PEG3-bis(Amino-Tri-(Propargyl-PEG2-ethoxymethyl)-methane) is a crosslinker consisting of six propargyl groups. The propargyl groups can form triazole linkage with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The hydrophilic PEG spacer increases solubility in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
PEG3-bis(Amino-Tri-(Propargyl-PEG2-ethoxymethyl)-methane) is a crosslinker consisting of six propargyl groups. The propargyl groups can form triazole linkage with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The hydrophilic PEG spacer increases solubility in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG12-amine is a heterobifunctional reagent that enables amide formation with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group is reactive with azide compounds via copper catalyzed azide-alkyne Click Chemistry to yield a stable triazole linkage. The PEG units enhance the hydrophilicity of the molecule in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG12-amine is a heterobifunctional reagent that enables amide formation with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group is reactive with azide compounds via copper catalyzed azide-alkyne Click Chemistry to yield a stable triazole linkage. The PEG units enhance the hydrophilicity of the molecule in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Norgen’s FFPE RNA Purification Kits provide a rapid method for the isolation and purification of total RNA (including microRNA) from formalin-fixed paraffin-embedded (FFPE) tissue samples in as little as 1 hour. Using formalin to fix tissues leads to crosslinking of the RNA and proteins, and the process of embedding the tissue samples can also lead to fragmentation of the RNA over time. Norgen’s FFPE RNA Purification Kits provide conditions that allow for the partial reversing of the formalin modifications, resulting in a high quality and yield of RNA. These kits are able to purify all sizes of RNA, from large mRNA and ribosomal RNA down to microRNA (miRNA) and small interfering RNA (siRNA), depending on the age of the FFPE tissue as fragmentation of the RNA is known to occur over time. The RNA is preferentially purified from other cellular components without the use of phenol or chloroform.
FFPE RNA Purification Kit (Spin Column)
Maximum loading volume of 650 μL per column, and a maximum binding capacity of 50 μg per column.
FFPE RNA Purification 96-Well Kit (High Throughput)
Purification is based on 96-well column chromatography using Norgen’s proprietary resin as the separation matrix. Purification can be performed using either a vacuum manifold or centrifugation. Maximum loading volume of 400 μL per well, and a maximum binding capacity of 50 μg per well.
Figure 1 / 5
Click for expanded view
| Kit Specifications | |
| Maximum Binding Capacity Per Well | 50 μg |
| Maximum Loading Volume Per Well | 400 μL |
| Size of RNA Purified | All sizes, including small RNA (< 200 nt) |
| Maximum Amount of Starting Material: | 5 slices of < 20 µm thick paraffin 25 mg of unsectioned block |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. The DNAse I should be stored at -20°C upon arrival. The Proteinase K should be stored at -20°C upon arrival and after reconstitution. This kit is stable for 1 year after the date of shipment.
| Component | Cat. 25300 (50 preps) | Cat. 25400 (2 x 96 preps) |
|---|---|---|
| Digestion Buffer A | 25 mL | 2 x 25 mL |
| Buffer RL | 30 mL | 2 x 30 mL |
| Enzyme Incubation Buffer | 6 mL | 2 x 6 mL |
| Wash Solution A | 38 mL | 2 x 38 mL |
| Elution Solution A | 6 mL | 2 x 20 mL |
| Proteinase K | 12 mg | 2 x 20 mg |
| DNase I | 1 vial | 2 x 500μL |
| Micro Spin Columns | 50 | – |
| 96-Well Incubation Plate | – | 2 |
| 96-Well Plate | – | 2 |
| Adhesive Tape | – | 8 |
| Collection Tubes | 50 | – |
| 96-Well Collection Plate | – | 2 |
| Elution Tubes (1.7 mL) | 50 | – |
| 96-Well Elution Plate | – | 2 |
| Product Insert | 1 | 1 |
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request
