endo-BCN-PEG2-PFP ester is a click chemistry active ester. The PFP esters have similar applications as the NHS esters, but are more stable in aqueous solution. They can be used to label the primary amines (-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules. The BCN group can react with azide-tagged biomolecules. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
endo-BCN-PEG2-PFP ester is a click chemistry active ester. The PFP esters have similar applications as the NHS esters, but are more stable in aqueous solution. They can be used to label the primary amines (-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules. The BCN group can react with azide-tagged biomolecules. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads
MSRLV08
Maximum – .2 mL
Minimum – 5 µL
Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads
30nm Colloidal Gold for Lateral Flow is a highly stable and uniform 30 nm gold nanoparticles can be supplied in a range from 1 OD to 100 OD. The quality and performance of a conjugate is critical to successful lateral flow test manufacturing. Our products are made in Austin TX and produced in a state-of-the-art manufacturing facility that enable rapid turnaround times while ensuring batch to batch consistency and reliability.
Bulk pricing and manufacturing supply contracts available.
Functionally Tested in Lateral Flow
Specifications 1OD 30nm Gold (1L)
| Number of particles/mL | 1.3-2 x 1011 |
| Gold Concentration (mg/mL) | 4.2-4.7 x 10-2 |
| Molar Concentration (moles/liter) | 2.2-3.3 x 10-10 |
| Particle Diameter | 30 nm /-1.5 |
Number of particles/mL 1.3-2 x 1011
• Gold Concentration (mg/mL) 4.2-4.7 x 10-2
• Molar Concentration (moles/liter) 2.2-3.3 x 10-10
• Particle Diameter 30 nm /-1.5
Opentrons OT-2 8-Channel Electronic Pipettes automate liquid handling and pipetting for most daily wetlab applications. Best for medium- to high-throughput workflows.
Opentrons OT-2 8-Channel Electronic Pipettes automate liquid handling and pipetting for most daily wetlab applications. Best for medium- to high-throughput workflows.
