Description
Specifications
| Clone | IHC564 |
| Source | Mouse Monoclonal |
| Positive Control | Breast |
| Dilution Range | 1:200 |
E-cadherin is an intercellular adhesion molecule present in epithelial cells. Anti-E-cadherin stains glandular epithelium, as well as lung, gastrointestinal and ovarian adenocarcinomas. A panel of antibodies against E-cadherin and p120 is also used to differentiate ductal (membranous staining) and lobular breast cancer (cytoplasmic staining). Anti-E-cadherin also stains some thyroid cancers.
| Clone | IHC564 |
| Source | Mouse Monoclonal |
| Positive Control | Breast |
| Dilution Range | 1:200 |
K-INTDF
SKU: 700004305
100 assays per kit
| Content: | 100 assays per kit |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | Dietary Fiber |
| Assay Format: | Enzymatic |
| Detection Method: | Gravimetric/HPLC |
| Signal Response: | Increase |
| Limit of Detection: | 0.5 g/100 g |
| Total Assay Time: | ~ 3 h work (over 2 days) |
| Application examples: | Food ingredients, food products and other materials. |
| Method recognition: | AACC Method 32-45.01, AACC Method 32-50.01, AOAC Method 2009.01 and AOAC Method 2011.25 |
The Integrated Total Dietary Fiber test kit is suitable for the measurement and analysis of Integrated Total Dietary Fiber.
Updated to include resistant, branched maltodextrins as a component in dietary fiber.
K-INTDF – An Integrated Procedure (AOAC Method 2009.01 & 2011.25) for the measurement of Total Dietary Fiber (including resistant starch and non-digestible oligosaccharides). This method combines the key attributes of AOAC Official Methods of Analysis 2002.02, 985.29, 991.43, 2001.03.
Specific dietary fiber fractions are measured as follows:
1. Insoluble dietary fiber (IDF), Higher Molecular Weight Soluble Dietary Fiber (SDFP) and Lower Molecular Weight Soluble Dietary Fiber (SDFS) determination (AOAC Method 2011.25)
2. Total High Molecular Weight Dietary Fiber (HMWDF) and SDFS determination (AOAC Method 2009.01)
The enzymes used in these methods are of very high purity; they are effectively devoid of contaminating enzymes active on β-glucan, pectin and arabinoxylan.
Data calculators are located in the Documents tab.
See our full range of dietary fiber and starch products.
Validation of Methods
Advantages
The Integrated Total Dietary Fiber test kit is suitable for the measurement and analysis of Integrated Total Dietary Fiber.
Candida albicans is an opportunistic yeast and is the most common fungal pathogen found in the human body. C. albicans can be detected in the gastrointestinal tract, mouth, and vagina of approximately half of healthy adults. It is typically a commensal organism and makes up part of the natural human microflora; however it can overgrow and become pathogenic as a result of various conditions. For example, individuals who have taken recent courses of antibiotics, have a weakened immune system or have diabetes have an increased risk of developing a Candida albicans infection. When an overgrowth occurs, this can lead to common infections such as urinary tract infections, genital yeast infections, oral thrush, and mucocutaneous candidiasis. In the more severe cases, when Candida albicans enters the bloodstream or organs, it can lead to loss of sight, blood and bone infections, endocarditis, meningitis or inflammation of the intraabdominal lining.
Figure 1 / 3
Click for expanded view
Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
All kit components should be stored at -20°C upon arrival.
| Component | Cat. TM34050 (100 preps) | Cat. TM34010 (100 preps) |
|---|---|---|
| MDx TaqMan 2X PCR Master Mix | 2 x 700 μL | – |
| Candida albicans Primer & Probe Mix | 280 μL | 280 μL |
| Candida albicans Positive Control | 150 μL | 150 μL |
| Nuclease-Free Water (Negative Control) | 1.25 mL | 1.25 mL |
| Product Insert | 1 | 1 |
These kits concentrate urine proteins while simultaneously removing salts, urea, and other urine contaminants. There is no molecular weight cut-off and therefore the columns capture total urinary proteins and peptides of all sizes making them ideal for biomarker discovery work, differential expression of proteins in various diseases, or other diagnostic research. The columns are convenient, rapid and easy to use and thus offer significant time savings over classic dialysis protocols. The resulting high-quality protein sample is concentrated and free from the original sample salts, thus preparing the sample conveniently for downstream proteomic applications including SDS-PAGE, 2D Gels, MALDI-TOF, LC/MS, LC/MS/MS, whole protein mass spectrometry, western blotting, protein microarrays, and more.
ProteoSpin™ Urine Protein Concentration Micro Kit
Each spin column is able to concentrate and desalt up to 200 μg of urine proteins. Twelve samples can be processed in 20 minutes.
ProteoSpin™ Urine Protein Concentration Midi Kit
The ProteoSpin™ Urine Protein Concentration Midi Kit provides a fast and simple procedure for concentrating dilute solutions of urine proteins from 1 to 5 mL inputs of urine. Each mini spin column is able to concentrate and desalt up to 3 mg of urine proteins in 30 minutes.
ProteoSpin™ Urine Protein Concentration Maxi Kit
The ProteoSpin™ Urine Protein Concentration Maxi Kit provides a fast and simple procedure for concentrating dilute solutions of urine proteins from 2 to 20 mL inputs of urine. Each maxi spin column is able to concentrate and desalt up to 4 mg of urine proteins in 45 minutes.
Figure 1 / 7
Click for expanded view
| Kit Specifications | |
| Minimum Urine Volume Input | 1 mL |
| Maximum Urine Volume Input | 5 mL |
| Maximum Recovered Proteins (5 mL Urine) | 3 mg* |
| Elution Volume | 200 – 1000 μL |
| Time to Complete 10 Purifications | 30 minutes |
*Yield will depend on the health status of the donor.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. Once opened, the solution should be stored at 4°C. This kit is stable for 2 years after the date of shipment.
| Component | Cat. 17400 (25 preps) | Cat. 52300 (10 preps) | Cat. 21600 (4 preps) |
|---|---|---|---|
| Wash Solution C | 60 mL | 60 mL | 130 mL |
| Binding Buffer A | 4 mL | 4 mL | 8 mL |
| Elution Buffer C | 8 mL | 30 mL | 30 mL |
| Protein Neutralizer | 4 mL | 4 mL | 4 mL |
| Micro Spin Columns | 25 | – | – |
| Midi Spin Columns (assembled with collection tubes) | – | 10 | – |
| Maxi Spin Columns (assembled with collection tubes) | – | – | 4 |
| Collection Tubes | 25 | – | – |
| Elution Tubes (1.7 mL) | 25 | – | – |
| Midi Elution Tubes | – | 10 | – |
| Elution Tubes (50 mL) | – | – | 4 |
| Product Insert | 1 | 1 | 1 |
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : hej@a3p-scientific.com
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map