TCO-PEG6-DBCO is a PEG6 linker featuring a trans-cyclooctene and a DBCO group. DBCO is a click chemistry handle which easily reacts with azides, while the TCO function readily reacts with tetrazine groups in target compounds.
TCO-PEG6-DBCO is a PEG6 linker featuring a trans-cyclooctene and a DBCO group. DBCO is a click chemistry handle which easily reacts with azides, while the TCO function readily reacts with tetrazine groups in target compounds.
TCO-PEG6-DBCO is a PEG6 linker featuring a trans-cyclooctene and a DBCO group. DBCO is a click chemistry handle which easily reacts with azides, while the TCO function readily reacts with tetrazine groups in target compounds.
This fast screening test kit contains 10 tests with everything needed for accurate results of unsafe lead levels in the field.
This is a revolutionary product designed to make Lead testing in water safe, easy, and affordable. This fast screening test kit contains 10 tests with everything needed for accurate results of unsafe lead levels. With reliable results in only 10 minutes, this test kit clearly gives results confirming Lead in water and conforming to the EPA guideline of 15 ppb (µg/L). The kit can test water quality from various sources including faucets, wells (ground water), and home purification systems.
Standards and Regulations for Lead [ACCLPP 2012]
High Blood lead levels (i.e., greater than 700ppb) can cause serious health effects, including seizure, coma, and death. Blood levels as low as 100ppb have been associated with adverse effects on cognitive development, growth, and behavior among children aged 1-5 years.
Sample method:
1. Take a first-draw sample
Immediately after opening a faucet or valve, collect a 250 mL sample. This sample should be from each tap used for consumption.
2. Take a flush sample
If first-draw sample results show elevated lead levels of 5 ppb or higher, collect a flush sample. To do this, ensure water has not been used for between 8 to 18 hours, then collect the sample at 30 seconds.
3. Take sequential samples
If you want to test a lead service line, collect 8 to 10 sequential samples, depending on how far the line is from the tap.
Screening of Lead in water samples 5-10 ppb
Format: 10 tests (5 tests/5 controls)
Run Time: 15 Minutes
The ssDNA Quantification Kit is developed for single stranded DNA quantification. The kit includes ssDNA Dye, ssDNA Dilution Buffer, and two ssDNA Standards. Simply dilute the ssDNA Dye with the ssDNA Dilution Buffer, add DNA sample (volume from 1-20 μL), then read the concentration using the Qubit® Fluorometer. The assay is accurate for DNA concentrations from 50 pg/µL to 200 ng/µL based on the line corresponding of the data to standards.
Our kit detects ssDNA by using fluorescent dye that enables sensitive single stranded DNA quantification , including ssDNA viruses, synthetic ssDNA, first-strand cDNA synthesis, denatured DNA, and bisulfate-converted DNA etc. ssDNA quantification is essential for the study of the biological process involves ssDNA.
Features
A series of input ssDNA (200, 400, 600, 800, 1000, and 1200 ng) was used.
The performance of the BioDynami ssDNA Quantification Kit is nearly identical to that of Thermo Fisher’s Qubit ssDNA kit (figure below).
Comparison of BioDynami ssDNA Quantification Kit with Thermo Fisher kit.
Common contaminants such as salts, solvents, or detergents are well tolerated in the assay (Table 1).
Contaminants has been tested in BioDynami ssDNA Kit.
The ssDNA Quantification Kit is developed for single stranded DNA quantification. The kit includes ssDNA Dye, ssDNA Dilution Buffer, and two ssDNA Standards. Simply dilute the ssDNA Dye with the ssDNA Dilution Buffer, add DNA sample (volume from 1-20 μL), then read the concentration using the Qubit® Fluorometer. The assay is accurate for DNA concentrations from 50 pg/µL to 200 ng/µL based on the line corresponding of the data to standards.
Norgen’s Plant/Fungi Total RNA Purification Kit provides a rapid method for the isolation and purification of total RNA, including virus and viroid RNA, from a wide range of plants. Total RNA can be purified from fresh or frozen plant tissues, plant cells or filamentous fungi samples using this kit. All sizes of RNA are purified, including microRNA (miRNA) . The procedure is rapid and convenient.
The RNA is purified without the use of phenol or chloroform. The purified RNA is of the highest quality, and can be used in a number of downstream applications including real time PCR, reverse transcription PCR, Northern blotting, RNase protection and primer extension, and expression array assays.
Norgen’s Plant/Fungi Total RNA Purification Kit is also available in a 96-well (High Throughput) format for high throughput applications. Purification with the 96-well plates can be performed using either a vacuum manifold or centrifugation.
Figure 1 / 4
Click for expanded view
| Kit Specifications – Spin Column | |
| Maximum Column Binding Capacity | 50 μg |
| Maximum Column Loading Volume | 650 μL |
| Size of RNA Purified | All sizes, including small RNA (< 200 nt) |
| Maximum Amount of Starting Material: Plant Tissues Plant Cells Fungi | 50 mg 1 x 106 cells 50 mg (wet weight) |
| Average Yield* 50 mg Tomato Leaves 50 mg Tobacco Leaves 50 mg Plum Leaves 50 mg Grape Leaves 50 mg Peach Leaves | 60 μg 60 μg 32 μg 35 μg 30 μg |
| Time to Complete 10 Purifications | 30 minutes |
* Yield will vary depending on the type of sample processed.
* Yield will vary depending on the type of sample processed.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
Tobacco (Nicotiana tabacum)
Tomato (Lycopersicon esculentum)
Pepper (Capsicum annuum)
Potato (Solanum tuberosum)
Arabidopsis thaliana1
Peach (Prunus persica)
Apple (Malus sp.)
Pear (Pyrus sp.)
Grape vine (Vitis sp.)
Plum (Prunus sp.)
Palm (Arecaceae)
Pine needle (Pinaceae)
Strawberry
Raspberry
Blackberry
Herbs
Persimmon (Ebenaceae)
Potato tuber (Solanum)
Plum fruit
Citrus
Vanilla bean
Cotton (Gossypium)
Mangrove
Chrysanthemum
Grape berry skin
Kiwi leaves
Peach (fruits and flowers)
Soy bean (legume)
Eastern White Red Cedar
Corn leaves
Cucumber leaves
Aspergillus niger
Mucor racemosus
Cladosporium cladosporioides
Fusarium oxysporum
Penicillium sp.
Botrytis cinerea (Botryotinia fuckeliana)
Pichia sp.
Rhizopus oryzae
Alternaria tenuissima
| Component | Cat. 25800 (50 preps) | Cat. 31350 (100 preps) | Cat. 25850 (250 preps) | Cat. 31900 (192 preps) |
|---|---|---|---|---|
| Lysis Buffer C | 60 mL | 1 x 30 mL, 1 x 60 mL | 3 x 60 mL | 2 x 60 mL |
| Wash Solution A | 38 mL | 38 mL | 1 x 18 mL, 2 x 38 mL | 2 x 38 mL |
| Elution Solution A | 6 mL | 6 mL | 20 mL | 20 mL |
| Filter Columns | 50 | 100 | 250 | – |
| Spin Columns | 50 | 100 | 250 | – |
| 96-Well Plate | – | – | – | 2 |
| Adhesive Tape | – | – | – | 4 |
| Collection Tubes | 100 | 200 | 500 | – |
| 96-Well Collection Plate | – | – | – | 2 |
| Elution Tubes (1.7 mL) | 50 | 100 | 250 | – |
| 96-Well Elution Plate | – | – | – | 2 |
| Product Insert | 1 | 1 | 1 | 1 |