Introduction

The HiPure Minipreps system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Miniprep Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 30μg endotoxin-free plasmid DNA from 1-5ml bacterial culture using 96-well bind plate
Applications	Cell transfection, animal injection, etc.
Purification method	96 well plate
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Low copy plasmid vector
Sample amount	1-5ml LB（x96）
Yield	30μg
Elution volume	≥75μl
Time per run	≤60 minutes
Liquid carrying volume per column	800μl
Binding yield of column	70μg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

1. High throughput: processing 96 samples at once;
2. High yield: The purified plasmid yield can reach up to 30μg, which is greater than the yield of the magnetic bead method kit;
3. Detoxification: endotoxin content <0.1EU/μg;
4. Fast: The entire extraction can be completed in 60 minutes without the need for time-consuming alcohol precipitation;

Kit Contents

Contents	P115701	P115702	P115703
Purification Times	1 x 96 Preps	4 x 96 Preps	20 x 96 Preps
RNase A	10 mg	20 mg	100 mg
Buffer P1	30 ml	120 ml	550 ml
Buffer P2	30 ml	120 ml	550 ml
Buffer LEN3	15 ml	60 ml	300 ml
Buffer LN4	80 ml	270 ml	2 x 700 ml
Buffer LN5	40 ml	220 ml	1100 ml
Buffer PW1	40 ml	220 ml	1100 ml
Buffer PW2	25 ml	100 ml	2 x 200 ml
Elution Buffer	30 ml	60 ml	250 ml
Lysate Clear Plate	1	4	20
HiPure DNA Plate	1	4	20
1.6ml Collection Plate	2	8	40
0.5ml Collection Plate	1	4	20

Storage and Stability

The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Minipreps system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Miniprep Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

Overview

• RNA/microRNA/DNA/Proteins are preserved for more than 2 years at room temperature in Norgen’s Urine Preservative
• Compatible with most DNA, Total RNA, microRNA and protein isolation methods
• Preservative is available in a single dose liquid format (ampule)
• Preservative is also available in a dried format in tubes – Urine Collection and Preservation Tubes
• Urine Collection and Preservation Devices are available in 4 convenient sizes: 5 cc tubes, 15 cc tubes, 50 cc tubes, and 120 cc cups

Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.

Norgen’s Urine Preservative is available in 2 convenient formats:

1.  Urine Preservative Single Dose Ampules
With this product Norgen’s Urine Preservative is supplied in a liquid format in single dose ampules. The user simply collects 5 – 50 mL of urine into a urine collection container and adds the contents of the Urine Preservative Single Dose (Cat# 18126). The urine and preservative are then mixed, and the urine nucleic acids and proteins are preserved at room temperature.

2.  Urine Collection and Preservation Tubes
Norgen’s Urine Preservative is also available in a dried format in Norgen’s Urine Collection and Preservation Tubes. The user simply collects urine into the tubes and mixes gently until the orange preservative pellet in the tube has dissolved. Norgen’s Urine Collection and Preservation Tubes are available in 3 convenient sizes:

• 5 cc tubes, 1 – 5 mL of urine
• 15 cc tubes, 5 – 15 mL of urine
• 50 cc tubes, 5 – 45 mL of urine
• 120 cc cup, 100 – 120 mL of urine

Details

Supporting Data

Figure 1 / 2

Previous

Next

Click for expanded view

Select Urine Tested with the Norgen Urine Collection and Preservation Tubes

Human
Mouse
Lynx
Wolf
Urine collected from snow

Available Sizes and Formats 

1. Urine Collection and Preservation Tubes (5 cc) – Urine inputs from 1 – 5 mL

Storage Conditions and Product Stability
All tubes should be kept tightly sealed and stored at room temperature (15 – 25°C) for up to 2 years without any reduction in performance.

Kit Components	Cat. 18118 (50 tubes)	Cat. 18122 (50 tubes)	Cat. 18113 (50 tubes)	Cat. 18126 (50 tubes)	Cat. 18129 (1 cup)
Urine Collection and Preservation Tubes (5 cc)	50	–	–	–	–
Urine Collection and Preservation Tubes (15 cc)	–	50	–	–	–
Urine Collection and Preservation Tubes (50 cc)	–	–	50	–	–
Urine Preservative Single Dose	–	–	–	50	–
Urine Collection and Preservation Cup (120 cc)	–	–	–	–	1
ID Labels	50	–	–	50	–
Product Insert	1	1	1	1	1

Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.

Norgen’s Urine Preservative is available in 2 convenient formats:

Overview

• Detection kits for HPV (High and Low Risk)
• Lyophilized format designed for room temperature shipping
• Available in TaqMan format for analysis

Norgen’s HPV (High and Low Risk) TaqMan PCR Lyophilized Kit is designed for the detection of HPV High and Low Risk specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Norgen’s HPV (High and Low Risk) TaqMan Lyophilized Probe/Primer and Control Set is designed for the detection of HPV High and Low Risk specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Details

Supporting Data

Figure 1 / 4

Previous

Next

Click for expanded view

Storage Conditions and Product Stability

• All kit components should be stored at -20°C upon arrival.
• Once reconstituted, repeated thawing and freezing (>2 times) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
• Each kit is provided with 4 tubes of 2X PCR Master Mix and each tube is enough to run 25 reactions. It is not necessary to reconstitute all Master Mix tubes at once. The Master Mix tubes can be reconstituted as and when needed.
• All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

Component	Cat. TM31550L (100 preps)	Cat. TM31510L (100 preps)
MDx TaqMan 2X PCR Master Mix (Lyo)	4 x 350 μL	–
Mycoplasma Primer & Probe Mix (Lyo)	280 μL	280 μL
Mycoplasma Positive Control (Lyo)	150 μL	150 μL
Nuclease-Free Water (Negative Control)	3 x 1.25 mL	1 x 1.25 mL
Product Insert	1	1