling and sequencing.
| Minimum amount of starting material: | 2.5 µL of DNA (5 ng/µL) |
| Time to complete library preparation: | 4 hours |
Storage Conditions and Product Stability
Norgen’s 16S V3-V4 Library Prep Kit for Illumina is shipped as one kit box (for the 24 prep kit) or two sub-component kits (for the 96 prep kit). All kits should be stored at -20°C upon arrival.
All kit components should remain stable for at least 1 year when stored at the specified storage conditions.
| Step | Component | Cat. 70400 (24 preps) | Cat. 70410, 70420, 70430, 70440 (96 preps) |
|---|---|---|---|
| Amplicon PCR (PCR 1) | MGX Master Mix | 330 µL | 1,320 µL |
| 16S V3-V4 Primer Mix | 70 µL | 280 µL | |
| Index PCR (PCR 2) | Indexing Master Mix | 660 µL | 2 x 1,320 µL |
| N7xx Index Primer | 50 µL | 50 µL | |
| S5xx Index Primer | 70 µL | 70 µL | |
| PCR Clean-Up | Resuspension Buffer | 2 x 1,250 µL | 2 x 5,000 µL |
| Nuclease-free water | 1,250 µL | 1 x 6,000 µL |
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : hej@a3p-scientific.com
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map