Introduction

HiPure FFPE Nucleic acid Kit supplies a simple and rapid DNA extraction for formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 20 minutes (not including digestion time). DNA can be directly used for downstream applications such as PCR, southern blot and viral DNA detection, etc.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from FFPE tissue samples
Applications	PCR, southern blot and viral DNA detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples
Sample amount	<20mg
Elution volume	>15µl
Time per run	≤20 minutes
Liquid carrying volume per column	4ml
Binding yield of column	100μg

Principle

Hipure FFPE Nuclear acid kit adopts silica gel column purification. The sample is deparaffinated by xylene and digested by lysate and protease. After de crosslinked at 90 ℃, DNA/RNA is released into the lysate. Adding ethanol to adjust the binding conditions, the sample is transferred to the column where DNA/RNA is adsorbed on the membrane and protein is removed without adsorption. Protein and other impurities are washed by buffer GW1, and the salt is removed by buffer GW2. Finally, the DNA / RNA is eluted by low salt buffer.

Advantages

• Safety – deparaffinating without contacting with xylene or other toxic solution
• Fast – without overnight incubation and digestion, several samples can be extracted within 2hours
• High efficiency -remove the formaldehyde modification of DNA, greatly enhancing the sensitivity of PCR

Kit Contents

Contents	D312602	D312603
Purification Times	50 Preps	250 Preps
HiPure DNA Mini Columns I	50	250
2ml Collection Tubes	50	250
Buffer DPS	30 ml	150 ml
Buffer ATL	15 ml	60 ml
Buffer AL	15 ml	60 ml
Buffer GW1*	22 ml	88 ml
Buffer GW2*	12 ml	50 ml
Proteinase K	24 mg	120 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer AE	10 ml	30 ml

Storage and Stability

Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Experiment Data

HiPure FFPE Nucleic acid Kit supplies a simple and rapid DNA extraction for formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 20 minutes (not including digestion time). DNA can be directly used for downstream applications such as PCR, southern blot and viral DNA detection, etc.

DBCO-PEG12-Maleimide is a PEG linker containing a DBCO moiety and a terminal primary maleimide group. The maleimide group will react with a thiol group to form a covalent bond, enabling the connection of biomolecule with a thiol. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

DBCO-PEG12-Maleimide is a PEG linker containing a DBCO moiety and a terminal primary maleimide group. The maleimide group will react with a thiol group to form a covalent bond, enabling the connection of biomolecule with a thiol. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

Description

About the genesig q32 Real-Time PCR Instrument

genesig 32 Overview
The genesig q32 Real-Time PCR Instrument is one of the fastest qPCR instruments on the market today due to its rapid heating and cooling. Assembled from just a few building blocks, this robust qPCR instrument allows analysis of up to 32 samples in both tube or strip format. The powerful genesig q32 software is easily installed from a USB flash drive onto any PC or Mac. The genesig q32 is used with 550 genesig Real-Time PCR Kits for human, vet, and food pathogens, as well as food speciation testing

The genesig Real-Time PCR Kit product range includes tests for a massive range of applications:

• Human Infectious Disease Screening
• Veterinary Diagnostics
• Food and Water testing
• Biothreat Detection

genesig q32 – Cutting edge design and technology
Assembled from just a few building blocks the robust genesig q32 system is easy to transport and install. Up to 32 samples can be run in 0.1 ml tubes or 8-strip format. Fast heating and cooling is achieved by utilizing robust Peltier elements, whilst assay performance is supported further by a heated lid design. Excitation is provided by high intensity LEDs filtered to provide light at 500nm that is capable of exciting all fluorophores commonly used in qPCR. A prism is used to generate spectra from fluorescent emissions. These spectra are imaged using a CMOS camera.

genesig q32 software
The genesig q32 software is delivered and easily installed from a USB flash drive. When installed in a network, the software can control several q32 instruments connected via LAN. The powerful and easy to use software provides the following features:

• Quick start using templates for all genesig kit applications
• Straightforward setup and editing of sample and target information
• Automated analysis modules for absolute and relative quantification, melting curve analysis and endpoint genotyping
• Analysis of full spectral data
• Compatible with Windows, Mac & Linux Systems
• Instrument start from a USB flash drive, using preprogrammed settings
• Data export functions

genesig Real-Time PCR Kit compatible
genesig Real-Time PCR Kits are suitable for use on the genesig q32 instrument. The genesig Kit range includes over 550 kits for human, vet, and food pathogens, as well as food speciation testing. All genesig Kits include a positive control and resuspension buffers. The kits come freeze-dried so that they can be shipped at room temperature for fast delivery to anywhere in the World.

Automated run templates available for:

• genesig Easy Real-Time PCR Kits
• genesig Advanced Real-Time PCR Kits
• genesig Standard Real-Time PCR Kits
• snpsig Real-Time PCR Kits
• quasa Real-Time PCR Kits
• GMO Real-Time PCR Kits

Dimensions: W 24 cm x D 27 cm x H 23 cm
Weight: 7 kg
Operating noise: Electrical: Voltage: 100 – 240 V ( 10%); Frequency: 50 – 60 Hz ( 10%); Power: 170 W
Number of reactions: 32
Reaction vessels: 0.1ml tube and/or 8-tube strips
Reaction volume: 10 – 100 μl (20 μl recommended)
Temperature cycling system: Peltier-based heating & cooling from 40 to 99°C; Heating rate: 4°C/s & Cooling rate: 3°C/s
Temperature uniformity:  /- 0.05°C (SD)
Temperature accuracy:  /- 0.25°C
Run time: Fluorescence excitation: 500 nm nm (blue LED)
Fluorescence detection: 120 optical channels from 510 to 750 nm (CMOS camera)
Factory-calibrated dyes (at shipment): FAM; VIC / HEX
Applications: Relative and absolute quantification analysis; Melting peak analysis; Endpoint genotyping analysis
Sensitivity: 1.1 fold discrimination; 9-log dynamic range; Single copy detection
Connection options: LAN; Direct connection to computer (RJ45); PC-free (USB stick/flash drive controlled)Candidatus Liberibacter asiaticus Manual

Guaranteed results using 550 genesig kits
Fast DNA and RNA analysis in less than 60 minutes
Quick and easy set-up and run
Automated data analysis result calling
Small and robust instrument
Exceptional value for money