Introduction

The MagPure Plasmid purification system uses the paramagnetic bead technology for high-throughput preparation of high-copy or low-copy plasmid DNA from E. coli cells. This kit also can be used with fosmid and BAC vector-based constructs. The system uses alkaline lysis followed by a MagPure purification to differentially bind plasmid DNA to paramagnetic beads. While the DNA is bound to the beads, contaminants can be rinsed away using a simple washing procedure. Because MagPure uses magnetic separation technology, the protocol does not require vacuum filtration. This makes kit extremely amenable to automation. Plasmid DNA purified with this system is most commonly used in Sanger Sequencing and PCR amplification.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 20µg plasmid DNA from 1-3ml bacterial culture
Applications	Enzyme digestion, sequencing, PCR and labeling,  etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Conventional plasmid, plasmid≤30KB
Sample amount	1-3ml
Elution volume	≥50μl

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Lysozyme. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption.The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

1. Suitable for extracting plasmids from 1-5ml or <3ml YT medium.
2. The same amount of buffer 1, 2, and 3 avoids errors caused by adjusting the pipette, making it convenient to use in conjunction with automated workstations.
3. Containing buffer 1 for washing, reducing the problem of false high production.
4. The purified plasmid can be directly used for sequencing, enzyme digestion, PCR, and other applications.

Kit Contents

Contents	P181102	P181103	P181104
Purification Times	100 Preps	500 Preps	5000 Preps
RNase A	10 mg	50 mg	2 x 250 mg
Buffer P1	30 ml	150 ml	2 x 750 ml
Buffer P2	30 ml	150 ml	2 x 750 ml
Buffer N3	30 ml	150 ml	2 x 750 ml
Buffer PW1	35 ml	180 ml	2 x 900 ml
MagPure Particle NB*	2.2 ml	11 ml	2 x 60 ml

Storage and Stability

RNase A and MagPure Particle NB should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. After addition of RNase A, Buffer P1 is stable for 6 months when stored at 2-8°C.

Experiment Data

The MagPure Plasmid purification system uses the paramagnetic bead technology for high-throughput preparation of high-copy or low-copy plasmid DNA from E. coli cells. This kit also can be used with fosmid and BAC vector-based constructs. The system uses alkaline lysis followed by a MagPure purification to differentially bind plasmid DNA to paramagnetic beads. While the DNA is bound to the beads, contaminants can be rinsed away using a simple washing procedure. Because MagPure uses magnetic separation technology, the protocol does not require vacuum filtration. This makes kit extremely amenable to automation. Plasmid DNA purified with this system is most commonly used in Sanger Sequencing and PCR amplification.

Overview

• Detection kits for Candida albicans
• Lyophilized format designed for room temperature shipping
• Available in TaqMan format for analysis

Norgen’s Candida albicans TaqMan PCR Lyophilized Kit is designed for the detection of Candida albicans specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Norgen’s Candida albicans TaqMan Lyophilized Probe/Primer and Control Set is designed for the detection of Candida albicans specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability

• All kit components should be stored at -20°C upon arrival.
• Once reconstituted, repeated thawing and freezing (>2 times) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
• Each kit is provided with 4 tubes of 2X PCR Master Mix and each tube is enough to run 25 reactions. It is not necessary to reconstitute all Master Mix tubes at once. The Master Mix tubes can be reconstituted as and when needed.
• All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

Component	Cat. TM34050L (100 preps)	Cat. TM34010L (100 preps)
MDx TaqMan 2X PCR Master Mix (Lyo)	4 x 350 μL	–
Candida albicans Primer & Probe Mix (Lyo)	280 μL	280 μL
Candida albicans Positive Control (Lyo)	150 μL	150 μL
Nuclease-Free Water (Negative Control)	3 x 1.25 mL	1 x 1.25 mL
Product Insert	1	1