Rapid and simple procedure to generate digested peptides
Simultaneous digestion, purification and concentration at once
Peptide generation is complete, with no generation of additional artifacts being detected in mass spectrometry
Peptides are ready for applications such as mass spectrometry and SDS-PAGE
Purification is based on spin column chromatography that uses Norgen’s resin separation matrix
This kit is highly efficient in the enzymatic digestion of simple and complex protein samples using trypsin and the subsequent purification of the resulting peptides using a convenient spin column format. Trypsin is added to the protein sample and bound to the column. Salts are washed away and the trypsin is then activated to digest proteins. Peptides are then eluted in a small volume and ready for downstream analysis. The peptides generated are complete, with no additional artifacts being detected in mass spectrometry. Fifteen micrograms of protein can be processed, digested and purified with each spin column with about 20 minutes of hands-on time (plus trypsin incubation). The simultaneous protein digestion and volumetric concentration of the purified peptides makes the kit a convenient method for preparing peptides to be analyzed by many downstream applications such as mass spectrometry and more.
Storage Conditions All solutions should be kept tightly sealed and stored at room temperature. Once opened, the solution should be stored at 4°C. This kit is stable for 2 years after the date of shipment.
Component
Cat. 17500 (25 preps)
Wash Solution C
30 mL
Binding Buffer A
4 mL
Column Activation Buffer
3 mL
Micro Spin Columns
25
Collection Tubes
25
Elution tubes (1.7 mL)
25
Product Insert
1
Other Products
D3317 SolPure HW DNA Kit
Product Info
Document
Product Info
Introduction
This product uses an improved salt precipitation purification method to provide a safe and economical solution for High Weight genomic DNA extraction from blood samples, tissue samples, cultured cells, oral swabs, bacteria, and other samples. The extraction does not require the use of toxic phenol chloroform or any expensive reagents, making it the most economical reagent kit for nucleic acid extraction at present. This kit has no limit on the amount of sample used and can flexibly adjust various amounts of samples. The obtained DNA can be directly used for experiments such as PCR, enzyme digestion, Southern hybridization, and the Third-generation sequencing.
Details
Principles
SolPure DNA Kits is an improved salt precipitation purification method. (Blood samples are lysed in red blood cell lysis buffer to remove red blood cells, and white blood cells are collected by centrifugation.) After lysis, DNA is released into the lysis buffer. RNA is removed by RNASE A. High salt solution is added to precipitate proteins and impurities. Centrifuge to remove precipitate and obtain supernatant containing only DNA. Add isopropanol to precipitate and recover DNA. Wash with 70% ethanol to remove salt, and finally add Buffer TE to dissolve DNA.
Kit Contents
Contents
D3317-01
D3317-02
D3317-03
Purification Times
10
50
250
10 x Buffer RBC
4 ml
50 ml
100 ml
Buffer STE
60 ml
250 ml
2 x 550 ml
Buffer SDS (20%)
6 ml
25 ml
100 ml
Buffer PPS
20 ml
90 ml
400 ml
Proteinase K
12 mg
50 mg
240 mg
Protease Dissolve Buffer
1.8 ml
10 ml
20 ml
RNase A
5 mg
20 mg
60 mg
Buffer TE
10 ml
60 ml
250 ml
Storage and Stability
RNase A and Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 4 weeks) at room temperature (15–25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15–25°C) and are stable for at least18 months under these conditions. The entire kit can be stored at 2–8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
Document
This product uses an improved salt precipitation purification method to provide a safe and economical solution for High Weight genomic DNA extraction from blood samples, tissue samples, cultured cells, oral swabs, bacteria, and other samples. The extraction does not require the use of toxic phenol chloroform or any expensive reagents, making it the most economical reagent kit for nucleic acid extraction at present. This kit has no limit on the amount of sample used and can flexibly adjust various amounts of samples. The obtained DNA can be directly used for experiments such as PCR, enzyme digestion, Southern hybridization, and the Third-generation sequencing.
CE-IVD marked version available for in vitro diagnostic use
Available in TaqMan format for analysis
Varicella zoster virus (VZV) is one of eight herpes viruses known to infect humans and other vertebrates. VZV commonly causes chicken-pox in children and both shingles and postherpetic neuralgia in adults. Primary VZV infection results in chickenpox, which may rarely result in complications including encephalitis or pneumonia. VZV, like other herpes viruses, remains dormant in the nervous system of the infected person, and in 10-20% of cases the VZV reactivates later in life producing a disease known as herpes zoster or shingles. Serious complications of shingles include postherpetic neuralgia, zoster multiplex, myelitis, herpes ophthalmicus, or zoster sine herpete.
VZV TaqMan PCR Kit, 100 reactions
Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
Specific Primer and Probe mix for the pathogen/virus/viroid of interest
Primer and Probe mix
Positive and negative control to confirm the integrity of the kit reagents
VZV TaqMan PCR Probe/Primer Set and Controls, 100 reactions
Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
Nuclease-free water
Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix
Storage Conditions and Product Stability All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
DNA Isothermal Rapid Amplification Kit (Colloidal Gold Test Strip Type)
Product Info
Document
Product Info
Product Details
Application:
DNA Nucleic Acid
Format:
NFO Kit
Kit Components:
Reagents,Buffer,Enzymes
Manufacturer:
Amp-future Bio
Product Name:
DNA Isothermal Rapid Amplification Kit (Colloidal Gold Test Strip Type)
Reaction Time:
5-20mins
Reaction Volume:
50μL
Sensitivity:
500-1000copies/ml
Shelf Life:
14 Months
Specificity:
High
Storage Conditions:
-20℃
Suitability:
Universal
High Light:
Isothermal DNA Amplification Kit
,
DNA Amplification Kit NFO
,
20mins nucleic acid amplification
Payment & Shipping Terms
Minimum Order Quantity
48T
Price
USD$3.8/T
Packaging Details
16T/Bag,48T/Box
Delivery Time
6 working days
Payment Terms
T/T, MoneyGram
Supply Ability
100000T/Month
Product Description
DNA Isothermal Rapid Amplification Kit (Colloidal Gold Test Strip Type)
【Principle Overview】
This kit is based on a rapid nucleic acid amplification technology at room temperature and constant temperature: at room temperature and constant temperature (generally 39℃~42℃), with the help of auxiliary proteins and single-strand binding proteins, the recombinase and primers form a complex; Source search and combine the target homology domain, at this time, a D-loop region is formed at the homology position and strand exchange begins; along with the dissociation of the recombinase from the complex, the polymerase also binds to the 3′ end of the primer and begins chain extension. Relying on the action of nfo enzyme, adding specific molecular probes designed according to the template, and using colloidal gold technology (sandwich method) can detect the final result.
【Primer design】
It is recommended to use primers with a length of 30-35 bp.Too short primers will affect the amplification speed and detection sensitivity;the 5′ end of the reverse primer is labeled with a modification group (commonly used biotin).
Primers are designed to avoid the formation of secondary structures that affect amplification; the length of the amplicon is recommended to be 150-500bp.
【Colloidal gold probe design】
In the middle of the forward and reverse primer,design a sequence of 46-52nt in length that is complementary to the target fragment; modify an antigen marker (typical FAM) at the 5′ end;mark a dSpacer (tetrahydrofuran, THF) in the middle of the 5′ end and the 3′ end ), as the recognition site of nfo;the 3′ end is labeled with a modification group, such as amine group, phosphate group or C3-Spacer, etc.
【Features】
This kit has the advantages of high sensitivity, strong specificity,and short reaction time (only 15 minutes),and the reaction components are in dry powder state,which is easy to operate and easy to store.
This reagent has low equipment requirement,and the reaction operation can be carried out in metal baths, water baths, etc.,and there is no need to purchase expensive exclusive equipment such as PCR amplifiers.
Composition
Content
A buffer
1.6mL×1Tube
B buffer
150μL×1Tube
Positive control template-II
100μL×1Tube
Positive control probe and primer mix-II
70μL×1Tube
Reagent
48 T
Guide Manual
1 Copy
【Kit storage】
1. Storage conditions: storage temperature ≤ -20℃constant temperature environment, keep away from light and avoid heavy pressure;
2. Product validity period: 14 months;
3. See the outer packaging for the production date.
Document
This kit is based on a rapid nucleic acid amplification technology at room temperature and constant temperature: at room temperature and constant temperature (generally 39℃~42℃), with the help of auxiliary proteins and single-strand binding proteins, the recombinase and primers form a complex; Source search and combine the target homology domain, at this time, a D-loop region is formed at the homology position and strand exchange begins; along with the dissociation of the recombinase from the complex, the polymerase also binds to the 3′ end of the primer and begins chain extension. Relying on the action of nfo enzyme, adding specific molecular probes designed according to the template, and using colloidal gold technology (sandwich method) can detect the final result.
