Description
genesig® kits are sold for research use only and are not licensed for diagnostic procedures.
Exceptional value for money
Rapid detection of 2019-nCoV
Positive copy number standard curve for quantification
Highly specific detection profile
High priming efficiency
Broad dynamic detection range (>6 logs)
Sensitive to < 100 copies of target
Accurate controls to confirm findings
genesig® kits are sold for research use only and are not licensed for diagnostic procedures.
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request
K-LARGE
SKU: 700004309
50 Assays per kit
| Content: | 50 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 1 year under recommended storage conditions |
| Analyte: | Ammonia, L-Arginine, Nitrogen, Urea, YAN |
| Assay Format: | Spectrophotometer |
| Detection Method: | Absorbance |
| Wavelength (nm): | 340 |
| Signal Response: | Decrease |
| Linear Range: | 1.0 to 35 mg of L-arginine, 0.2 to 7.0 μg of ammonia and 0.3 to 14 µg of urea per assay |
| Limit of Detection: | 0.07 mg/L (ammonia), 0.13 mg/L (urea), 0.37 mg/L (L-arginine) |
| Reaction Time (min): | ~ 20 min [ammonia (2 min), urea (6 min), L-arginine (7 min)] |
| Application examples: | Grape juice, wine must, wine and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Improved method |
The L-Arginine/Urea/Ammonia test kit is specific and a rapid measurement and analysis of L-arginine, urea and ammonia in grape juice/must and wine.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
Display all of our nitrogen assay kit products.
Advantages
The L-Arginine/Urea/Ammonia test kit is specific and a rapid measurement and analysis of L-arginine, urea and ammonia in grape juice/must and wine.
This kit provides a rapid method for the isolation and purification of both cytoplasmic and nuclear RNA from cultured animal cells and small tissue samples. The kit can be used to isolate all sizes of RNA from the cytoplasmic and nuclear RNA fractions, including all small RNA species without any requirement for phenol. Included in the kit are sufficient reagents to perform either 50 cytoplasmic RNA preparations or 25 cytoplasmic and 25 nuclear RNA preparations. Ten samples can be processed in approximately 45 minutes. This kit is also available in a 100 prep size.
Background
In certain circumstances it is desirable to be able to isolate fractionated RNA as opposed to total RNA. For example, it may be preferable to isolate only mature, cytoplasmic RNA for some studies on expression profiling. Alternatively it may be desirable to isolate nuclear RNA in order to investigate and study pre-processed (non-spliced) RNA. Furthermore, this kit can be used to isolate RNA for downstream applications where it is necessary to avoid DNA contamination, since the cytoplasmic fraction has been shown to be free of all traces of genomic DNA.
Figure 1 / 4
Click for expanded view
| Kit Specifications | |
| Maximum Column Binding Capacity | Up to 50 µg RNA |
| Maximum Column Loading Volume | 650 µL |
| Size of RNA Purified | All sizes, including small RNA (< 200 nt) |
| Time to Complete 10 Purifications | 45 minutes |
| RNA Yield HeLa (1 x 106) – Cytoplasmic RNA HeLa (1 x 106) – Nuclear RNA | 15 µg ≤ 3.5 µg |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Component | Cat. 21000 (50 preps) | Cat. 37400 (100 preps) |
|---|---|---|
| Lysis Buffer J | 20 mL | 2 x 20 mL |
| Buffer SK | 40 mL | 2 x 40 mL |
| Wash Solution A | 38 mL | 2 x 38 mL |
| Elution Buffer E | 6 mL | 2 x 6 mL |
| Mini Spin Columns | 50 | 100 |
| Collection Tubes | 50 | 100 |
| Elution Tubes (1.7 mL) | 50 | 100 |
| Product Insert | 1 | 1 |