Introduction

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA(e.g., genomic, viral, mitochondrial) can be purified from small volume of blood, tissue and dry blood spots.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 1-10μl blood, <10mg tissue, urine, blood stain, seminal stain
Applications	PCR, southern bolt and virus detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Animal tissues, blood stain, urine, seminal stain and various forensic samples
Sample amount	Blood:1-100μl, Tissue:<10mg
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column

Principle

This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mmTris, pH9.0, 0.5mm EDTA).

Advantages

• Fast – several samples can be extracted in 20 minutes (after digestion)
• High purity – purified DNA can be directly used in various downstream applications
• High recovery – DNA can be recovered at the level of PG
• Good repeatability – silica technology can obtain ideal results every time

Kit Contents

Contents	D312502	D312503
Purification Times	50 Preps	250 Preps
Buffer ATL	15 ml	60 ml
Buffer AL	15 ml	60 ml
Buffer GW1*	22 ml	66 ml
Buffer GW2*	20 ml	2 x 50 ml
Carrier RNA	310 μg	2 x 310 µg
Proteinase K	24 mg	120 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer AE	15 ml	60 ml
HiPure DNA Mini Columns I	50	2 x 125
2 ml Collection Tubes	100	5 x 100

Storage and Stability

Carrier RNA and Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under theseconditions.

Experiment Data

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA(e.g., genomic, viral, mitochondrial) can be purified from small volume of blood, tissue and dry blood spots.

Overview

• Purification and enrichment of intact plasma/serum exosomes for functional studies
• Isolate all sizes of RNA, including microRNA, irrespective of size or GC content, without bias
• Versatile plasma/serum input volume
• No phenol extractions, Proteinase K treatment, nor carrier RNA required
• No time-consuming ultracentrifugation, filtration nor special syringes required
• No precipitation reagents, nor overnight incubation required
• Compatible with plasma/serum from most species
• Pure exosomes are purified and are free from any other RNA-binding proteins
• Purification is based on spin column chromatography that uses Norgen’s proprietary resin
• The purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing. Find out more information on Norgen’s NGS services

Norgen’s Plasma/Serum Exosome and RNA Isolation Kits constitute all-in-one systems for the purification of exosomes and the sequential isolation of exosomal RNA from different plasma/serum sample volumes. The purification is based on spin column chromatography that employs Norgen’s proprietary resin. These kits are designed to isolate all sizes of RNA, including microRNA, irrespective of size or GC content, without bias. These kits provide a clear advantage over other available kits in that they do not require any special instrumentation, protein precipitation reagents, extension tubes, phenol/chloroform or protease treatments. The RNA isolated from the purified exosomes is free from any protein-bound circulating RNA and is of the highest integrity. The purified RNA can be used in a number of downstream applications including real time PCR, reverse transcription PCR, Northern blotting, RNase protection and primer extension, and expression array assays.

Norgen’s Plasma/Serum Exosome and RNA Isolation Mini Kit

For sample volumes ranging from 50 µL to 1 mL. This kit allows the user to elute into a flexible elution volume ranging from 50 µL to 100 µL.

Norgen’s Plasma/Serum Exosome and RNA Isolation Midi Kit

For sample volumes ranging from 1 mL to 4 mL. This kit allows the user to elute into a flexible elution volume ranging from 50 µL to 100 µL.

Norgen’s Plasma/Serum Exosome and RNA Isolation Maxi Kit

For sample volumes ranging from 4 mL to 10 mL. This kit allows the user to elute into a flexible elution volume ranging from 50 µL to 100 µL.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications
Minimum Plasma/Serum Input	4 mL
Maximum Plasma/Serum Input	10 mL
Size of Exosomes Purified	40 nm – 150 nm
Size of RNA Purified	All sizes, including miRNA and small RNA (< 200 nt)
Elution Volume	50-100 μL
Time to Complete 10 Purifications	35 – 40 minutes
Average Yields*	Variable depending on specimen

*Please check page 4 of the product insert for the average yields and the common RNA quantification methods

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.

Important Note
This kit is suitable for the purification of exosomes from fresh or frozen serum or plasma prepared from blood collected on either EDTA or Citrate. Plasma samples prepared from blood collected on heparin should not be used as heparin can significantly interfere with many downstream applications such as RT-PCR.

Component	Cat. 58300 (50 preps)	Cat. 58500 (25 preps)	Cat. 58600 (15 preps)
Slurry E	12.5 mL	12.5 mL	12.5 mL
ExoC Buffer	8 mL	8 mL	2 x 8 mL
ExoR Buffer	12 mL	12 mL	12 mL
Lysis Buffer A	20 mL	20 mL	20 mL
Lysis Additive B	2 mL	2 mL	2 mL
Wash Solution A	38 mL	18 mL	18 mL
Elution Solution A	6 mL	6 mL	6 mL
Mini Filter Spin Columns	50	25	15
Mini Spin Columns	50	25	15
Collection Tubes	50	25	15
Elution Tubes (1.7 mL)	100	50	30
Product Insert	1	1	1

Overview

• Protocol optimized for DNA isolated from a diversity of samples including stool, soil, water, saliva, plant, urine, skin, and more
• Simple and quick workflow: library could be prepared in less than 5 hours
• Component of Norgen’s metagenomics workflow
• A single NGS run can be prepared with up to 384 unique dual-index libraries

Sample type purification kit guide 

The 16S V1-V2 Library Preparation Kit for Illumina consists of the reagents and components required for library preparation of the 16S V1-V2 amplicon libraries to be used for next-generation sequencing on Illumina platforms. All molecular reagents including primers, enzyme mixes, indexes, and buffers are provided. Instructions for PCR clean up with the AMPure XP Magnetic Beads (supplied by customer) are also included for rapid purification of nucleic acid products generated at two steps of the workflow. The library prep workflow could be used for purified DNA inputs from different sources including stool, soil, water, saliva, plant, urine, skin swab, vaginal swab, cheek swab, nasal swab, plasma/serum, tongue swab, gum swab, and others.

The 16S V1-V2 Library Preparation Kit for Illumina has a streamlined procedure that reduces the handling time such that the library prep procedure can be completed in approximately 4 hours (see diagram below). Input DNA is first subjected to targeted PCR to amplify the V1-V2 region of the DNA encoding 16S rRNA. The post-PCR reaction is then cleaned up using AMPure XP beads. Dual index primers are then added using a limited-cycle PCR. The indexed amplicons flanked by 5′ and 3′ barcoded adaptors are then cleaned using AMPure XP beads. The libraries are then ready for quantification, pooling and sequencing.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Minimum amount of starting material:	2.5 µL of DNA (5 ng/µL)
Time to complete library preparation:	4 hours

Storage Conditions and Product Stability
Norgen’s 16S V1-V2 Library Prep Kit for Illumina is shipped as one kit box (for the 24 prep kit) or two sub-component kits (for the 96 prep kit). All kits should be stored at -20°C upon arrival.

All kit components should remain stable for at least 1 year when stored at the specified storage conditions.

Step	Component	Cat. 70100 (24 preps)	Cat. 70110, 70120, 70130, 70140 (96 preps)
Amplicon PCR (PCR 1)	MGX Master Mix	330 µL	1,320 µL
	16S V1-V2 Primer Mix	70 µL	280 µL
Index PCR (PCR 2)	Indexing Master Mix	660 µL	2 x 1,320 µL
	N7xx Index Primer	50 µL	50 µL
	S5xx Index Primer	70 µL	70 µL
PCR Clean-Up	Resuspension Buffer	2 x 1,250 µL	2 x 5,000 µL
	Nuclease-free water	1,250 µL	1 x 6,000 µL