Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
This product provides high quality purification of total DNA from whole blood, plasma, serum, buffy coat, or other body fluids, lymphocytes and cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 60 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
This kit can use on manual protocol or 96 channel automated extraction system.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from 200μl whole blood
Applications
PCR, southern bolt and virus detection, etc
Purification technology
Magnetic beads technology
Process method
Manual or automatic
Sample type
Anticoagulant blood, concentrated blood, buffy coat, lymphocytes and cultured cells
Sample amount
200μl
Elution volume
≥50μl
Time per run
≤60 minutes
Principle
This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.
Advantages
High binding force – suitable for handling DNA rich samples, such as whole blood, buffy coat, concentrated blood, etc.
Fast – polydisperse magnetic beads, fast magnetic response and short extraction time
High purity – the obtained DNA can be directly used for second-generation sequencing, PCR based detection, gene bank, etc.
Automatic – saving time and labor and safer
Kit Contents
Contents
D631101
D631102
D631103
Purification Times
48
96
480
MagPure Particles
1.2 ml
2.5 ml
11 ml
Proteinase K
24 mg
50 mg
220 mg
Protease Dissolve Buffer
1.8 ml
5 ml
15 ml
Buffer AL
15 ml
30 ml
120 ml
Buffer GW1*
22 ml
53 ml
220 ml
Elution Buffer
15 ml
30 ml
100 ml
Storage and Stability
Proteinase K, MagPure Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
Document
This product provides high quality purification of total DNA from whole blood, plasma, serum, buffy coat, or other body fluids, lymphocytes and cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 60 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
This kit can use on manual protocol or 96 channel automated extraction system.
HiPure Insect DNA Kits provides a simple and rapid solution for total DNA extraction of insect tissue samples. This kit is based on silica gel column purification technology without toxic phenol chloroform extraction and time-consuming alcohol precipitation. The whole extraction process only takes 30 minutes. HiPure Insect DNA Kit can process tissue samples less than 10mg at a time. Hipure Insect DNA 96 kit can process 96 insect tissue samples at a high throughput. The obtained DNA can be directly used in PCR, Southern blot, viral DNA detection and other experiments.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from insect tissue
Applications
PCR, southern bolt and virus detection, etc
Purification method
96 well DNA plate
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Insect tissue samples
Sample amount
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column
Principles
This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High purity DNA – can be used in sensitive downstream applications such as multiplex and quantitative pcr
Good repeatability – suitable for extracting high-yield DNA from insect tissue samples
Safe – without phenol chloroform extraction and alcohol precipitation
Kit Contents
Contents
D313901
D313902
Purification Times
1 x 96
4 x 96
HiPure DNA Plate
1
4
2.2 ml Collection Plate
1
4
1.6 ml Collection Plate
1
4
0.5ml Collection Plate
1
4
Seal Film
8
32
Buffer ITL
30 ml
120 ml
Buffer IL
30 ml
125 ml
Buffer GW1
44 ml
2 x 110 ml
Buffer GW2
50 ml
3 x 50 ml
Proteinase K
50 mg
200 mg
Protease Dissolve Buffer
6 ml
15 ml
Buffer AE
20 ml
60 ml
Storage and Stability
Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2–8°C, but in thiscase buffers should be redissolved before use. Make sure that all buffers areat room temperature when used.
Document
HiPure Insect DNA Kits provides a simple and rapid solution for total DNA extraction of insect tissue samples. This kit is based on silica gel column purification technology without toxic phenol chloroform extraction and time-consuming alcohol precipitation. The whole extraction process only takes 30 minutes. HiPure Insect DNA Kit can process tissue samples less than 10mg at a time. Hipure Insect DNA 96 kit can process 96 insect tissue samples at a high throughput. The obtained DNA can be directly used in PCR, Southern blot, viral DNA detection and other experiments.
