DBCO-Sulfo-Link-biotin

Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes

Accommodates any common PCR strips or individual PCR tubes

Tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet 

SKU #

MSR812

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down front side
• Rubber feet to help prevent slippage
• Stable design
• Angled tube holes which allow the tubes to come close to magnets
• Each tube has its own magnet

Compatibility

• Up to 24 Individual PCR tubes
• Up to two, 8-strip PCR tube strips
• Up to two, 12-strip PCR strips
• Any Magnetic Beads

Volumes

Maximum  – .2 mL 

Minimum  – 30 µL 

Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes

Description 

The DM3260 FluoroBand™ 1 KB Plus (0.1-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM3260 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank. 

Features

• Sharp bands
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months
• Directly observed by UV or blue light— premixed with high sensitive DNA fluorescent dye

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.

Range 

100 ~ 10,000 bp 

Concentration 

87 µg/ 500 µl  

Recommended loading volume 

5 µl/ well

Storage

Protected from light 
Room temperature for 6 months
4°C for 12 months 
-20°C for 24 months 

The DM3260 FluoroBand™ 1 KB Plus (0.1-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM3260 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.

K-FGLQR

SKU: 700007621

50 assays (manual) / 500 assays (auto-analyzer)

Content:	50 assays (manual) / 500 assays (auto-analyzer)
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels

Analyte:	D-Fructose, D-Glucose
Assay Format:	Spectrophotometer, Auto-analyzer
Detection Method:	Absorbance
Wavelength (nm):	340
Signal Response:	Increase
Linear Range:	2.5 to 150 µg of D-glucose plus D-fructose per assay
Limit of Detection:	6 mg/L
Limit of Quantification:	16 mg/L
Reproducibility (%):	< 5%
Reaction Time (min):	~ 15 min for Total Sugars

The D-Fructose/D-Glucose (Liquid Ready™) assay kit is a method for the specific measurement and analysis of D-Fructose/D-Glucose in wine, beverages, foodstuffs and other materials. Measurements can be performed separately or combined.  Supplied as a 2-reagent format “ready to use” liquid stable formulation that is suitable for manual and auto-analyzer formats with a simple, reliable and accurate method.

Find more of our monosaccharide and oligosaccharide assay kits.

Advantages

• ”Ready to use” liquid stable formulation – no reconstitution needed
• PVP incorporated to prevent tannin inhibition
• Standard included 
• Suitable for manual and auto-analyzer formats
• Quick Reference Guide available
• Mega-Calc™ software tool is available for hassle-free raw data processing

The D-Fructose/D-Glucose (Liquid Ready™) assay kit is a method for the specific measurement and analysis of D-Fructose/D-Glucose in wine, beverages, foodstuffs and other materials. Measurements can be performed separately or combined. Supplied as a 2-reagent format “ready to use” liquid stable formulation that is suitable for manual and auto-analyzer formats with a simple, reliable and accurate method.