Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.

Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads 

SKU #

A040523

A040523KT (Kit for 0.2 ml tubes)

Features

• ANSI/ SBS footprint
• Compatible with 384-well and 96-well plates
• Cushion base for added benefits
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Made in USA 
• For Research use only

Compatibility

• 384-well pcr plates
• Some 384-well deep well plates
• Full-, Semi-, and un-Skirted 96-well PCR Plates
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volume

384-Well PCR

Maximum – 39 µL 

Minimum – 5 µL 

__________

96-Well PCR

Maximum – 60 µL (0.2 mL for some beads)

Minimum – 4 µL

Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

Introduction

This kit is used for extracting total viral nucleic acid from non-cell/low cell content biological samples such as body fluid, serum, plasma, immersion solution, tissue homogenate supernatant, culture supernatant, etc., the extracted products can be used for clinical in vitro detection.

Details

Specifications

Features	Specifications
Main Functions	Extract viral RNA/DNA from 200μl plasma/serum samples
Applications	RT-PCR，PCR，NGS
Products	Viral DNA / RNA, body cell DNA / RNA
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Plasma, serum, effusion, urine, fecal suspension supernatant
Sample amount	200μl
Elution volume	≥30μl
Time per run
Liquid carrying volume per column	800μl
Binding yield of column	100μg

Principle

This product is based on silica gel purification. The sample is lysed and digested with lysate and protease, DNA/RNA is released into the lysate. Transfer to an adsorption plate and filter column. DNA/RNA is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, DNA / RNA was finally eluted with low-salt buffer (10 MmTris, pH 8.0).

Advantages

• Fast – column purification without PK digestion
• High quality – high purity total RNA can be directly used in various sensitive downstream applications
• Safe – no phenol chloroform extraction required
• Sensitive – DNA/RNA can be recovered at the level of PG

Kit Contents

Contents	IVD4175
Purification Times	100 Preps
HiPure Viral Column	100
2ml Collection Tubes	100
PK/Carrier RNA	50 mg/310μg
Protease Dissolve Buffer	5 ml
Buffer VLE	42 ml
Buffer CE	60 ml
RNase Free Water	15 ml

Storage and Stability

This kit is shipped and stored at room temperature and is valid for 12 months.

This kit is used for extracting total viral nucleic acid from non-cell/low cell content biological samples such as body fluid, serum, plasma, immersion solution, tissue homogenate supernatant, culture supernatant, etc., the extracted products can be used for clinical in vitro detection.

Designed for those labs wishing to separate magnetic beads into rings.

The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

SKU #

RLE500

Features

• SBS/ SLAS footprint
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Integrated bracket to help keep microplate in place and flat
• Made in USA 
• For Research use only

Compatibility

• Full- skirt PCR plates
• 1/2- skirt PCR plates 
• Un-skirted PCR plates
• Any magnetic beads
• Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volumes

Maximum  – 150 µL 

Minimum  – 5 µL 

Designed for those labs wishing to separate magnetic beads into rings.

The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation