Promotes flocculation of cyanobacteria cell debris, binds residual phosphate compounds and promotes gradual settling of the cyanobacterial biomass on the sediment.
Attogene’s Nano-clay Powder is comprised of thin layers and each layer has a thickness of one to a few nanometers length from a few hundred to several thousand nanometers. Nanparticles are utilized as fillers or additives in polymers for variety of desirable effects are receiving an increased interest for research and development. Different types of nanoparticles, such as nanocarbon, carbon nanotubes, nano-clays, and metal oxides, are recently employed to modify the polymer performance.
The viable interest is in the utilization of nano-clays for the alteration of polymeric material for numerous applications. This may be indicated from the increased commercial interest, and utilization of clay nanocomposites. It is an organic and hydrophilic. Moreover, the nanoclays are added in the polymers to increase the mechanical properties of polymers. In the nanocomposites, the permeability of the gases such as oxygen, carbon dioxide can be reduced by the addition of nanoclays. Nano clays have wide range of applications in food-packaging, pharmacy, used as a drug vehicle, textile industry etc.
Other Products
022220P1 Brilliant Green Lactose Bile Broth
Product Info
Document
Product Info
Introduction
Usages： For determination of coliform confirmatory test for multi-tube fermentation.
Principle: Peptone provide carbon and nitrogen sources; lactose as fermentable sugars; ox bile powder and brilliant green inhibit the non-Enterobacteriaceae.
Formulation (per liter): Peptone: 10g Lactose: 10g Ox bile powder: 20g Brilliant green: 0.0133g Final pH7.2 ± 0.2
How to use: 1.Suspend 40g of the product, add 1 L of distilled water, stirring heated to boiling until completely dissolved, packed in a test tube with a small inverted tube, autoclave at 121 ℃ for 15min, cool to room temperature and set aside. 2.Sample handling and dilution. Slightly. 3.Transplanted LST broth tube to brilliant green lactose bile broth tube by using a inoculating loop. 4.the tube was placed in an incubator culture at 36 ± 1 ℃ for 24h. 5.Observe the results. Press production trachea number, check table report MPN MPN value per gram (mL) sample of coliform bacteria.
Quality control: Quality control strains were inoculated and culuture at 36 ± 1 ℃ for 24h ,results are as follows: Bacterial Name Bacterial No. Growth Status Gassing Escherichia coli ATCC25922 good +
Salmonella typhimurium CMCC (B) 50115 good —
Staphylococcus aureus ATCC6538 inhibited —
Storage: Store in a dark, cool and dry place, tighten the cap immediately after use. Storage period of three years.
Isolate genomic DNA from all types of bacteria (both Gram-positive and Gram-negative)
Rapid and convenient spin column protocol
96-well format available for high throughput
High yield, high quality DNA for sensitive downstream applications including sequencing, PCR, qPCR and more
This kit is designed for the rapid spin column preparation of genomic DNA from 2 x 109 viable bacterial cells (between 0.5 and 1.0 mL of culture). This kit can be used for both Gram-negative and Gram-positive bacteria including Escherichia coli and Bacillus cereus. Purified genomic DNA is of an excellent quality and yield, and is fully compatible with restriction enzyme digestions, sequencing, PCR, qPCR and more. Also available in 96-well format for high throughput applications.
* Yield will vary depending on the type of sample processed
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 2 years after the date of shipment when stored at room temperature.
High yield and high quality genomic DNA with no RNA or protein contamination
DNA ready for any application including PCR, qPCR, genotyping and more
Norgen’s Cells and Tissue DNA Isolation Kits are designed for the rapid preparation of genomic DNA from cultured cells as well as various tissue samples and urine. The purified genomic DNA is fully digestible with all restriction enzymes tested, and is completely compatible with PCR and Southern Blot analysis.
Cells and Tissue DNA Isolation Kit (Spin Column)
Purification is based on spin column chromatography as the separation matrix. Norgen’s columns bind DNA under optimized salt concentrations and release the bound DNA under low salt and slightly alkali conditions. The protocol can be completed in approximately 30 minutes for cells and within 90 minutes for tissues. Each kit contains sufficient materials for 50 preparations.
Cells and Tissue DNA Isolation Micro Kit (Micro)
Optimized for small inputs of cells and tissues, such as Laser-Captured Microdissection (LCM). Purification is based on spin column chromatography as the separation matrix. Norgen’s columns bind DNA under optimized salt concentrations and release the bound DNA under low salt and slightly alkali conditions. Preparation time for a single sample is approximately 60 minutes, and each kit contains sufficient materials for 50 preparations.
Cells and Tissue DNA Isolation Kit (Magnetic Bead System)
Purification is based on the use of magnetic beads that bind DNA under optimized binding conditions. Norgen’s Cells and Tissue DNA Isolation Kit (Magnetic Bead System) allows for the isolation of genomic DNA from various types of animal tissues or cell samples. Preparation for 10 purifications is approximately 40 minutes of hands-on time.
Cells and Tissue DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)
Purification is based on the use of magnetic beads that bind DNA under optimized binding conditions. Norgen’s Cells and Tissue DNA Isolation 96-Well Kit (Magnetic Bead System) allows for the isolation of genomic DNA from various types of animal tissues or cell samples. The Cells and Tissue DNA Isolation 96-Well Kit (Magnetic Bead System) also can be integrated with a robotic automation system.
8-10 µg (20 mg of animal tissue) 8-12 µg (3 x 106 cells)
Average Purity (OD260/280)
1.8 – 1.9
Time to Complete 10 Purifications
40 minutes hands-on time (Cat. 59100) 50 minutes hands on time (Cat. 62500)
* Average DNA yield will vary depending on the donor
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature (15 – 25°C). This kit is stable for 1 year after the date of shipment.
