Exceptional value for money
Rapid detection of all clinically relevant subtypes
Positive copy number standard curve for quantification
Highly specific detection profile
High priming efficiency
Broad dynamic detection range (>6 logs)
Sensitive to < 100 copies of target
Accurate controls to confirm findings
150 reactions
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
Other Products
C13123 HiPure DNA Maxi Column III
Product Info
Document
Product Info
Introduction
Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.
The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.
Details
Specifications
Features
Specifications
Recommended application
Plasmid Maxi preparation
Preservation conditions
Room temperature
Stability
Up to 4 years
Filter membrane
High quality glass fiber filter GF/B, 8 layers
Membrane aperture
1.0 μm
Maximum binding yield of plasmid
1 mg
Maximum yield of alcohol mediated binding
5 mg
Plasmid yield
Up to 1mg
Single liquid carrying capacity of column
20 ml
Minimum elution volume
800 μl
Withstand centrifugal force
3,000-5,000 x g
Centrifuge
Low speed centrifuge for 50ml centrifuge tubes, >3000 x g, swing-out Rotor
Adsorption Mechanism
Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silicagel membrane, while other pollutants, mainly proteins, are removed by membrane washing.
Ordering information
CAT.No.
Product Name
Package
C13123
HiPure DNA Maxi Column III (8 x GF/B)with 50ml Collection Tubes
100/Bag
Purchase Guide
Item No.
Product Name
Membrane type/number of layers
Collection tubes
Plasmid DNA binding capacity (Physical adsorption)
Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.
Document
Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.
HiPure Insect DNA Kits provides a simple and rapid solution for total DNA extraction of insect tissue samples. This kit is based on silica gel column purification technology without toxic phenol chloroform extraction and time-consuming alcohol precipitation. The whole extraction process only takes 30 minutes. HiPure Insect DNA Kit can process tissue samples less than 10mg at a time. Hipure Insect DNA 96 kit can process 96 insect tissue samples at a high throughput. The obtained DNA can be directly used in PCR, Southern blot, viral DNA detection and other experiments.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from insect tissue
Applications
PCR, southern bolt and virus detection, etc
Purification method
96 well DNA plate
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Insect tissue samples
Sample amount
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column
Principles
This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High purity DNA – can be used in sensitive downstream applications such as multiplex and quantitative pcr
Good repeatability – suitable for extracting high-yield DNA from insect tissue samples
Safe – without phenol chloroform extraction and alcohol precipitation
Kit Contents
Contents
D313901
D313902
Purification Times
1 x 96
4 x 96
HiPure DNA Plate
1
4
2.2 ml Collection Plate
1
4
1.6 ml Collection Plate
1
4
0.5ml Collection Plate
1
4
Seal Film
8
32
Buffer ITL
30 ml
120 ml
Buffer IL
30 ml
125 ml
Buffer GW1
44 ml
2 x 110 ml
Buffer GW2
50 ml
3 x 50 ml
Proteinase K
50 mg
200 mg
Protease Dissolve Buffer
6 ml
15 ml
Buffer AE
20 ml
60 ml
Storage and Stability
Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2–8°C, but in thiscase buffers should be redissolved before use. Make sure that all buffers areat room temperature when used.
Document
HiPure Insect DNA Kits provides a simple and rapid solution for total DNA extraction of insect tissue samples. This kit is based on silica gel column purification technology without toxic phenol chloroform extraction and time-consuming alcohol precipitation. The whole extraction process only takes 30 minutes. HiPure Insect DNA Kit can process tissue samples less than 10mg at a time. Hipure Insect DNA 96 kit can process 96 insect tissue samples at a high throughput. The obtained DNA can be directly used in PCR, Southern blot, viral DNA detection and other experiments.
The Integrated Total Dietary Fiber test kit is suitable for the measurement and analysis of Integrated Total Dietary Fiber.
Updated to include resistant, branched maltodextrins as a component in dietary fiber.
K-INTDF – An Integrated Procedure (AOAC Method 2009.01 & 2011.25) for the measurement of Total Dietary Fiber (including resistant starch and non-digestible oligosaccharides). This method combines the key attributes of AOAC Official Methods of Analysis 2002.02, 985.29, 991.43, 2001.03.
Specific dietary fiber fractions are measured as follows:
2. Total High Molecular Weight Dietary Fiber (HMWDF) and SDFS determination (AOAC Method 2009.01)
The enzymes used in these methods are of very high purity; they are effectively devoid of contaminating enzymes active on β-glucan, pectin and arabinoxylan.
Data calculators are located in the Documents tab.
