Intended Use For the enumeration of enterococci in water and other liquids by the membrane filtration technique. Principle and Interpretation The growth of the entire accompanying Gram-neg……
Detail
Introduction
Intended Use
For the enumeration of enterococci in water and other liquids by the membrane filtration technique.
Principle and Interpretation
The growth of the entire accompanying Gram-negative microbial flora is inhibited by sodium azide. Enterococci reduce 2,3,5-Triphenyl tetrazolium chloride (TTC) to give a red formazan inside the bacterial cell, their colonies are thus red. Nitrogen, minerals, and amino acids are provided by the tryptose whilst yeast extract supplies vitamins. Glucose acts as the carbon source, dipotassium phosphate buffers the medium, and agar-agar is the solidifying agent.
Formulation
Ingredients
/liter
Tryptose
20.0g
Yeast extract
5.0g
Glucose
2.0g
Disodium hydrogen phosphate
4.0g
Sodium azide
0.4g
2,3,5-Triphenyl Tetrazolium chloride
0.1g
Agar
10.0g
pH 7.2±0.1 at 25°C
Preparation
Dissolve 41.5 g in 1 L of purified water. Heat in boiling water and agitate frequently until completely dissolved. Sterilize by further heat for 20 minutes in the boiling water bath.
Quality Control
Cultural characteristics observed after incubation at 34-38°C for 40-48hours
Quality control strains
Growth
Colony color
Enterococcus faecalis ATCC29212
Good growth,PR≥0.5
deep red coloured colonies
Escherichia coli ATCC25922
Total inhibition
–
Sorage and Shelf Life
Keep container tightly closed, store in a cool, dry place, away from bright light. Storage period of 3 years.
Precautions
1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort
2. Keep container tightly closed after using to prevent clumping.
Waste Disposal
Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.
Other Products
R4310 HiPure Universal miRNA Kit
Product Info
Document
Product Info
Introduction
The Kit is designed for purification of total RNA, including miRNA and other small RNA molecules (18nt), from cultured cells and various animal and human tissues, including difficult-to-lyse tissues samples. Alternatively, a miRNA-enriched fraction and a total RNA (>200nt) fraction can be purified separately. This Kit combines phenol/guanidine-based lysis of samples and silica membrane–based purification of total RNA. MagZol Reagent, included in the kits, is a monophasic solution of phenol and guanidine thiocyanate, designed to facilitate lysis of tissues, to inhibit RNases, and also to remove most of the cellular DNA and proteins from the lysate by organic extraction.
Details
Specifications
Features
Specifications
Main Functions
Isolation miRNA and other small RNA molecules(18nt), from cultured cells and various animal and human tissues, using MagZol reagent and column
Applications
RT-PCR, Northern Blot, poly A+purification, nucleic acid protection and in vitro translation
Hipure silica gel column is based on glass fiber filter membrane with high binding force. Under the condition of high concentration of ionizing agent (such asguanidine hydrochloride or guanidine isothiocyanate), the filter membrane can adsorb nucleic acid through hydrogen bond and electrostatic, while protein andother impurities are not adsorbed and removed. The filter membrane adsorbed with nucleic acid is washed to remove the residual protein and salt. Finally, the nucleic acid adsorbed on the filter membrane can be washed out with low salt buffer (such as buffer TE) or water. The obtained nucleic acid has high purity and can be directly used in various downstream experiments.
This kit combines acid/guanidine (MagZol) extraction technology with glass fiber filter membrane purification, which can improve the extraction effect of complex samples and samples with low RNA content. After the sample is treated with MagZol reagent and chloroform, the supernatant is added with ethanol to provide appropriate binding conditions, then transferred to the purification column and centrifuged. Macromolecular RNA can be efficiently bound to the membrane. Collect the filtrate containing small RNA, add more ethanol to adjust the binding capacity of small RNA, the pollutants can be efficiently washed away by second cleaning. Finally, the purified RNA was eluted by RNase free water.
Advantages
High quality – one step RNA extraction reagent combined with silica gel column can obtain the highest concentration
Fast – several samples can be extracted in 40 minutes
High applicability – samples including animals, plants, bacteria, cells, etc.
High concentration – efficiently remove macromolecular RNA, enrich small RNA and improve sensitivity
Kit Contents
Contents
R431002
R431003
Purification Times
50 Preps
250 Preps
HiPure RNA Mini Columns
100
2 x 250
2ml Collection Tubes
100
2 x 250
MagZol Reagent
60 ml
270 ml
Buffer RWC
20 ml
80 ml
Buffer RW2*
20 ml
2 x 50 ml
RNase Free Water
10 ml
30 ml
Storage and Stability
MagZol Reagent should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect its performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
Document
The Kit is designed for purification of total RNA, including miRNA and other small RNA molecules (18nt), from cultured cells and various animal and human tissues, including difficult-to-lyse tissues samples. Alternatively, a miRNA-enriched fraction and a total RNA (>200nt) fraction can be purified separately. This Kit combines phenol/guanidine-based lysis of samples and silica membrane–based purification of total RNA. MagZol Reagent, included in the kits, is a monophasic solution of phenol and guanidine thiocyanate, designed to facilitate lysis of tissues, to inhibit RNases, and also to remove most of the cellular DNA and proteins from the lysate by organic extraction.
This ELISA kit is intended for the quantitative detection of IgG antibodies against parasites of Ascaris genus in human serum.
This product is manufactured by Bordier Affinity Products in Switzerland and distributed in Germany exclusively by Milenia Biotec.
Method/Platform
ELISA in microplate format
Range/Assay Sensivity
pNPP, λ=405 nm
Test Principle
Specific antibodies in the sample bind to Ascaris solubles coelomics antigens. The presence of parasite specific antibodies is detected with a Protein A alkaline phosphatase conjugate.
12 x 8 strips (96 tests) This ELISA kit is intended for the quantitative detection of IgG antibodies against parasites of Ascaris genus in human serum.
This product is manufactured by Bordier Affinity Products in Switzerland and distributed in Germany exclusively by Milenia Biotec.
The ITS1 Library Preparation Kit for Illumina consists of the reagents and components required for library preparation of the fungal target ITS1 libraries to be used for next-generation sequencing on Illumina platforms. All molecular reagents including primers, enzyme mixes, indexes, and buffers are provided. Instructions for PCR clean up with the AMPure XPMagneticBeads(supplied by customer) are also included for rapid purification of nucleic acid products generated at two steps of the workflow. The library prep workflow could be used for purified DNA inputs from different sources including stool, soil, water, saliva, plant, urine, skin swab, vaginal swab, cheek swab, nasal/swab, plasma/serum, tongue swab, gum swab, and others.
The ITS1 Library Preparation Kit for Illumina has a streamlined procedure that reduces the handling time such that the library prep procedure can be completed in approximately 4 hours (see diagram below). Input DNA is first subjected to targeted PCR to amplify the ITS1 region of the fungal DNA.The post-PCR reaction is then cleaned up using AMPure XPbeads. Dual index primers are then added using a limited-cycle PCR. The indexed amplicons flanked by 5′ and 3′ barcoded adaptors are then cleaned using AMPure XPbeads. The libraries are then ready for quantification, pooling and sequencing.
Storage Conditions and Product Stability Norgen’s ITS1 Library Prep Kit for Illumina is shipped as one kit box (for the 24 prep kit) or two sub-component kits (for the 96 prep kit). All kits should be stored at -20°C upon arrival.
All kit components will remain stable for at least 1 year when stored at the specified storage conditions.
