Opentrons Flex 8-Channel pipettes enable highly accurate pipetting, optimized for automation.
Flex pipettes use air displacement technology to offer highly accurate pipetting with pipette volume ranges from 1 to 50 µL and 5 to 1000 μL. Smart sensors support automatic calibration, real-time positioning, and error detection. Choose the pipettes that fit your workflow — the gantry supports any two Flex 1-Channel or 8-Channel Pipettes — and swap them out yourself when your workflow changes.
Opentrons Flex 8-Channel pipettes enable highly accurate pipetting, optimized for automation.
Flex pipettes use air displacement technology to offer highly accurate pipetting with pipette volume ranges from 1 to 50 µL and 5 to 1000 μL. Smart sensors support automatic calibration, real-time positioning, and error detection. Choose the pipettes that fit your workflow — the gantry supports any two Flex 1-Channel or 8-Channel Pipettes — and swap them out yourself when your workflow changes.
Virgin Polypropylene 96 Square Well plate with high uniformity from well to well.
This product is suitable for extracting total RNA from 50-150mg conventional plantor fungal samples as well as samples rich in polyphenolic and polysaccharides. This kit is based on silica gel column purification technology, and the extraction process does not require the use of toxic phenol chloroform extraction. The entire extraction process only takes 20-30 minutes. This kit adopts DNA filtration technology, which can efficiently filter and remove DNA. The obtained RNA can be directly used for experiments such as RT-PCR, Northern Blot, poly A+ purification, nucleic acid protection, and in vitro translation.
Kit Contents
| Contents | R415002 | D415003 |
| Purification Times | 50 Preps | 250 Preps |
| HiPure RNA Mini Columns | 50 | 250 |
| gDNA Filter Columns | 50 | 250 |
| 2ml Collection Tubes | 100 | 500 |
| TCEP (1M) | 0.29 g | 5 x 0.29 g |
| Buffer EP | 1.0 ml | 5.0 ml |
| Buffer PSL | 50 ml | 250 ml |
| Buffer RW1 | 50 ml | 250 ml |
| Buffer RW2* | 20 ml | 2 x 50 ml |
| RNase Free Water | 10 ml | 30 ml |
Storage and Stability
Except TCEP, the kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions. After receiving the product, it is recommended to store TCEP (dry powder) at -20-8°C. At low temperatures, Buffer PSL may form precipitates, dissolve it completely by 55°C water bath.
1. When dealing with woody or uncommon samples, R4150 is recommended first. R4150 contains two polysaccharide/polyphenol lysis buffer, which is the most universal product.
2. R4151 is recommended for handling common economic crop samples for the first time. Strong lysis solution can be used to process easy-extraction samples. The amount of corn or rice leaves samples can reach up to 300mg.
3. R4165 adopts CTAB/chloroform method, which can also handle a large number of difficult-to-extraction plants, but requires contact with chloroform substitutes, which is less safe than other kits. This kit uses DNase Ⅰ to remove DNA, which is also a good choice for extracting polysaccharide/polyphenol-rich plant samples.
4. R4014 is recommended for fruit/starch plant samples, which uses improved trizol pre-treatment, single column operation and is more economical.
This product is suitable for extracting total RNA from 50-150mg conventional plantor fungal samples as well as samples rich in polyphenolic and polysaccharides. This kit is based on silica gel column purification technology, and the extraction process does not require the use of toxic phenol chloroform extraction. The entire extraction process only takes 20-30 minutes. This kit adopts DNA filtration technology, which can efficiently filter and remove DNA. The obtained RNA can be directly used for experiments such as RT-PCR, Northern Blot, poly A+ purification, nucleic acid protection, and in vitro translation.
This kit enables the rapid purification of amplified DNA products from PCR mixes. It is able to effectively remove PCR by-products including primers, dimers, enzymes, unincorporated nucleotides and mineral oil from the desired PCR product. The purified PCR products are fully compatible with restriction enzyme digestion, ligation into vectors, labeling, sequencing and more. This kit can also be used as an alternative to organic extraction and ethanol precipitation to clean up various enzymatic reactions.
The kit is also available in a 96-well format for high-throughput PCR purification. Purification with the 96-well plate can be performed using either a vacuum manifold or centrifugation.
Figure 1 / 2
Click for expanded view
| Kit Specifications – Spin Column | |
| Column Binding Capacity | 10 μg |
| Size of DNA Purified | 100 – 15,000 bp |
| Average Recovery | > 90% |
| Average Primer Removal | > 90% |
| Minimum Elution Volume | 30 μL |
| Time to Complete 10 Purifications | 15 minutes |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.
| Component | Cat. 14400 (50 preps) | Cat. 45700 (250 preps) | Cat. 24800 (192 preps) |
|---|---|---|---|
| Binding Buffer C | 30 mL | 5 x 30 mL | 3 x 30 mL |
| Wash Solution A | 12 mL | 2 x 20 mL | 2 x 38 mL |
| Elution Buffer B | 8 mL | 2 x 30 mL | 2 x 15 mL |
| Spin Columns | 50 | 250 | – |
| Collection Tubes | 50 | 250 | – |
| 96-Well Plate | – | – | 2 |
| Adhesive Tape | – | – | 4 |
| 96-Well Collection Plate | – | – | 2 |
| Elution Tubes (1.7 mL) | 50 | 250 | – |
| 96-Well Elution Plate | – | – | 2 |
| Product Insert | 1 | 1 | 2 |
