Introduction

The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 20µg plasmid DNA from 1.5ml bacterial culture using 96 well bind plate and 96 filterplate
Applications	Enzyme digestion, sequencing, PCR, labeling, etc.
Purification method	96 well plate
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Conventional plasmid, plasmid less than 30KB
Sample amount	1-1.5ml（x96）
Yield	1-15µg/1ml
Elution volume	≥70μl
Time per run	≤60 minutes
Liquid carrying volume per column	800µl
Binding yield of column	70µg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – it takes only 60 minutes to complete the isolation
• High yield – up to 1mg plasmid can be binded in one column
• Economy – high cost performance

Kit Contents

Contents	P100601	P100602	P100603
Purification Times	1 x 96 Preps	4 x 96 Preps	20 x 96 Preps
RNase A	5 mg	20 mg	100 mg
Buffer P1	30 ml	120 ml	600 ml
Buffer P2	30 ml	120 ml	600 ml
Buffer P3	40 ml	180 ml	800 ml
Buffer PW1	100 ml	500 ml	2 x 1000 ml
Buffer PW2	50 ml	2 x 100 ml	4 x 200 ml
Elution Buffer	150 ml	60 ml	300 ml
Lysate Clear Plate	1	4	20
HiPure DNA Plate	1	4	20
1.6 ml Collection Plate	1	4	20
0.5ml Elute Plate	1	4	20

Storage and Stability

The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

Introduction

Usages:

For the rapid detection and of coliforms and E. coli.

Principle:

Peptone and yeast extract powder provides carbon and nitrogen sources and trace elements; sodium chloride maintains osmotic equilibrium; agar as medium coagulant; dodecyl sulfate inhibit Gram-positive bacteria; chromogenic substrate were mixed occurrence of coliforms and E. coli enzyme corresponding specific reactions, hydrolysis of the substrate, the release of the color groups, in a pale yellow plates coliforms appears orange-red colonies while E.coli appears blue-green colonies.

Formulation (per liter):

Peptone 15.0g

Yeast extract powder 3.0g

Sodium chloride: 5.0g

Sodium lauryl sulfate: 0.1g

Agar: 12.0g

Mixed chromogenic substrate: 6.77g

Final pH 7.0 ± 0.2

How to use:
1. Weigh 41.9g of the product, adding , 1.0 L of distilled or deionized water, heated to boiling stir until completely dissolved, dispensing into flask, 115 autoclaved 10minutes.

2, Take 25.0g or 25.0mL of sample with sterile procedures, added to the flask containing 225.0mL of sterile phosphate buffered saline (or saline) ,shaken thoroughly homogenized with a homogenizer or a 1:10 dilution of 1min solution, diluted 1:10 and then continue to select the appropriate serial dilutions of three, the two plates inoculated with each dilution, poured dissolved by heating and cooled to about 45 medium.

3, observe the results.

Quality control:

This product appears light yellow after  pouring on plate, these strains were inoculated after 36 ± 1 18 ~ 24h culture growth in the following table.

Bacteria name            bacteria NO.       growth situation         feature

Escherichia coli          ATCC25922            good         blue-green colonies

Citrobacter              ATCC8090             good         orange-red colonies

Salmonella typhimurium   CMCC50115          good           colorless colonies

Enterococcus faecalis     ATCC29212           suppressed            —–

Storage: Store in a dark, cool and dry place, tighten the caps immediately after use. Storage period of two years.

1000mL

The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with our MSP750 MSP750R MSPU650R or MSPU650 magnet plates and is available as a discounted kit   Picture shown is SKU: MSPU650RKT for reference 

SKU #

MTP96

Features

• SBS/ SLAS footprint
• Laser labeled rows and columns for easy sample control
• Precision manufactured for more consistent results
• Works with strips and individual tubes
• Made in USA 
• For Research use only

Compatibility

• 8-strip 0.2 mL PCR Strips 
• 12-strip 0.2 mL PCR Strips 
• Individual PCR tubes
• PCR Plates (Unskirted-skirt)

The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with