endo-BCN-NHS carbonate

The TL 24 series of biological Microscope

TL 24 series biological microscope is equipped with 195 achromatic objective and large field eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, etc. It can be widely used in biology, medicine, industry, agriculture and other fields, and is an ideal instrument for medical, teaching, scientific research and other units

Details of TL24 series biological microscope

* Optical system: equipped with limited far flat field optical system, complete machine mildew prevention design and large field eyepiece, with beautiful appearance, clear imaging, broad vision, convenient operation and other characteristics, can be widely used in biology, medicine, industry, agriculture and other fields, is the ideal instrument for medical, teaching, scientific research and other units

* Observation head device: the cylinder can rotate 360 degrees, the displacement of the center of the mirror is 0.06mm; 30 tilting; the hinge double observation (the left and right systems are 2.0% different; the lens end position is 0.1mm at zero vision) and the third party connection port, pupil distance adjustment range of 55-75mm, fixed observation tube head is internal hexagon screw or select portable screw.

* Eyepiece configuration: random eyepiece WF10X / 18mm; the magnification accuracy of eyepiece shall not exceed ± 2%. There is a card slot on the eyepiece tube to lock and position the eyepiece to prevent falling. Binocular vision is adjustable, making binocular observation easier;

* Objective: Broadband coated ED-N195 pure copper achromatic objective; objective magnification accuracy not exceeding ± 5%; 4X, 10X, 40X (spring), 100X (spring, oil); objective error 10-40 Afocal 0.06mm; 40-100 Afocal 0.03mm

* Loading platform: triangular rail XY composite mechanical moving loading platform; 0.005 lateral to 5N horizontal force, corrosion resistance and wear resistance. Rectangular, size 110X120mm, stroke 7030mm, minimum read value 0.1 mm.

Specification

Specification configuration	TL24A	Binocular observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm
	TL24B	Three-eye observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm.
	TL24M	Three-eye viewing head, equipped with 5 million pixel imaging system CMOS camera
	TL24P	Three-eye viewing head, equipped with 10.1 inch integrated flat panel display
Eyepiece	Wide-angle eyepiece WF10X,field of view 18mm,optional WF16X,WF25X
Converter	Quadruple Revolving Converter
0bjective	195mm achromatic objective,4X,10X,40X,100X(oil)
Condenser	ABBE N.A.1.25Condenser with Iris Diaphragm &Filter
Stage	Double Layer Mechanical Stage,Size110mmx120mm,Moving Range :70mmx30mm
Focusing	Crude motion, micromotion and coaxial focal adjustment system with a minimum focal range of 0.02mm  Coarse and Fine Focusing
Light source	1W LED,with Rechargeable Battery,Type C USB cable
Attachments	Dust bag,Type C power cord

TL 24 series biological microscope is equipped with 195 achromatic objective and large field eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, etc. It can be widely used in biology, medicine, industry, agriculture and other fields, and is an ideal instrument for medical, teaching, scientific research and other units

Description 

The DM1160 FluoroBand™ 50 bp Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM1160 is composed of 17 individual DNA fragments: 1.5k, 1.2k, 1k, 900, 800, 700, 600, 500, 450, 400, 350, 300, 250, 200, 150, 100, and 50 bp derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or a UV light. This product contains two enhanced bands (500 bp and 200 bp) for easier reference. In addition, the low range Orange G tracking dye which mimics the migration of a 50 bp dsDNA during electrophoresis is also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank. 

Features

• Sharp bands
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months
• Directly observed by UV or blue light— premixed with high sensitive DNA fluorescent dye

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.

Range 

50 ~ 1,500 bp 

Concentration 

54 µg/ 500 µl 

Recommended loading volume 

5 µl/ well

Storage

Protected from light 
Room temperature for 6 months
4°C for 12 months 
-20°C for 24 months 

The DM1160 FluoroBand™ 50 bp Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM1160 is composed of 17 individual DNA fragments: 1.5k, 1.2k, 1k, 900, 800, 700, 600, 500, 450, 400, 350, 300, 250, 200, 150, 100, and 50 bp derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or a UV light. This product contains two enhanced bands (500 bp and 200 bp) for easier reference. In addition, the low range Orange G tracking dye which mimics the migration of a 50 bp dsDNA during electrophoresis is also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.

Overview

• Rapid spin column purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive
• Bead tubes (provided) allow for effective mechanical homogenization
• Purified DNA is of high quality and integrity and compatible with any sensitive downstream applications such as PCR, qPCR, RFLP and more

These kits provide fast and reliable procedures for the purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive. Genomic DNA is efficiently extracted from the cells by a combination of heat treatment, detergents and Bead Tubes (provided). An optional lyticase treatment allows for improved DNA yields with certain fungal and yeast species. Recovered genomic DNA is of excellent yield and purity for any downstream application including PCR, qPCR, Restriction Fragment Length Polymorphism (RFLP), Amplified Fragment Length Polymorphism (AFLP), sequencing, SNP analysis and more.

Fungi/Yeast Genomic DNA Isolation Kit (Spin Column)

This kit provides rapid spin column purification of genomic DNA from viable yeast cells, fungal spores or mycelium, and bacteria including Gram-positive. Preparation time for a single sample is less then 30 minutes, and each kit contains sufficient materials for 50 preparations.

Fungi/Yeast Genomic DNA Isolation 96-Well Kit (HT)

Norgen’s Fungi/Yeast Genomic DNA Isolation 96-Well Kit provides a fast, reliable and simple procedure for high throughput isolation of DNA from viable yeast cells, fungal spores or mycelium and Gram-positive bacteria. The purification could be performed on either a vacuum manifold or using centrifugation. Complete 96 purifications in 40 minutes.

Details

Supporting Data

Figure 1 / 6

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	50 μg
Maximum Column Loading Volume	650 μL
Maximum Amount of Starting Material: Fungi (wet weight) Yeast or Bacteria Culture	50 mg 0.5mL – 1mL
Average Yield* Pichia sp. (yeast) Botrytis cinerea ​Fusarium sp. Aspergillis niger Mucor racemosus Cladosporium cladosporioides Penicillium sp. Rhizopus oryzae Alternaria tenuissima	25 μg 32 μg 42 μg 26 μg 15 μg 12 μg 40 μg 7 μg 30 μg
Time to Complete 10 purifications	30 minutes

* Yield will vary depending on the type of sample processed

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.

Component	Cat. 27300 (50 preps)	Cat. 27350 (192 preps)
Lysis Buffer L	30 mL	2 x 60 mL
Resuspension Solution A	20 mL	60 mL
Solution BX	28 mL	2 x 28 mL
Wash Solution A	18 mL	2 x 38 mL
Elution Buffer B	15 mL	30 mL
Bead Tubes	50	200
Spin Columns	50	–
Collection Tubes	50	–
96-Well Plate	–	2
96-Well Collection Plate	–	2
Adhesive Tape	–	4
Elution Tubes (1.7 mL)	50	–
96-Well Elution Plate	–	2
Product Insert	1	1