Functionally tested GAM conjugated gold
Perfect for Lateral Flow Development and use in final product
40nm gold particles conjugated to GAM are offered in 10 OD 1mL size. If a different OD or amount is required please
Goat Anti-Rabbit (GAR) Conjugated Colloidal Gold for Lateral Flow (1mL of 10OD)
Product image shows functional testing of Goat Anti Mouse (GAM) 40nm colloidal gold on a lateral flow test.
Our products are produced in a state-of-the-art manufacturing facility that enable rapid turnaround times while ensuring batch to batch consistency and reliability.
This kit provides a rapid method for the isolation and purification of both cytoplasmic and nuclear RNA from cultured animal cells and small tissue samples. The kit can be used to isolate all sizes of RNA from the cytoplasmic and nuclear RNA fractions, including all small RNA species without any requirement for phenol. Included in the kit are sufficient reagents to perform either 50 cytoplasmic RNA preparations or 25 cytoplasmic and 25 nuclear RNA preparations. Ten samples can be processed in approximately 45 minutes. This kit is also available in a 100 prep size.
Background
In certain circumstances it is desirable to be able to isolate fractionated RNA as opposed to total RNA. For example, it may be preferable to isolate only mature, cytoplasmic RNA for some studies on expression profiling. Alternatively it may be desirable to isolate nuclear RNA in order to investigate and study pre-processed (non-spliced) RNA. Furthermore, this kit can be used to isolate RNA for downstream applications where it is necessary to avoid DNA contamination, since the cytoplasmic fraction has been shown to be free of all traces of genomic DNA.
Figure 1 / 4
Click for expanded view
| Kit Specifications | |
| Maximum Column Binding Capacity | Up to 50 µg RNA |
| Maximum Column Loading Volume | 650 µL |
| Size of RNA Purified | All sizes, including small RNA (< 200 nt) |
| Time to Complete 10 Purifications | 45 minutes |
| RNA Yield HeLa (1 x 106) – Cytoplasmic RNA HeLa (1 x 106) – Nuclear RNA | 15 µg ≤ 3.5 µg |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Component | Cat. 21000 (50 preps) | Cat. 37400 (100 preps) |
|---|---|---|
| Lysis Buffer J | 20 mL | 2 x 20 mL |
| Buffer SK | 40 mL | 2 x 40 mL |
| Wash Solution A | 38 mL | 2 x 38 mL |
| Elution Buffer E | 6 mL | 2 x 6 mL |
| Mini Spin Columns | 50 | 100 |
| Collection Tubes | 50 | 100 |
| Elution Tubes (1.7 mL) | 50 | 100 |
| Product Insert | 1 | 1 |
K-CARREZ
SKU: 700004270
40-1000 assays per kit (depending on application)
| Content: | 40-1000 assays per kit (depending on application) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: Ambient, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Reaction Time (min): | ~ 15 min |
| pH Range: | 7.5-8 (recommended) |
| Application examples: | Dairy samples including milk, cream, whey protein, cheese, yoghurt and infant formula. Other foodstuffs such as meat, fish may also be possible. |
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.
This product is intended to be used as an accessory kit to the K-LOLAC, K-LACTUL, K-LACGAR, K-LATE, K-DLATE and K-FRHYD assay kits. It may also be suitable for other assay methods where sample clarification is required to remove fats or proteins before sample determination steps.
Note: this method is unsuitable for sample preparation prior to the determination of ascorbic acid (vitamin C), citrate and urea/ammonia.
Advantages
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.
The Opentrons Flex Waste Chute GEN1 occupies position D3 and is used to accept waste such as tips, tip racks, and plates in high volumes. The gripper will pick up the consumable and dispose it into the chute based on your workflow needs. The waste chute is neccesary for all high-throughput workflows and can be paired with the Opentrons Flex Deck Expansion Set to maximize the throughput capabilities of the Opentrons Flex. The following consumables can disposed of into the waste chute:
– NEST 2 mL Deep Well Plate, V Bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 well Plate Flat
– All Opentrons Flex tip racks
The Opentrons Flex Waste Chute GEN1 occupies position D3 and is used to accept waste such as tips, tip racks, and plates in high volumes. The gripper will pick up the consumable and dispose it into the chute based on your workflow needs. The waste chute is neccesary for all high-throughput workflows and can be paired with the Opentrons Flex Deck Expansion Set to maximize the throughput capabilities of the Opentrons Flex. The following consumables can disposed of into the waste chute:
– NEST 2 mL Deep Well Plate, V Bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 well Plate Flat
– All Opentrons Flex tip racks
